[PATCH net-next v3 2/7] net: dsa: mt7530: use p5_interface_select as data type for p5_intf_sel

Arınç ÜNAL via B4 Relay devnull+arinc.unal.arinc9.com at kernel.org
Sun Jan 21 21:35:53 PST 2024


From: Arınç ÜNAL <arinc.unal at arinc9.com>

Use the p5_interface_select enumeration as the data type for the
p5_intf_sel field. This ensures p5_intf_sel can only take the values
defined in the p5_interface_select enumeration.

Remove the explicit assignment of 0 to P5_DISABLED as the first enum item
is automatically assigned 0.

Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
Acked-by: Daniel Golle <daniel at makrotopia.org>
Reviewed-by: Vladimir Oltean <olteanv at gmail.com>
---
 drivers/net/dsa/mt7530.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index ebfb3a7acfcd..9cbf18efa416 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -683,7 +683,7 @@ struct mt7530_port {
 
 /* Port 5 interface select definitions */
 enum p5_interface_select {
-	P5_DISABLED = 0,
+	P5_DISABLED,
 	P5_INTF_SEL_PHY_P0,
 	P5_INTF_SEL_PHY_P4,
 	P5_INTF_SEL_GMAC5,
@@ -776,7 +776,7 @@ struct mt7530_priv {
 	bool			mcm;
 	phy_interface_t		p6_interface;
 	phy_interface_t		p5_interface;
-	unsigned int		p5_intf_sel;
+	enum p5_interface_select p5_intf_sel;
 	u8			mirror_rx;
 	u8			mirror_tx;
 	struct mt7530_port	ports[MT7530_NUM_PORTS];

-- 
2.40.1




More information about the linux-arm-kernel mailing list