[PATCH v2 13/15] arm64: dts: renesas: Add Renesas R8A779H0 SoC support

[Niklas Söderlund]

Hi Geert,

Thanks for your work.

On 2024-01-25 16:34:41 +0100, Geert Uytterhoeven wrote:
> From: Hai Pham <hai.pham.ud at renesas.com>
> 
> Add initial support for the Renesas R-Car V4M (R8A779H0) SoC.
> 
> Signed-off-by: Hai Pham <hai.pham.ud at renesas.com>
> Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>

> ---
> v2:
>   - Add vendor-prefixes to DT binding definition header files.
> 
> Changes compared to the BSP:
>   - Add "-clk" suffix to clock node names,
>   - Rename "pmu_a76" node to "pmu-a76",
>   - Drop bogus CPU masks from GICv3 PPI interrupt specifiers,
>   - Drop hscif0 dmas and dma-names placeholder,
>   - Add missing hypervisor virtual timer IRQ to timer node.
> ---
>  arch/arm64/boot/dts/renesas/r8a779h0.dtsi | 121 ++++++++++++++++++++++
>  1 file changed, 121 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/renesas/r8a779h0.dtsi
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a779h0.dtsi b/arch/arm64/boot/dts/renesas/r8a779h0.dtsi
> new file mode 100644
> index 0000000000000000..a082e2d06b696019
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r8a779h0.dtsi
> @@ -0,0 +1,121 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +/*
> + * Device Tree Source for the R-Car V4M (R8A779H0) SoC
> + *
> + * Copyright (C) 2023 Renesas Electronics Corp.
> + */
> +
> +#include <dt-bindings/clock/renesas,r8a779h0-cpg-mssr.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/power/renesas,r8a779h0-sysc.h>
> +
> +/ {
> +	compatible = "renesas,r8a779h0";
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		a76_0: cpu at 0 {
> +			compatible = "arm,cortex-a76";
> +			reg = <0>;
> +			device_type = "cpu";
> +			power-domains = <&sysc R8A779H0_PD_A1E0D0C0>;
> +		};
> +	};
> +
> +	extal_clk: extal-clk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		/* This value must be overridden by the board */
> +		clock-frequency = <0>;
> +	};
> +
> +	extalr_clk: extalr-clk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		/* This value must be overridden by the board */
> +		clock-frequency = <0>;
> +	};
> +
> +	pmu-a76 {
> +		compatible = "arm,cortex-a76-pmu";
> +		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
> +	};
> +
> +	/* External SCIF clock - to be overridden by boards that provide it */
> +	scif_clk: scif-clk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <0>;
> +	};
> +
> +	soc: soc {
> +		compatible = "simple-bus";
> +		interrupt-parent = <&gic>;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		cpg: clock-controller at e6150000 {
> +			compatible = "renesas,r8a779h0-cpg-mssr";
> +			reg = <0 0xe6150000 0 0x4000>;
> +			clocks = <&extal_clk>, <&extalr_clk>;
> +			clock-names = "extal", "extalr";
> +			#clock-cells = <2>;
> +			#power-domain-cells = <0>;
> +			#reset-cells = <1>;
> +		};
> +
> +		rst: reset-controller at e6160000 {
> +			compatible = "renesas,r8a779h0-rst";
> +			reg = <0 0xe6160000 0 0x4000>;
> +		};
> +
> +		sysc: system-controller at e6180000 {
> +			compatible = "renesas,r8a779h0-sysc";
> +			reg = <0 0xe6180000 0 0x4000>;
> +			#power-domain-cells = <1>;
> +		};
> +
> +		hscif0: serial at e6540000 {
> +			compatible = "renesas,hscif-r8a779h0",
> +				     "renesas,rcar-gen4-hscif", "renesas,hscif";
> +			reg = <0 0xe6540000 0 0x60>;
> +			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 514>,
> +				 <&cpg CPG_CORE R8A779H0_CLK_SASYNCPERD1>,
> +				 <&scif_clk>;
> +			clock-names = "fck", "brg_int", "scif_clk";
> +			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
> +			resets = <&cpg 514>;
> +			status = "disabled";
> +		};
> +
> +		gic: interrupt-controller at f1000000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <3>;
> +			#address-cells = <0>;
> +			interrupt-controller;
> +			reg = <0x0 0xf1000000 0 0x20000>,
> +			      <0x0 0xf1060000 0 0x110000>;
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +
> +		prr: chipid at fff00044 {
> +			compatible = "renesas,prr";
> +			reg = <0 0xfff00044 0 4>;
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> +				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> +				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> +				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
> +				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
> +	};
> +};
> -- 
> 2.34.1
> 
> 

-- 
Kind Regards,
Niklas Söderlund