[PATCH RFC v3 05/21] ACPI: Rename ACPI_HOTPLUG_CPU to include 'present'
Rafael J. Wysocki
rafael at kernel.org
Tue Jan 23 11:27:05 PST 2024
On Tue, Jan 23, 2024 at 7:59 PM Russell King (Oracle)
<linux at armlinux.org.uk> wrote:
>
> On Tue, Jan 23, 2024 at 07:26:57PM +0100, Rafael J. Wysocki wrote:
> > On Tue, Jan 23, 2024 at 7:20 PM Russell King (Oracle)
> > <linux at armlinux.org.uk> wrote:
> > >
> > > On Tue, Jan 23, 2024 at 06:43:59PM +0100, Rafael J. Wysocki wrote:
> > > > On Tue, Jan 23, 2024 at 5:36 PM Russell King (Oracle)
> > > > <linux at armlinux.org.uk> wrote:
> > > > >
> > > > > On Tue, Jan 23, 2024 at 05:15:54PM +0100, Rafael J. Wysocki wrote:
> > > > > > On Tue, Jan 23, 2024 at 2:28 PM Russell King (Oracle)
> > > > > > <linux at armlinux.org.uk> wrote:
> > > > > > >
> > > > > > > On Mon, Jan 22, 2024 at 06:00:13PM +0000, Jonathan Cameron wrote:
> > > > > > > > On Mon, 18 Dec 2023 21:35:16 +0100
> > > > > > > > "Rafael J. Wysocki" <rafael at kernel.org> wrote:
> > > > > > > >
> > > > > > > > > On Wed, Dec 13, 2023 at 1:49 PM Russell King <rmk+kernel at armlinux.org.uk> wrote:
> > > > > > > > > >
> > > > > > > > > > From: James Morse <james.morse at arm.com>
> > > > > > > > > >
> > > > > > > > > > The code behind ACPI_HOTPLUG_CPU allows a not-present CPU to become
> > > > > > > > > > present.
> > > > > > > > >
> > > > > > > > > Right.
> > > > > > > > >
> > > > > > > > > > This isn't the only use of HOTPLUG_CPU. On arm64 and riscv
> > > > > > > > > > CPUs can be taken offline as a power saving measure.
> > > > > > > > >
> > > > > > > > > But still there is the case in which a non-present CPU can become
> > > > > > > > > present, isn't it there?
> > > > > > > >
> > > > > > > > Not yet defined by the architectures (and I'm assuming it probably never will be).
> > > > > > > >
> > > > > > > > The original proposal we took to ARM was to do exactly that - they pushed
> > > > > > > > back hard on the basis there was no architecturally safe way to implement it.
> > > > > > > > Too much of the ARM arch has to exist from the start of time.
> > > > > > > >
> > > > > > > > https://lore.kernel.org/linux-arm-kernel/cbaa6d68-6143-e010-5f3c-ec62f879ad95@arm.com/
> > > > > > > > is one of the relevant threads of the kernel side of that discussion.
> > > > > > > >
> > > > > > > > Not to put specific words into the ARM architects mouths, but the
> > > > > > > > short description is that there is currently no demand for working
> > > > > > > > out how to make physical CPU hotplug possible, as such they will not
> > > > > > > > provide an architecturally compliant way to do it for virtual CPU hotplug and
> > > > > > > > another means is needed (which is why this series doesn't use the present bit
> > > > > > > > for that purpose and we have the Online capable bit in MADT/GICC)
> > > > > > > >
> > > > > > > > It was a 'fun' dance of several years to get to that clarification.
> > > > > > > > As another fun fact, the same is defined for x86, but I don't think
> > > > > > > > anyone has used it yet (GICC for ARM has an online capable bit in the flags to
> > > > > > > > enable this, which was remarkably similar to the online capable bit in the
> > > > > > > > flags of the Local APIC entries as added fairly recently).
> > > > > > > >
> > > > > > > > >
> > > > > > > > > > On arm64 an offline CPU may be disabled by firmware, preventing it from
> > > > > > > > > > being brought back online, but it remains present throughout.
> > > > > > > > > >
> > > > > > > > > > Adding code to prevent user-space trying to online these disabled CPUs
> > > > > > > > > > needs some additional terminology.
> > > > > > > > > >
> > > > > > > > > > Rename the Kconfig symbol CONFIG_ACPI_HOTPLUG_PRESENT_CPU to reflect
> > > > > > > > > > that it makes possible CPUs present.
> > > > > > > > >
> > > > > > > > > Honestly, I don't think that this change is necessary or even useful.
> > > > > > > >
> > > > > > > > Whilst it's an attempt to avoid future confusion, the rename is
> > > > > > > > not something I really care about so my advice to Russell is drop
> > > > > > > > it unless you are attached to it!
> > > > > > >
> > > > > > > While I agree that it isn't a necessity, I don't fully agree that it
> > > > > > > isn't useful.
