[PATCH net v3] net: stmmac: Wait a bit for the reset to take effect

[Serge Semin]

On Mon, Jan 22, 2024 at 07:19:09PM +0100, Bernd Edlinger wrote:
> otherwise the synopsys_id value may be read out wrong,
> because the GMAC_VERSION register might still be in reset
> state, for at least 1 us after the reset is de-asserted.
> 
> Add a wait for 10 us before continuing to be on the safe side.
> 
> > From what have you got that delay value?
> 
> Just try and error, with very old linux versions and old gcc versions
> the synopsys_id was read out correctly most of the time (but not always),
> with recent linux versions and recnet gcc versions it was read out
> wrongly most of the time, but again not always.
> I don't have access to the VHDL code in question, so I cannot
> tell why it takes so long to get the correct values, I also do not
> have more than a few hardware samples, so I cannot tell how long
> this timeout must be in worst case.
> Experimentally I can tell that the register is read several times
> as zero immediately after the reset is de-asserted, also adding several
> no-ops is not enough, adding a printk is enough, also udelay(1) seems to
> be enough but I tried that not very often, and I have not access to many
> hardware samples to be 100% sure about the necessary delay.
> And since the udelay here is only executed once per device instance,
> it seems acceptable to delay the boot for 10 us.
> 
> BTW: my hardware's synopsys id is 0x37.
> 
> Fixes: c5e4ddbdfa11 ("net: stmmac: Add support for optional reset control")
> Signed-off-by: Bernd Edlinger <bernd.edlinger at hotmail.de>
> Reviewed-by: Jiri Pirko <jiri at nvidia.com>

Thanks for taking all the notes into account. No objections from my
side:

Reviewed-by: Serge Semin <fancer.lancer at gmail.com>

-Serge(y)

> ---
>  drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> v2: rebased to v6.7, retested and updated the commit message
> as suggested Serge Semins review comment:
> https://lore.kernel.org/lkml/b4mpa62b2juln47374x6xxnbozb7fcfgztrc5ounk4tvscs3wg@mixnvsoqno7j/
> and retained Jiri Pirkos Reviwed-by from:
> https://lore.kernel.org/lkml/ZT+Zq4j9iQj1+Xai@nanopsycho/
> 
> v3: addressed review comments.
> 
> 
> Thanks
> Bernd.
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index a0e46369ae15..b334eb16da23 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -7542,6 +7542,9 @@ int stmmac_dvr_probe(struct device *device,
>  		dev_err(priv->device, "unable to bring out of ahb reset: %pe\n",
>  			ERR_PTR(ret));
>  
> +	/* Wait a bit for the reset to take effect */
> +	udelay(10);
> +
>  	/* Init MAC and get the capabilities */
>  	ret = stmmac_hw_init(priv);
>  	if (ret)
> -- 
> 2.39.2