[PATCH 2/2] arm64: dts: ti: k3-am65: Add full compatible to SerDes control nodes

Andrew Davis afd at ti.com
Tue Jan 30 11:51:28 PST 2024


This matches the binding for this register region which fixes a couple
DTS check warnings.

While here trim the leading 0s from the "reg" definition.

Signed-off-by: Andrew Davis <afd at ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index fcea544656360..62a68740dac6e 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -483,13 +483,13 @@ scm_conf: scm-conf at 100000 {
 		ranges = <0x0 0x0 0x00100000 0x1c000>;
 
 		serdes0_clk: clock at 4080 {
-			compatible = "syscon";
-			reg = <0x00004080 0x4>;
+			compatible = "ti,am654-serdes-ctrl", "syscon";
+			reg = <0x4080 0x4>;
 		};
 
 		serdes1_clk: clock at 4090 {
-			compatible = "syscon";
-			reg = <0x00004090 0x4>;
+			compatible = "ti,am654-serdes-ctrl", "syscon";
+			reg = <0x4090 0x4>;
 		};
 
 		serdes_mux: mux-controller {
-- 
2.39.2




More information about the linux-arm-kernel mailing list