[PATCH] arm64: dts: mediatek: mt8183-kukui-jacuzzi: Add ports node for anx7625

Chen-Yu Tsai wenst at chromium.org
Wed Jan 31 00:39:29 PST 2024


The anx7625 binding requires a "ports" node as a container for the
"port" nodes. The jacuzzi dtsi file is missing it.

Add a "ports" node under the anx7625 node, and move the port related
nodes and properties under it.

Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
---
 .../dts/mediatek/mt8183-kukui-jacuzzi.dtsi    | 25 +++++++++++--------
 1 file changed, 14 insertions(+), 11 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 6d4b225a592b..783c333107bc 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -150,21 +150,24 @@ anx_bridge: anx7625 at 58 {
 		vdd18-supply = <&pp1800_mipibrdg>;
 		vdd33-supply = <&vddio_mipibrdg>;
 
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port at 0 {
-			reg = <0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
 
-			anx7625_in: endpoint {
-				remote-endpoint = <&dsi_out>;
+			port at 0 {
+				reg = <0>;
+
+				anx7625_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
 			};
-		};
 
-		port at 1 {
-			reg = <1>;
+			port at 1 {
+				reg = <1>;
 
-			anx7625_out: endpoint {
-				remote-endpoint = <&panel_in>;
+				anx7625_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
 			};
 		};
 
-- 
2.43.0.429.g432eaa2c6b-goog




More information about the linux-arm-kernel mailing list