[PATCH 5/8] clk: qcom: support for duplicate freq in RCG2 freq table

[Andrew Lunn]

On Sun, Jan 21, 2024 at 08:42:34PM +0800, Ziyang Huang wrote:
> From: Praveenkumar I <ipkumar at codeaurora.org>
> 
> Currently RCG code looks up the frequency table during set
> rate and return the first available frequency greater than
> requested rate. If CLK_SET_RATE_PARENT flag is set then the
> set_rate request will go to its parent otherwise the clock
> framework will configure pre-div, m and n according to the
> returned frequency table entry. In this case, it is assuming
> that parent clock will run in the same frequency with which
> pre-div, m and n has been derived. But it may be possible
> that the parent clock supports multiple frequency and the
> same frequency can be derived with different pre-div, m and
> n values depending upon current frequency.  Also, the same
> frequency can be derived from different parent sources and
> currently there is no option for having duplicate
> frequencies in frequency table and choosing the best one
> according to current rate.
> 
> Now this patch adds the support for having duplicate
> frequencies in frequency table. During set rate, it will
> compare the actual rate for each entry with requested rate
> and will select the best entry in which the difference will
> be less.
> 
> The existing functionality won’t be affected with this code
> change since this code change will hit only if frequency
> table has duplicate values.

A good commit message for a change!

> 
> Change-Id: I97d9e1b55d8f3ee095f6f01729af527ba90e50e5
> Signed-off-by: Abhishek Sahu <absahu at codeaurora.org>
> (cherry picked from commit 775e7d3b69ffc97afb5bd5a6c9c423f2f4d8a0b2)
> Signed-off-by: Praveenkumar I <ipkumar at codeaurora.org>
> 
> Change-Id: If10193fc79a3c1375ab73597813745ff1f4df0ad
> 
> Pick from https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/commit/6dfb368bae130bee58e00ddf8330b55066e1c8c5
> 
> Signed-off-by: Ziyang Huang <hzyitc at outlook.com>

Please clean up these tags. These Change-ID tags are meaningless in
mainline. 775e7d3b69ffc97afb5bd5a6c9c423f2f4d8a0b2 is not in mainline
either. The picked from might be interesting, but please put it into
the body of the commit message, not mixed in with the tags.

Who actually wrote this patch? The first Signed-off-by: is from
Abhishek Sahu. But you have a From of Praveenkumar I ?

    Andrew

---
pw-bot: cr