[PATCH v2 2/2] arm64: dts: mediatek: mt8183-pico6: Fix bluetooth node

[Chen-Yu Tsai]

On Tue, Jan 30, 2024 at 12:31 AM Paul Menzel <pmenzel at molgen.mpg.de> wrote:
>
> Dear Chen-Yu,
>
>
> Thank you for your patch.
>
> Am 26.01.24 um 07:34 schrieb Chen-Yu Tsai:
> > Bluetooth is not a random device connected to the MMC/SD controller. It
> > is function 2 of the SDIO device.
> >
> > Fix the address of the bluetooth node. Also fix the node name and drop
> > the label.
>
> Excuse my ignorance: Is this a cosmetic fix or does it fix the device
> somehow?

It's a cosmetic change, since the driver already searches the whole device
tree for the specific compatible string. However it also fixes the device
tree description to match the actual hardware.

> > Fixes: 055ef10ccdd4 ("arm64: dts: mt8183: Add jacuzzi pico/pico6 board")
> > Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
> > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> > ---
> > Changes since v1:
> > - Collected reviewed-by
> >
> >   arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts | 3 ++-
> >   1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
> > index a2e74b829320..6a7ae616512d 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
> > @@ -82,7 +82,8 @@ pins-clk {
> >   };
> >
> >   &mmc1 {
> > -     bt_reset: bt-reset {
> > +     bluetooth at 2 {
> > +             reg = <2>;
>
> To avoid confusion, would it be possible to use sdio as a “name”.

Not sure where the confusion is. Bluetooth is the functionality this
SDIO function provides.

ChenYu

>
> >               compatible = "mediatek,mt7921s-bluetooth";
> >               pinctrl-names = "default";
> >               pinctrl-0 = <&bt_pins_reset>;
>
>
> Kind regards,
>
> Paul