[PATCH v9 5/5] ARM: dts: add stm32f769-disco-mb1166-reva09

[Alexandre TORGUE]

Hi Dario

On 1/24/24 12:33, Dario Binacchi wrote:
> As reported in the section 8.3 (i. e. Board revision history) of document
> UM2033 (i. e. Discovery kit with STM32F769NI MCU) these are the changes
> related to the board revision addressed by the patch:
> - Board MB1166 revision A-09:
>    - LCD FRIDA FRD397B25009-D-CTK replaced by FRIDA FRD400B25025-A-CTK
> 
> The patch adds the DTS support for the new display which belongs to the
> the Novatek NT35510-based panel family.
> 
> Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
> Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
> Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou at foss.st.com>
> 

I still have the following yaml error:

arch/arm/boot/dts/st/stm32f769-disco-mb1166-reva09.dtb: panel at 0: 'port' 
does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: 
http://devicetree.org/schemas/display/panel/novatek,nt35510.yaml#

It seems that "port" property is missing in "novatek,nt35510.yaml" file, 
can you update it ? Or delete it in the dts file if not needed.

With this change I'll take your series.

I also saw that stm32f769-disco has a similar problem with 
orisetech,otm8009a.yaml file, "backlight" property is not defined.

thanks in advance
Alex

> ---
> 
> Changes in v9:
> - Change commit message
> - Rename stm32f769-disco-mb1225-revb03-mb1166-reva09 to
>    stm32f769-disco-mb1166-reva09
> 
> Changes in v8:
> - Add Reviewed-by tag of Linus Walleij
> - Add Reviewed-by tag of Raphael Gallais-Pou
> 
> Changes in v7:
> - Replace .dts with .dtb in the Makefile
> 
> Changes in v6:
> - Drop patches
>    - [5/8] dt-bindings: nt35510: add compatible for FRIDA FRD400B25025-A-CTK
>    - [7/8] drm/panel: nt35510: move hardwired parameters to configuration
>    - [8/8] drm/panel: nt35510: support FRIDA FRD400B25025-A-CTK
>    because applied by the maintainer Linus Walleij
> 
> Changes in v5:
> - Replace GPIOD_ASIS with GPIOD_OUT_HIGH in the call to devm_gpiod_get_optional().
> 
> Changes in v2:
> - Change the status of panel_backlight node to "disabled"
> - Delete backlight property from panel0 node.
> - Re-write the patch [8/8] "drm/panel: nt35510: support FRIDA FRD400B25025-A-CTK"
>    in the same style as the original driver.
> 
>   arch/arm/boot/dts/st/Makefile                  |  1 +
>   .../dts/st/stm32f769-disco-mb1166-reva09.dts   | 18 ++++++++++++++++++
>   2 files changed, 19 insertions(+)
>   create mode 100644 arch/arm/boot/dts/st/stm32f769-disco-mb1166-reva09.dts
> 
> diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile
> index 7892ad69b441..9fedd6776208 100644
> --- a/arch/arm/boot/dts/st/Makefile
> +++ b/arch/arm/boot/dts/st/Makefile
> @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
>   	stm32f469-disco.dtb \
>   	stm32f746-disco.dtb \
>   	stm32f769-disco.dtb \
> +	stm32f769-disco-mb1166-reva09.dtb \
>   	stm32429i-eval.dtb \
>   	stm32746g-eval.dtb \
>   	stm32h743i-eval.dtb \
> diff --git a/arch/arm/boot/dts/st/stm32f769-disco-mb1166-reva09.dts b/arch/arm/boot/dts/st/stm32f769-disco-mb1166-reva09.dts
> new file mode 100644
> index 000000000000..014cac192375
> --- /dev/null
> +++ b/arch/arm/boot/dts/st/stm32f769-disco-mb1166-reva09.dts
> @@ -0,0 +1,18 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2023 Dario Binacchi <dario.binacchi at amarulasolutions.com>
> + */
> +
> +#include "stm32f769-disco.dts"
> +
> +&panel_backlight {
> +	status = "disabled";
> +};
> +
> +&panel0 {
> +	compatible = "frida,frd400b25025", "novatek,nt35510";
> +	vddi-supply = <&vcc_3v3>;
> +	vdd-supply = <&vcc_3v3>;
> +	/delete-property/backlight;
> +	/delete-property/power-supply;
> +};