> > > > > > >
> > > > > > > One of the issues will be that while Arm64 will support hotplug vCPU,
> > > > > > > it won't be setting ACPI_HOTPLUG_CPU because it doesn't support
> > > > > > > the present bit changing. So I can see why James decided to rename
> > > > > > > it - because with Arm64's hotplug vCPU, the idea that ACPI_HOTPLUG_CPU
> > > > > > > somehow enables hotplug CPU support is now no longer true.
> > > > > > >
> > > > > > > Keeping it as ACPI_HOTPLUG_CPU makes the code less obvious, because it
> > > > > > > leads one to assume that it ought to be enabled for Arm64's
> > > > > > > implementatinon, and that could well cause issues in the future if
> > > > > > > people make the assumption that "ACPI_HOTPLUG_CPU" means hotplug CPU
> > > > > > > is supported in ACPI. It doesn't anymore.
> > > > > >
> > > > > > On x86 there is no confusion AFAICS. It's always meant "as long as
> > > > > > the platform supports it".
> > > > >
> > > > > That's x86, which supports physical CPU hotplug. We're introducing
> > > > > support for Arm64 here which doesn't support physical CPU hotplug.
> > > > >
> > > > > ACPI-based Physical Virtual
> > > > > Arch HOTPLUG_CPU ACPI_HOTPLUG_CPU Hotplug Hotplug Hotplug
> > > > > Arm64 Y N Y N Y
> > > > > x86 Y Y Y Y Y
> > > > >
> > > > > So ACPI_HOTPLUG_CPU becomes totally misnamed with the introduction
> > > > > of hotplug on Arm64.
> > > > >
> > > > > If we want to just look at stuff from an x86 perspective, then yes,
> > > > > it remains correct to call it ACPI_HOTPLUG_CPU. It isn't correct as
> > > > > soon as we add Arm64, as I already said.
> > > >
> > > > And if you rename it, it becomes less confusing for ARM64, but more
> > > > confusing for x86, which basically is my point.
> > > >
> > > > IMO "hotplug" covers both cases well enough and "hotplug present" is
> > > > only accurate for one of them.
> > > >
> > > > > And honestly, a two line quip to my reasoned argument is not IMHO
> > > > > an acceptable reply.
> > > >
> > > > Well, I'm not even sure how to respond to this ...
> > >
> > > The above explanation you give would have been useful...
> > >
> > > I don't see how "hotplug" covers both cases. As I've tried to point
> > > out many times now, ACPI_HOTPLUG_CPU is N for Arm64, yet it supports
> > > ACPI based hotplug. How does ACPI_HOTPLUG_CPU cover Arm64 if it's
> > > N there?
> >
> > But IIUC this change is preliminary for changing it (or equivalent
> > option with a different name) to Y, isn't it?
>
> No. As I keep saying, ACPI_HOTPLUG_CPU ends up N on Arm64 even when
> it supports hotplug CPU via ACPI.
>
> Even with the full Arm64 patch set here, under arch/ we still only
> have:
>
> arch/loongarch/Kconfig: select ACPI_HOTPLUG_PRESENT_CPU if ACPI_PROCESSOR && HOTPLUG_CPU
> arch/x86/Kconfig: select ACPI_HOTPLUG_PRESENT_CPU if ACPI_PROCESSOR && HOTPLUG_CPU
>
> To say it yet again, ACPI_HOTPLUG_(PRESENT_)CPU is *never* set on
> Arm64.
Allright, so ARM64 is not going to use the code that is conditional on
ACPI_HOTPLUG_CPU today.
Fair enough.
> > > IMHO it totally doesn't, and moreover, it goes against what
> > > one would logically expect - and this is why I have a problem with
> > > your effective NAK for this change. I believe you are basically
> > > wrong on this for the reasons I've given - that ACPI_HOTPLUG_CPU
> > > will be N for Arm64 despite it supporting ACPI-based CPU hotplug.
> >
> > So I still have to understand how renaming it for all architectures
> > (including x86) is supposed to help.
> >
> > It will still be the same option under a different name. How does
> > that change things technically?
>
> Do you think that it makes any sense to have support for ACPI-based
> hotplug CPU
So this is all about what you and I mean by "ACPI-based hotplug CPU".
> *and* having it functional with a configuration symbol
> named "ACPI_HOTPLUG_CPU" to be set to N ? That's essentially what
> you are advocating for...
Setting ACPI_HOTPLUG_CPU to N means that you are not going to compile
the code that is conditional on it.
That code allows the processor driver to be removed from CPUs and
arch_unregister_cpu() to be called from within acpi_bus_trim() (among
other things). On the way up, it allows arch_register_cpu() to be
called from within acpi_bus_scan(). If these things are not done,
what I mean by "ACPI-based hotplug CPU" is not supported.
More information about the linux-arm-kernel
mailing list