[PATCH 3/4] arm64: dts: rockchip: rename vcc5v0_usb30_host regulator for Cool Pi CM5 EVB

[Dragan Simic]

On 2024-01-27 13:15, Andy Yan wrote:
> At 2024-01-27 18:36:40, "Heiko Stübner" <heiko at sntech.de> wrote:
>> Am Samstag, 27. Januar 2024, 10:20:33 CET schrieb Andy Yan:
>>> According to the schematic, this regulator is used both for USB30 and
>>> USB20, so give it a more appropriate name.
>> 
>> I don't have the schematics, so I'll need you to answer this, but what
>> is the regulator called _in_ the schematics?
> 
> There are two regulators called VCC50_USB_HOST1 and VCC50_USB_HOST2,
> and they are both controlled by GPIO1_D5
> They both for two usb 2.0 hosts,  not usb 30, the schematics make
> me a bit confused.

In that case, I'd say that renaming the regulator to vcc5v0_usb_host is
fine, but there should also be a comment in the board dts file that it's
actually two separate regulators.

>> I.e. we want regulators to really be named the same as in the 
>> schematic
>> so people can look up thing from the dts in the schematics and the 
>> other
>> way around too.

Ah, that's very helpful.

>>> Fixes: 791c154c3982 ("arm64: dts: rockchip: Add support for rk3588 
>>> based board Cool Pi CM5 EVB")
>>> Signed-off-by: Andy Yan <andyshrk at 163.com>
>>> ---
>>> 
>>>  arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts | 6 +++---
>>>  1 file changed, 3 insertions(+), 3 deletions(-)
>>> 
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts 
>>> b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
>>> index 1b5681fe0471..5f42f1065d73 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
>>> @@ -84,7 +84,7 @@ vcc3v3_lcd: vcc3v3-lcd-regulator {
>>>  		vin-supply = <&vcc3v3_sys>;
>>>  	};
>>> 
>>> -	vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
>>> +	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
>>>  		compatible = "regulator-fixed";
>>>  		regulator-name = "vcc5v0_host";
>>>  		regulator-boot-on;
>>> @@ -200,12 +200,12 @@ &u2phy3 {
>>>  };
>>> 
>>>  &u2phy2_host {
>>> -	phy-supply = <&vcc5v0_usb30_host>;
>>> +	phy-supply = <&vcc5v0_usb_host>;
>>>  	status = "okay";
>>>  };
>>> 
>>>  &u2phy3_host {
>>> -	phy-supply = <&vcc5v0_usb30_host>;
>>> +	phy-supply = <&vcc5v0_usb_host>;
>>>  	status = "okay";
>>>  };