[PATCH 4/4] arm64: dts: rockchip: Add OPP data for CPU cores on RK3588
Daniel Lezcano
daniel.lezcano at linaro.org
Thu Jan 25 01:30:20 PST 2024
Hi Alexey,
Adding Viresh
On 24/01/2024 21:30, Alexey Charkov wrote:
> By default the CPUs on RK3588 start up in a conservative performance
> mode. Add frequency and voltage mappings to the device tree to enable
> dynamic scaling via cpufreq
>
> Signed-off-by: Alexey Charkov <alchark at gmail.com>
> ---
> arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 209 ++++++++++++++++++++++++++++++
> 1 file changed, 209 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> index 131b9eb21398..e605be531a0f 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> @@ -97,6 +97,7 @@ cpu_l0: cpu at 0 {
> clocks = <&scmi_clk SCMI_CLK_CPUL>;
> assigned-clocks = <&scmi_clk SCMI_CLK_CPUL>;
> assigned-clock-rates = <816000000>;
> + operating-points-v2 = <&cluster0_opp_table>;
> cpu-idle-states = <&CPU_SLEEP>;
> i-cache-size = <32768>;
> i-cache-line-size = <64>;
> @@ -116,6 +117,7 @@ cpu_l1: cpu at 100 {
> enable-method = "psci";
> capacity-dmips-mhz = <530>;
> clocks = <&scmi_clk SCMI_CLK_CPUL>;
> + operating-points-v2 = <&cluster0_opp_table>;
> cpu-idle-states = <&CPU_SLEEP>;
> i-cache-size = <32768>;
> i-cache-line-size = <64>;
> @@ -135,6 +137,7 @@ cpu_l2: cpu at 200 {
> enable-method = "psci";
> capacity-dmips-mhz = <530>;
> clocks = <&scmi_clk SCMI_CLK_CPUL>;
> + operating-points-v2 = <&cluster0_opp_table>;
> cpu-idle-states = <&CPU_SLEEP>;
> i-cache-size = <32768>;
> i-cache-line-size = <64>;
> @@ -154,6 +157,7 @@ cpu_l3: cpu at 300 {
> enable-method = "psci";
> capacity-dmips-mhz = <530>;
> clocks = <&scmi_clk SCMI_CLK_CPUL>;
> + operating-points-v2 = <&cluster0_opp_table>;
> cpu-idle-states = <&CPU_SLEEP>;
> i-cache-size = <32768>;
> i-cache-line-size = <64>;
> @@ -175,6 +179,7 @@ cpu_b0: cpu at 400 {
> clocks = <&scmi_clk SCMI_CLK_CPUB01>;
> assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>;
> assigned-clock-rates = <816000000>;
> + operating-points-v2 = <&cluster1_opp_table>;
> cpu-idle-states = <&CPU_SLEEP>;
> i-cache-size = <65536>;
> i-cache-line-size = <64>;
> @@ -194,6 +199,7 @@ cpu_b1: cpu at 500 {
> enable-method = "psci";
> capacity-dmips-mhz = <1024>;
> clocks = <&scmi_clk SCMI_CLK_CPUB01>;
> + operating-points-v2 = <&cluster1_opp_table>;
> cpu-idle-states = <&CPU_SLEEP>;
> i-cache-size = <65536>;
> i-cache-line-size = <64>;
> @@ -215,6 +221,7 @@ cpu_b2: cpu at 600 {
> clocks = <&scmi_clk SCMI_CLK_CPUB23>;
> assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>;
> assigned-clock-rates = <816000000>;
> + operating-points-v2 = <&cluster2_opp_table>;
> cpu-idle-states = <&CPU_SLEEP>;
> i-cache-size = <65536>;
> i-cache-line-size = <64>;
> @@ -234,6 +241,7 @@ cpu_b3: cpu at 700 {
> enable-method = "psci";
> capacity-dmips-mhz = <1024>;
> clocks = <&scmi_clk SCMI_CLK_CPUB23>;
> + operating-points-v2 = <&cluster2_opp_table>;
> cpu-idle-states = <&CPU_SLEEP>;
> i-cache-size = <65536>;
> i-cache-line-size = <64>;
> @@ -348,6 +356,207 @@ l3_cache: l3-cache {
> };
> };
>
> + cluster0_opp_table: opp-table-cluster0 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-408000000 {
> + opp-hz = /bits/ 64 <408000000>;
> + opp-microvolt = <675000 675000 950000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-600000000 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <675000 675000 950000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-816000000 {
> + opp-hz = /bits/ 64 <816000000>;
> + opp-microvolt = <675000 675000 950000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-1008000000 {
> + opp-hz = /bits/ 64 <1008000000>;
> + opp-microvolt = <675000 675000 950000>;
> + clock-latency-ns = <40000>;
> + };
It is not useful to introduce OPP with the same voltage. There is no
gain in terms of energy efficiency as the compute capacity is linearly
tied with power consumption (P=CxFxV²) in this case.
For example, opp-408 consumes 2 bogoWatts and opp-816 consumes 4
bogoWatts (because of the same voltage).
