[PATCH] arm64: dts: rockchip: set num-cs property for spi on px30

[Quentin Schulz]

Hi Heiko,

On 1/19/24 11:16, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner at cherry.de>
> 
> The px30 has two spi controllers with two chip-selects each.
> The num-cs property is specified as the total number of chip
> selects a controllers has and is used since 2020 to find uses
> of chipselects outside that range in the Rockchip spi driver.
> 
> Without the property set, the default is 1, so spi devices
> using the second chipselect will not be created.
> 
> Fixes: eb1262e3cc8b ("spi: spi-rockchip: use num-cs property and ctlr->enable_gpiods")
> Signed-off-by: Heiko Stuebner <heiko.stuebner at cherry.de>

Reviewed-by: Quentin Schulz <quentin.schulz at theobroma-systems.com>

Cheers,
Quentin