[PATCH 06/11] arm64: dts: ti: k3-j721e: Convert usb_serdes_mux node into reg-mux

[Andrew Davis]

This removes a dependency on the parent node being a syscon node.
Convert from mmio-mux to reg-mux adjusting node name and properties
as needed.

Signed-off-by: Andrew Davis <afd at ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index c168bfbd303da..db3855ae798a2 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -70,10 +70,11 @@ cpsw0_phy_gmii_sel: phy at 4044 {
 		};
 
 		usb_serdes_mux: mux-controller at 4000 {
-			compatible = "mmio-mux";
+			compatible = "reg-mux";
+			reg = <0x4000 0x20>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4000 0x8000000>, /* USB0 to SERDES0/3 mux */
-					<0x4010 0x8000000>; /* USB1 to SERDES1/2 mux */
+			mux-reg-masks = <0x0 0x8000000>, /* USB0 to SERDES0/3 mux */
+					<0x10 0x8000000>; /* USB1 to SERDES1/2 mux */
 		};
 
 		ehrpwm_tbclk: clock-controller at 4140 {
-- 
2.39.2