For a workload, opp-408 takes 10 sec and opp-816 takes 5 sec because it
is twice faster.
The energy consumption is:
opp-408 = 10 x 2 = 20 BogoJoules
opp-816 = 5 x 4 = 20 BogoJoules
> + opp-1200000000 {
> + opp-hz = /bits/ 64 <1200000000>;
> + opp-microvolt = <712500 712500 950000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-1416000000 {
> + opp-hz = /bits/ 64 <1416000000>;
> + opp-microvolt = <762500 762500 950000>;
> + clock-latency-ns = <40000>;
> + opp-suspend;
> + };
> + opp-1608000000 {
> + opp-hz = /bits/ 64 <1608000000>;
> + opp-microvolt = <850000 850000 950000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-1800000000 {
> + opp-hz = /bits/ 64 <1800000000>;
> + opp-microvolt = <950000 950000 950000>;
> + clock-latency-ns = <40000>;
> + };
> + };
> +
> + cluster1_opp_table: opp-table-cluster1 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-408000000 {
> + opp-hz = /bits/ 64 <408000000>;
> + opp-microvolt = <675000 675000 1000000>;
> + clock-latency-ns = <40000>;
> + opp-suspend;
> + };
> + opp-600000000 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <675000 675000 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-816000000 {
> + opp-hz = /bits/ 64 <816000000>;
> + opp-microvolt = <675000 675000 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-1008000000 {
> + opp-hz = /bits/ 64 <1008000000>;
> + opp-microvolt = <675000 675000 1000000>;
> + clock-latency-ns = <40000>;
> + };
same comment
> + opp-1200000000 {
> + opp-hz = /bits/ 64 <1200000000>;
> + opp-microvolt = <675000 675000 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-1416000000 {
> + opp-hz = /bits/ 64 <1416000000>;
> + opp-microvolt = <725000 725000 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-1608000000 {
> + opp-hz = /bits/ 64 <1608000000>;
> + opp-microvolt = <762500 762500 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-1800000000 {
> + opp-hz = /bits/ 64 <1800000000>;
> + opp-microvolt = <850000 850000 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-2016000000 {
> + opp-hz = /bits/ 64 <2016000000>;
> + opp-microvolt = <925000 925000 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-2208000000 {
> + opp-hz = /bits/ 64 <2208000000>;
> + opp-microvolt = <987500 987500 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-2256000000 {
> + opp-hz = /bits/ 64 <2256000000>;
> + opp-microvolt = <1000000 1000000 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-2304000000 {
> + opp-hz = /bits/ 64 <2304000000>;
> + opp-microvolt = <1000000 1000000 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-2352000000 {
> + opp-hz = /bits/ 64 <2352000000>;
> + opp-microvolt = <1000000 1000000 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-2400000000 {
> + opp-hz = /bits/ 64 <2400000000>;
> + opp-microvolt = <1000000 1000000 1000000>;
> + clock-latency-ns = <40000>;
> + };
Same comment
> + };
> +
> + cluster2_opp_table: opp-table-cluster2 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-408000000 {
> + opp-hz = /bits/ 64 <408000000>;
> + opp-microvolt = <675000 675000 1000000>;
> + clock-latency-ns = <40000>;
> + opp-suspend;
> + };
> + opp-600000000 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <675000 675000 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-816000000 {
> + opp-hz = /bits/ 64 <816000000>;
> + opp-microvolt = <675000 675000 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-1008000000 {
> + opp-hz = /bits/ 64 <1008000000>;
> + opp-microvolt = <675000 675000 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-1200000000 {
> + opp-hz = /bits/ 64 <1200000000>;
> + opp-microvolt = <675000 675000 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-1416000000 {
> + opp-hz = /bits/ 64 <1416000000>;
> + opp-microvolt = <725000 725000 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-1608000000 {
> + opp-hz = /bits/ 64 <1608000000>;
> + opp-microvolt = <762500 762500 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-1800000000 {
> + opp-hz = /bits/ 64 <1800000000>;
> + opp-microvolt = <850000 850000 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-2016000000 {
> + opp-hz = /bits/ 64 <2016000000>;
> + opp-microvolt = <925000 925000 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-2208000000 {
> + opp-hz = /bits/ 64 <2208000000>;
> + opp-microvolt = <987500 987500 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-2256000000 {
> + opp-hz = /bits/ 64 <2256000000>;
> + opp-microvolt = <1000000 1000000 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-2304000000 {
> + opp-hz = /bits/ 64 <2304000000>;
> + opp-microvolt = <1000000 1000000 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-2352000000 {
> + opp-hz = /bits/ 64 <2352000000>;
> + opp-microvolt = <1000000 1000000 1000000>;
> + clock-latency-ns = <40000>;
> + };
> + opp-2400000000 {
> + opp-hz = /bits/ 64 <2400000000>;
> + opp-microvolt = <1000000 1000000 1000000>;
> + clock-latency-ns = <40000>;
> + };
Same comment
> + };
> +
> firmware {
> optee: optee {
> compatible = "linaro,optee-tz";
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
More information about the linux-arm-kernel
mailing list