[PATCH] arm64: dts: ti: Disable clock output of the ethernet PHY

[Wadim Egorov]

Am 19.01.24 um 23:52 schrieb Nathan Morrisson:
> The clock on the ethernet1 PHY is turned on by default. This turns
> the clock off as we do not use it.
>
> Signed-off-by: Nathan Morrisson <nmorrisson at phytec.com>

Reviewed-by: Wadim Egorov <w.egorov at phytec.de>


> ---
>   arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts | 1 +
>   1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
> index 4bc0134c987d..3173f6eca7ca 100644
> --- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
> @@ -222,6 +222,7 @@ &cpsw3g_mdio {
>   	cpsw3g_phy3: ethernet-phy at 3 {
>   		compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
>   		reg = <3>;
> +		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
>   		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
>   		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
>   	};