[PATCH 08/11] arm64: dts: ti: k3-j721s2: Convert serdes_ln_ctrl node into reg-mux

[Andrew Davis]

This removes a dependency on the parent node being a syscon node.
Convert from mmio-mux to reg-mux adjusting node name and properties
as needed.

Signed-off-by: Andrew Davis <afd at ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index d985250d7caf4..2abfc35abeb87 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -58,11 +58,11 @@ phy_gmii_sel_cpsw: phy at 34 {
 		};
 
 		serdes_ln_ctrl: mux-controller at 80 {
-			compatible = "mmio-mux";
+			compatible = "reg-mux";
 			reg = <0x80 0x10>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x80 0x3>, <0x84 0x3>, /* SERDES0 lane0/1 select */
-					<0x88 0x3>, <0x8c 0x3>; /* SERDES0 lane2/3 select */
+			mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */
+					<0x8 0x3>, <0xc 0x3>; /* SERDES0 lane2/3 select */
 		};
 
 		ehrpwm_tbclk: clock-controller at 140 {
-- 
2.39.2