[PATCH] pmdomain: arm: Fix NULL dereference on scmi_perf_domain removal

[Sudeep Holla]

On Thu, Jan 25, 2024 at 07:17:56PM +0000, Cristian Marussi wrote:
> On unloading of the scmi_perf_domain module got the below splat, when in
> the DT provided to the system under test the '#power-domain-cells' property
> was missing.
> Indeed, this particular setup causes the probe to bail out early without
> giving any error, so that, then, the removal code is run on unload, but
> without all the expected initialized structures in place.
> 
> Add a check and bail out early on remove too.
> 
> Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
> Mem abort info:
>    ESR = 0x0000000096000004
>    EC = 0x25: DABT (current EL), IL = 32 bits
>    SET = 0, FnV = 0
>    EA = 0, S1PTW = 0
>    FSC = 0x04: level 0 translation fault
>  Data abort info:
>    ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
>    CM = 0, WnR = 0, TnD = 0, TagAccess = 0
>    GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
>  user pgtable: 4k pages, 48-bit VAs, pgdp=00000001076e5000
>  [0000000000000008] pgd=0000000000000000, p4d=0000000000000000
>  Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
>  Modules linked in: scmi_perf_domain(-) scmi_module scmi_core
>  CPU: 0 PID: 231 Comm: rmmod Not tainted 6.7.0-00084-gb4b1f27d3b83-dirty #15
>  Hardware name: linux,dummy-virt (DT)
>  pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
>  pc : scmi_perf_domain_remove+0x28/0x70 [scmi_perf_domain]
>  lr : scmi_perf_domain_remove+0x28/0x70 [scmi_perf_domain]


>  sp : ffff80008393bc10
>  x29: ffff80008393bc10 x28: ffff0000875a8000 x27: 0000000000000000
>  x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
>  x23: ffff00008030c090 x22: ffff00008032d490 x21: ffff80007b287050
>  x20: 0000000000000000 x19: ffff00008032d410 x18: 0000000000000000
>  x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
>  x14: 8ba0696d05013a2f x13: 0000000000000000 x12: 0000000000000002
>  x11: 0101010101010101 x10: ffff00008510cff8 x9 : ffff800080a6797c
>  x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d
>  x5 : 8080808000000000 x4 : 0000000000000020 x3 : 00000000553a3dc1
>  x2 : ffff0000875a8000 x1 : ffff0000875a8000 x0 : ffff800082ffa048

These can be dropped as they are not useful.

>  Call trace:
>   scmi_perf_domain_remove+0x28/0x70 [scmi_perf_domain]
>   scmi_dev_remove+0x28/0x40 [scmi_core]
>   device_remove+0x54/0x90
>   device_release_driver_internal+0x1dc/0x240
>   driver_detach+0x58/0xa8
>   bus_remove_driver+0x78/0x108
>   driver_unregister+0x38/0x70
>   scmi_driver_unregister+0x28/0x180 [scmi_core]
>   scmi_perf_domain_driver_exit+0x18/0xb78 [scmi_perf_domain]
>   __arm64_sys_delete_module+0x1a8/0x2c0
>   invoke_syscall+0x50/0x128
>   el0_svc_common.constprop.0+0x48/0xf0
>   do_el0_svc+0x24/0x38
>   el0_svc+0x34/0xb8
>   el0t_64_sync_handler+0x100/0x130
>   el0t_64_sync+0x190/0x198
>  Code: a90153f3 f9403c14 f9414800 955f8a05 (b9400a80)
>  ---[ end trace 0000000000000000 ]---
> 
> Cc: Sudeep Holla <sudeep.holla at arm.com>

Reviewed-by: Sudeep Holla <sudeep.holla at arm.com>

-- 
Regards,
Sudeep