[PATCH v2 5/7] arm64: dts: exynos: gs101: enable cmu-peric1 clock controller

[André Draszik]

Enable the cmu-peric1 clock controller. It feeds additional USI, I3C
and PWM interfaces / busses.

Note that &sysreg_peric1 needs a clock to be able to access its
registers and now that Linux knows about this clock, we need to add it
in this commit as well so as to keep &sysreg_peric1 working, so that
the clock can be enabled as and when needed.

Signed-off-by: André Draszik <andre.draszik at linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko at linaro.org>
Reviewed-by: Peter Griffin <peter.griffin at linaro.org>

---
v2:
* merge patch #8 from original series version 1 into this patch, i.e.
add the clock to &sysreg_peric1 in this commit & update commit message
* collect Reviewed-by: tags
---
 arch/arm64/boot/dts/exynos/google/gs101.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index aaac04df5e65..e1bcf490309a 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -429,9 +429,20 @@ serial_0: serial at 10a00000 {
 			};
 		};
 
+		cmu_peric1: clock-controller at 10c00000 {
+			compatible = "google,gs101-cmu-peric1";
+			reg = <0x10c00000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&ext_24_5m>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_IP>;
+			clock-names = "oscclk", "bus", "ip";
+		};
+
 		sysreg_peric1: syscon at 10c20000 {
 			compatible = "google,gs101-peric1-sysreg", "syscon";
 			reg = <0x10c20000 0x10000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_SYSREG_PERIC1_PCLK>;
 		};
 
 		pinctrl_peric1: pinctrl at 10c40000 {
-- 
2.43.0.429.g432eaa2c6b-goog