[PATCH v4 2/4] mailbox: imx: support return value of init

[Peng Fan]

> Subject: Re: [PATCH v4 2/4] mailbox: imx: support return value of init
>
> Hi Peng,
>
> Am Donnerstag, 25. Januar 2024, 06:20:04 CET schrieb Peng Fan (OSS):
> > From: Peng Fan <peng.fan at nxp.com>
> >
> > There will be changes that init may fail, so adding return value for
> > init function.
> >
> > Signed-off-by: Peng Fan <peng.fan at nxp.com>
> > ---
> >  drivers/mailbox/imx-mailbox.c | 35
> > ++++++++++++++++++++++++-----------
> >  1 file changed, 24 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/mailbox/imx-mailbox.c
> > b/drivers/mailbox/imx-mailbox.c index 656171362fe9..dced4614065f
> > 100644
> > --- a/drivers/mailbox/imx-mailbox.c
> > +++ b/drivers/mailbox/imx-mailbox.c
> > @@ -110,7 +110,7 @@ struct imx_mu_dcfg {
> >     int (*tx)(struct imx_mu_priv *priv, struct imx_mu_con_priv *cp, void
> > *data); int (*rx)(struct imx_mu_priv *priv, struct imx_mu_con_priv *cp);
> > int (*rxdb)(struct imx_mu_priv *priv, struct imx_mu_con_priv *cp); -
>       void
> > (*init)(struct imx_mu_priv *priv);
> > +   int (*init)(struct imx_mu_priv *priv);
> >     enum imx_mu_type type;
> >     u32     xTR;            /* Transmit Register0 */
> >     u32     xRR;            /* Receive Register0 */
> > @@ -737,7 +737,7 @@ static struct mbox_chan
> *imx_mu_seco_xlate(struct
> > mbox_controller *mbox, return imx_mu_xlate(mbox, sp);  }
> >
> > -static void imx_mu_init_generic(struct imx_mu_priv *priv)
> > +static int imx_mu_init_generic(struct imx_mu_priv *priv)
> >  {
> >     unsigned int i;
> >     unsigned int val;
> > @@ -757,7 +757,7 @@ static void imx_mu_init_generic(struct
> imx_mu_priv
> > *priv) priv->mbox.of_xlate = imx_mu_xlate;
> >
> >     if (priv->side_b)
> > -           return;
> > +           return 0;
> >
> >     /* Set default MU configuration */
> >     for (i = 0; i < IMX_MU_xCR_MAX; i++) @@ -770,9 +770,11 @@ static
> > void imx_mu_init_generic(struct imx_mu_priv
> > *priv) /* Clear any pending RSR */
> >     for (i = 0; i < IMX_MU_NUM_RR; i++)
> >             imx_mu_read(priv, priv->dcfg->xRR + (i % 4) * 4);
> > +
> > +   return 0;
> >  }
> >
> > -static void imx_mu_init_specific(struct imx_mu_priv *priv)
> > +static int imx_mu_init_specific(struct imx_mu_priv *priv)
> >  {
> >     unsigned int i;
> >     int num_chans = priv->dcfg->type & IMX_MU_V2_S4 ?
> IMX_MU_S4_CHANS :
> > IMX_MU_SCU_CHANS; @@ -794,12 +796,20 @@ static void
> > imx_mu_init_specific(struct imx_mu_priv *priv) /* Set default MU
> > configuration */
> >     for (i = 0; i < IMX_MU_xCR_MAX; i++)
> >             imx_mu_write(priv, 0, priv->dcfg->xCR[i]);
> > +
> > +   return 0;
> >  }
> >
> > -static void imx_mu_init_seco(struct imx_mu_priv *priv)
> > +static int imx_mu_init_seco(struct imx_mu_priv *priv)
> >  {
> > -   imx_mu_init_generic(priv);
> > +   int ret;
> > +
> > +   ret = imx_mu_init_generic(priv);
> > +   if (ret)
> > +           return ret;
> >     priv->mbox.of_xlate = imx_mu_seco_xlate;
> > +
> > +   return 0;
> >  }
> >
> >  static int imx_mu_probe(struct platform_device *pdev) @@ -866,7
> > +876,11 @@ static int imx_mu_probe(struct platform_device *pdev)
> >
> >     priv->side_b = of_property_read_bool(np, "fsl,mu-side-b");
> >
> > -   priv->dcfg->init(priv);
> > +   ret = priv->dcfg->init(priv);
> > +   if (ret) {
> > +           dev_err(dev, "Failed to init MU\n");
>
> As this is during probe, I rather use dev_err_probe right away. Even if dcfg-
> >init won't return -EPROBE_DEFER for now.

Let's defer this action until init could return -EPROBE_DEFER.

Thanks,
Peng.

>
> Best regards,
> Alexander
>
> > +           goto disable_clk;
> > +   }
> >
> >     spin_lock_init(&priv->xcr_lock);
> >
> > @@ -878,10 +892,8 @@ static int imx_mu_probe(struct platform_device
> *pdev)
> >     platform_set_drvdata(pdev, priv);
> >
> >     ret = devm_mbox_controller_register(dev, &priv->mbox);
> > -   if (ret) {
> > -           clk_disable_unprepare(priv->clk);
> > -           return ret;
> > -   }
> > +   if (ret)
> > +           goto disable_clk;
> >
> >     pm_runtime_enable(dev);
> >
> > @@ -899,6 +911,7 @@ static int imx_mu_probe(struct platform_device
> > *pdev)
> >
> >  disable_runtime_pm:
> >     pm_runtime_disable(dev);
> > +disable_clk:
> >     clk_disable_unprepare(priv->clk);
> >     return ret;
> >  }
>
>
> --
> TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
> Amtsgericht München, HRB 105018
> Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
> http://www.t/
> q-
> group.com%2F&data=05%7C02%7Cpeng.fan%40nxp.com%7C77ae5cd17000
> 42c9a4f008dc1d85b1ba%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7
> C0%7C638417707259707963%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4
> wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7
> C%7C%7C&sdata=OuTmDvQM0MYTBv%2BhwtQNPgd%2BuA9cMKoBIHe%2Fi
> Zl9Iu4%3D&reserved=0
>