[PATCH] arm64: dts: mediatek: mt8195: Add MTU3 nodes and correctly describe USB
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Tue Jan 30 03:32:35 PST 2024
Il 15/01/24 09:43, AngeloGioacchino Del Regno ha scritto:
> The MT8195 SoC has four USB controllers: only one is a direct path to
> a XHCI controller, while the other three (0, 2 and 3) are behind the
> MTU3 DRD controller instead!
>
> Add the missing MTU3 nodes, default disabled, for controllers 0, 2 and
> 3 and move the related XHCI nodes to be children of their MTU3 DRD to
> correctly describe the SoC.
>
> In order to retain USB functionality on all of the MT8195 and MT8395
> boards, also move the vusb33 supply and enable the relevant MTU3 nodes
> with special attention to the MT8195 Cherry Chromebook, where it was
> necessary to set the dr_mode of all MTU3 controllers to host to avoid
> interfering with the EC performing DRD on its own.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
Hello Chen-Yu,
even though I've carefully tested that on my MT8195 Chromebook, can you please
check this one?
Four eyes are better than two. :-)
P.S.: Sorry, I forgot to Cc you in the first submission....
Thanks,
Angelo
> ---
>
> Depends on [1]
>
> This patch was tested on a MT8395 board and on the MT8195 Cherry
> Tomato Chromebook.
>
> [1]: https://lore.kernel.org/all/20240112133222.240038-1-angelogioacchino.delregno@collabora.com
>
> .../boot/dts/mediatek/mt8195-cherry.dtsi | 26 +++-
> arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 18 ++-
> arch/arm64/boot/dts/mediatek/mt8195-evb.dts | 12 ++
> arch/arm64/boot/dts/mediatek/mt8195.dtsi | 125 +++++++++++-------
> .../dts/mediatek/mt8395-genio-1200-evk.dts | 17 ++-
> 5 files changed, 140 insertions(+), 58 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
> index a136bea99d9c..e563a2dc4cce 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
> @@ -1293,11 +1293,32 @@ &uart0 {
> status = "okay";
> };
>
> +/*
> + * For the USB Type-C ports the role and alternate modes switching is
> + * done by the EC so we set dr_mode to host to avoid interfering.
> + */
> +&ssusb0 {
> + dr_mode = "host";
> + vusb33-supply = <&mt6359_vusb_ldo_reg>;
> + status = "okay";
> +};
> +
> +&ssusb2 {
> + dr_mode = "host";
> + vusb33-supply = <&mt6359_vusb_ldo_reg>;
> + status = "okay";
> +};
> +
> +&ssusb3 {
> + dr_mode = "host";
> + vusb33-supply = <&mt6359_vusb_ldo_reg>;
> + status = "okay";
> +};
> +
> &xhci0 {
> status = "okay";
>
> rx-fifo-depth = <3072>;
> - vusb33-supply = <&mt6359_vusb_ldo_reg>;
> vbus-supply = <&usb_vbus>;
> };
>
> @@ -1311,8 +1332,6 @@ &xhci1 {
>
> &xhci2 {
> status = "okay";
> -
> - vusb33-supply = <&mt6359_vusb_ldo_reg>;
> vbus-supply = <&usb_vbus>;
> };
>
> @@ -1321,7 +1340,6 @@ &xhci3 {
>
> /* MT7921's USB Bluetooth has issues with USB2 LPM */
> usb2-lpm-disable;
> - vusb33-supply = <&mt6359_vusb_ldo_reg>;
> vbus-supply = <&usb_vbus>;
> };
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> index 69c7f3954ae5..9872743f743f 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> @@ -528,8 +528,22 @@ &u3phy3 {
> status = "okay";
> };
>
> -&xhci0 {
> +&ssusb0 {
> + vusb33-supply = <&mt6359_vusb_ldo_reg>;
> + status = "okay";
> +};
> +
> +&ssusb2 {
> vusb33-supply = <&mt6359_vusb_ldo_reg>;
> + status = "okay";
> +};
> +
> +&ssusb3 {
> + vusb33-supply = <&mt6359_vusb_ldo_reg>;
> + status = "okay";
> +};
> +
> +&xhci0 {
> vbus-supply = <&otg_vbus_regulator>;
> status = "okay";
> };
> @@ -540,11 +554,9 @@ &xhci1 {
> };
>
> &xhci2 {
> - vusb33-supply = <&mt6359_vusb_ldo_reg>;
> status = "okay";
> };
>
> &xhci3 {
> - vusb33-supply = <&mt6359_vusb_ldo_reg>;
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
> index 690dc7717f2c..341b6e074139 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
> @@ -160,6 +160,18 @@ &uart0 {
> status = "okay";
> };
>
> +&ssusb0 {
> + status = "okay";
> +};
> +
> +&ssusb2 {
> + status = "okay";
> +};
> +
> +&ssusb3 {
> + status = "okay";
> +};
> +
> &xhci0 {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> index 152cc0b191bb..45f278efd946 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -1349,29 +1349,40 @@ queue3 {
> };
> };
>
> - xhci0: usb at 11200000 {
> - compatible = "mediatek,mt8195-xhci",
> - "mediatek,mtk-xhci";
> - reg = <0 0x11200000 0 0x1000>,
> - <0 0x11203e00 0 0x0100>;
> + ssusb0: usb at 11201000 {
> + compatible = "mediatek,mt8195-mtu3", "mediatek,mtu3";
> + reg = <0 0x11201000 0 0x2dff>, <0 0x11203e00 0 0x0100>;
> reg-names = "mac", "ippc";
> - interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
> - phys = <&u2port0 PHY_TYPE_USB2>,
> - <&u3port0 PHY_TYPE_USB3>;
> - assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
> - <&topckgen CLK_TOP_SSUSB_XHCI>;
> - assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
> - <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
> + ranges = <0 0 0 0x11200000 0 0x3f00>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH 0>;
> clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>,
> <&topckgen CLK_TOP_SSUSB_REF>,
> - <&apmixedsys CLK_APMIXED_USB1PLL>,
> - <&clk26m>,
> <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>;
> - clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
> - "xhci_ck";
> - mediatek,syscon-wakeup = <&pericfg 0x400 103>;
> + clock-names = "sys_ck", "ref_ck", "mcu_ck";
> + phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
> wakeup-source;
> + mediatek,syscon-wakeup = <&pericfg 0x400 103>;
> status = "disabled";
> +
> + xhci0: usb at 0 {
> + compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
> + reg = <0 0 0 0x1000>;
> + reg-names = "mac";
> + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
> + assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
> + <&topckgen CLK_TOP_SSUSB_XHCI>;
> + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
> + <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
> + clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>,
> + <&topckgen CLK_TOP_SSUSB_REF>,
> + <&apmixedsys CLK_APMIXED_USB1PLL>,
> + <&clk26m>,
> + <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>;
> + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
> + status = "disabled";
> + };
> };
>
> mmc0: mmc at 11230000 {
> @@ -1452,52 +1463,68 @@ xhci1: usb at 11290000 {
> status = "disabled";
> };
>
> - xhci2: usb at 112a0000 {
> - compatible = "mediatek,mt8195-xhci",
> - "mediatek,mtk-xhci";
> - reg = <0 0x112a0000 0 0x1000>,
> - <0 0x112a3e00 0 0x0100>;
> + ssusb2: usb at 112a1000 {
> + compatible = "mediatek,mt8195-mtu3", "mediatek,mtu3";
> + reg = <0 0x112a1000 0 0x2dff>, <0 0x112a3e00 0 0x0100>;
> reg-names = "mac", "ippc";
> - interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
> - phys = <&u2port2 PHY_TYPE_USB2>;
> - assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>,
> - <&topckgen CLK_TOP_SSUSB_XHCI_2P>;
> - assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
> - <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
> + ranges = <0 0 0 0x112a0000 0 0x3f00>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>;
> + assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>;
> + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
> clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
> <&topckgen CLK_TOP_SSUSB_P2_REF>,
> - <&clk26m>,
> - <&clk26m>,
> <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
> - clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
> - "xhci_ck";
> - mediatek,syscon-wakeup = <&pericfg 0x400 105>;
> + clock-names = "sys_ck", "ref_ck", "mcu_ck";
> + phys = <&u2port2 PHY_TYPE_USB2>;
> wakeup-source;
> + mediatek,syscon-wakeup = <&pericfg 0x400 105>;
> status = "disabled";
> +
> + xhci2: usb at 0 {
> + compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
> + reg = <0 0 0 0x1000>;
> + reg-names = "mac";
> + interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
> + assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_2P>;
> + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
> + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
> + clock-names = "sys_ck";
> + status = "disabled";
> + };
> };
>
> - xhci3: usb at 112b0000 {
> - compatible = "mediatek,mt8195-xhci",
> - "mediatek,mtk-xhci";
> - reg = <0 0x112b0000 0 0x1000>,
> - <0 0x112b3e00 0 0x0100>;
> + ssusb3: usb at 112b1000 {
> + compatible = "mediatek,mt8195-mtu3", "mediatek,mtu3";
> + reg = <0 0x112b1000 0 0x2dff>, <0 0x112b3e00 0 0x0100>;
> reg-names = "mac", "ippc";
> - interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
> - phys = <&u2port3 PHY_TYPE_USB2>;
> - assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>,
> - <&topckgen CLK_TOP_SSUSB_XHCI_3P>;
> - assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
> - <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
> + ranges = <0 0 0 0x112b0000 0 0x3f00>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH 0>;
> + assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>;
> + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
> clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
> <&topckgen CLK_TOP_SSUSB_P3_REF>,
> - <&clk26m>,
> - <&clk26m>,
> <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
> - clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
> - "xhci_ck";
> - mediatek,syscon-wakeup = <&pericfg 0x400 106>;
> + clock-names = "sys_ck", "ref_ck", "mcu_ck";
> + phys = <&u2port3 PHY_TYPE_USB2>;
> wakeup-source;
> + mediatek,syscon-wakeup = <&pericfg 0x400 106>;
> status = "disabled";
> +
> + xhci3: usb at 0 {
> + compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
> + reg = <0 0 0 0x1000>;
> + reg-names = "mac";
> + interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
> + assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_3P>;
> + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
> + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
> + clock-names = "sys_ck";
> + status = "disabled";
> + };
> };
>
> pcie0: pcie at 112f0000 {
> diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
> index 7fc515a07c65..1558649f633c 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
> @@ -880,6 +880,21 @@ &ufsphy {
> status = "disabled";
> };
>
> +&ssusb0 {
> + vusb33-supply = <&mt6359_vusb_ldo_reg>;
> + status = "okay";
> +};
> +
> +&ssusb2 {
> + vusb33-supply = <&mt6359_vusb_ldo_reg>;
> + status = "okay";
> +};
> +
> +&ssusb3 {
> + vusb33-supply = <&mt6359_vusb_ldo_reg>;
> + status = "okay";
> +};
> +
> &xhci0 {
> status = "okay";
> };
> @@ -890,11 +905,9 @@ &xhci1 {
> };
>
> &xhci2 {
> - vusb33-supply = <&mt6359_vusb_ldo_reg>;
> status = "okay";
> };
>
> &xhci3 {
> - vusb33-supply = <&mt6359_vusb_ldo_reg>;
> status = "okay";
> };
More information about the linux-arm-kernel
mailing list