[PATCH 1/3] arm64: dts: qcom: sm8650-qrd: add Audio nodes

Neil Armstrong neil.armstrong at linaro.org
Thu Jan 25 08:42:41 PST 2024


Add the remaining Audio nodes on the SM8650-QRD board including:
- Qualcomm Aqstic WCD9395 audio codec on the RX & TX Soundwire interfaces
- WSA8845 Left & Right Speakers
- Link the WCD9395 Codec node to the WCD9395 USB SubSystem node to handle
  the USB-C Audio Accessory Mode events & lane swapping
- Sound card with routing for Speakers and Microphones

Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8650-qrd.dts | 203 ++++++++++++++++++++++++++++++++
 1 file changed, 203 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
index 8515498553bf..277b1ba81685 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
@@ -92,6 +92,72 @@ pmic_glink_sbu: endpoint {
 		};
 	};
 
+	sound {
+		compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8650-QRD";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC1", "MIC BIAS1",
+				"AMIC2", "MIC BIAS2",
+				"AMIC3", "MIC BIAS3",
+				"AMIC4", "MIC BIAS3",
+				"AMIC5", "MIC BIAS4",
+				"TX SWR_INPUT0", "ADC1_OUTPUT",
+				"TX SWR_INPUT1", "ADC2_OUTPUT",
+				"TX SWR_INPUT2", "ADC3_OUTPUT",
+				"TX SWR_INPUT3", "ADC4_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 
@@ -102,6 +168,41 @@ vph_pwr: vph-pwr-regulator {
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	wcd939x: audio-codec {
+		compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			wcd_codec_headset_in: endpoint {
+				remote-endpoint = <&wcd_usbss_headset_out>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -478,6 +579,14 @@ wcd_usbss_sbu_mux: endpoint {
 					remote-endpoint = <&pmic_glink_sbu>;
 				};
 			};
+
+			port at 1 {
+				reg = <1>;
+
+				wcd_usbss_headset_out: endpoint {
+					remote-endpoint = <&wcd_codec_headset_in>;
+				};
+			};
 		};
        };
 };
@@ -525,6 +634,16 @@ &ipa {
 	status = "okay";
 };
 
+&lpass_tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
 &mdss {
 	status = "okay";
 };
@@ -743,6 +862,74 @@ touchscreen at 0 {
 	};
 };
 
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Speaker Left */
+	left_spkr: speaker at 0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+	};
+
+	/* WSA8845, Speaker Right */
+	right_spkr: speaker at 0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9395 RX */
+	wcd_rx: codec at 0,4 {
+		compatible = "sdw20217010e00";
+		reg = <0 4>;
+
+		/*
+		 * WCD9395 RX Port 1 (HPH_L/R)      <=> SWR1 Port 1 (HPH_L/R)
+		 * WCD9395 RX Port 2 (CLSH)         <=> SWR1 Port 2 (CLSH)
+		 * WCD9395 RX Port 3 (COMP_L/R)     <=> SWR1 Port 3 (COMP_L/R)
+		 * WCD9395 RX Port 4 (LO)           <=> SWR1 Port 4 (LO)
+		 * WCD9395 RX Port 5 (DSD_L/R)      <=> SWR1 Port 5 (DSD_L/R)
+		 * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
+		 */
+		qcom,rx-port-mapping = <1 2 3 4 5 9>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9395 TX */
+	wcd_tx: codec at 0,3 {
+		compatible = "sdw20217010e00";
+		reg = <0 3>;
+
+		/*
+		 * WCD9395 TX Port 1 (ADC1,2,3,4)         <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1)   <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
+		 * WCD9395 TX Port 4 (DMIC4,5,6,7)        <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
+		 */
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
 &tlmm {
 	/* Reserved I/Os for NFC */
 	gpio-reserved-ranges = <32 8>, <74 1>;
@@ -790,6 +977,14 @@ mdp_vsync_suspend: mdp-vsync-suspend-state {
 		bias-pull-down;
 	};
 
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
 	ts_irq: ts-irq-state {
 		pins = "gpio161";
 		function = "gpio";
@@ -804,6 +999,14 @@ ts_reset: ts-reset-state {
 		drive-strength = <8>;
 		bias-pull-up;
 	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
 };
 
 &uart14 {

-- 
2.34.1




More information about the linux-arm-kernel mailing list