[PATCH RESEND v7 1/7] drm: atmel-hlcdc: add flag and driver ops to differentiate XLCDC and HLCDC IP

[Manikandan Muralidharan]

Add is_xlcdc flag and LCD IP specific ops in driver data to differentiate
XLCDC and HLCDC code within the atmel-hlcdc driver files.

Signed-off-by: Manikandan Muralidharan <manikandan.m at microchip.com>
---
 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h | 37 ++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
index 5b5c774e0edf..d5e01ff8c7f9 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
@@ -177,6 +177,9 @@ struct atmel_hlcdc_layer_cfg_layout {
 	int csc;
 };
 
+struct atmel_hlcdc_plane_state;
+struct atmel_hlcdc_dc;
+
 /**
  * Atmel HLCDC DMA descriptor structure
  *
@@ -288,6 +291,36 @@ atmel_hlcdc_layer_to_plane(struct atmel_hlcdc_layer *layer)
 	return container_of(layer, struct atmel_hlcdc_plane, layer);
 }
 
+/**
+ * struct atmel_lcdc_dc_ops - describes atmel_lcdc ops group
+ * to differentiate HLCDC and XLCDC IP code support.
+ * @plane_setup_scaler: update the vertical and horizontal scaling factors
+ * @update_lcdc_buffers: update the each LCDC layers DMA registers.
+ * @lcdc_atomic_disable: disable LCDC interrupts and layers
+ * @lcdc_update_general_settings: update each LCDC layers general
+ * confiugration register.
+ * @lcdc_atomic_update: enable the LCDC layers and interrupts.
+ * @lcdc_csc_init: update the color space conversion co-efficient of
+ * High-end overlay register.
+ * @lcdc_irq_dbg: to raise alert incase of interrupt overrun in any LCDC layer.
+ */
+struct atmel_lcdc_dc_ops {
+	void (*plane_setup_scaler)(struct atmel_hlcdc_plane *plane,
+				   struct atmel_hlcdc_plane_state *state);
+	void (*update_lcdc_buffers)(struct atmel_hlcdc_plane *plane,
+				    struct atmel_hlcdc_plane_state *state,
+				    u32 sr, int i);
+	void (*lcdc_atomic_disable)(struct atmel_hlcdc_plane *plane);
+	void (*lcdc_update_general_settings)(struct atmel_hlcdc_plane *plane,
+					     struct atmel_hlcdc_plane_state *state);
+	void (*lcdc_atomic_update)(struct atmel_hlcdc_plane *plane,
+				   struct atmel_hlcdc_dc *dc);
+	void (*lcdc_csc_init)(struct atmel_hlcdc_plane *plane,
+			      const struct atmel_hlcdc_layer_desc *desc);
+	void (*lcdc_irq_dbg)(struct atmel_hlcdc_plane *plane,
+			     const struct atmel_hlcdc_layer_desc *desc);
+};
+
 /**
  * Atmel HLCDC Display Controller description structure.
  *
@@ -304,8 +337,10 @@ atmel_hlcdc_layer_to_plane(struct atmel_hlcdc_layer *layer)
  * @conflicting_output_formats: true if RGBXXX output formats conflict with
  *				each other.
  * @fixed_clksrc: true if clock source is fixed
+ * @is_xlcdc: true if XLCDC IP is supported
  * @layers: a layer description table describing available layers
  * @nlayers: layer description table size
+ * @ops: atmel lcdc dc ops
  */
 struct atmel_hlcdc_dc_desc {
 	int min_width;
@@ -317,8 +352,10 @@ struct atmel_hlcdc_dc_desc {
 	int max_hpw;
 	bool conflicting_output_formats;
 	bool fixed_clksrc;
+	bool is_xlcdc;
 	const struct atmel_hlcdc_layer_desc *layers;
 	int nlayers;
+	const struct atmel_lcdc_dc_ops *ops;
 };
 
 /**
-- 
2.25.1