[PATCH 4/4] arm64: dts: sun50i-a64-pinephone: change led type to status

[Aren Moynihan]

The status function is described in the documentation as being a rgb led
used for system notifications on phones[1][2]. This is exactly what this
led is used for on the PinePhone, so using status is probably more
accurate than indicator.

1: Documentation/leds/well-known-leds.txt
2: include/dt-bindings/leds/common.h

Signed-off-by: Aren Moynihan <aren at peacevolution.org>
---
I can't find any documentation describing the indicator function, so
it's definitely less specific than status, but besides that I'm not sure
how it compares.

Please ignore this patch if it's not useful and/or just causing churn.

 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index 6eab61a12cd8..4f39cfeb13ec 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -40,21 +40,21 @@ leds {
 		compatible = "gpio-leds";
 
 		led0: led-0 {
-			function = LED_FUNCTION_INDICATOR;
+			function = LED_FUNCTION_STATUS;
 			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
 			retain-state-suspended;
 		};
 
 		led1: led-1 {
-			function = LED_FUNCTION_INDICATOR;
+			function = LED_FUNCTION_STATUS;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
 			retain-state-suspended;
 		};
 
 		led2: led-2 {
-			function = LED_FUNCTION_INDICATOR;
+			function = LED_FUNCTION_STATUS;
 			color = <LED_COLOR_ID_RED>;
 			gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
 			retain-state-suspended;
@@ -64,7 +64,7 @@ led2: led-2 {
 	multi-led {
 		compatible = "leds-group-multicolor";
 		color = <LED_COLOR_ID_RGB>;
-		function = LED_FUNCTION_INDICATOR;
+		function = LED_FUNCTION_STATUS;
 		leds = <&led0>, <&led1>, <&led2>;
 	};
 
-- 
2.43.0