[PATCH V2] tty: serial: Fix bit order in RS485 flag definitions

[Jiri Slaby]

On 18. 01. 24, 16:46, Christoph Niedermaier wrote:
> Since the commit 93f3350c46fa ("RS485: fix inconsistencies in the
> meaning of some variables"), the definition for bit 3 has been removed.
> But with the switch to bit shift macros in commit 76ac8e29855b ("tty:
> serial: Cleanup the bit shift with macro"), this gap wasn't preserved.
> To avoid a break in user/kernel api of the system skip bit 3 again and
> add a placeholder comment.
> 
> Signed-off-by: Christoph Niedermaier <cniedermaier at dh-electronics.com>
> Fixes: 76ac8e29855b ("tty: serial: Cleanup the bit shift with macro")
> Fixes: 6056f20f27e9 ("tty: serial: Add RS422 flag to struct serial_rs485")
> ---

This triple dash is superfluous and will likely break git am.

> Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
> Cc: Crescent CY Hsieh <crescentcy.hsieh at moxa.com>
> Cc: Jiri Slaby <jirislaby at kernel.org>
> Cc: Lukas Wunner <lukas at wunner.de>
> Cc: Lino Sanfilippo <l.sanfilippo at kunbus.com>
> Cc: Hugo Villeneuve <hugo at hugovil.com>
> To: linux-serial at vger.kernel.org
> To: linux-arm-kernel at lists.infradead.org

"To" is not supported here, IMO.

When you fix that:
Reviewed-by: Jiri Slaby <jirislaby at kernel.org>

> ---
> V2: - Fix typo
>      - Add Fixes tags
> ---
>   include/uapi/linux/serial.h | 13 +++++++------
>   1 file changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h
> index 9086367db043..de9b4733607e 100644
> --- a/include/uapi/linux/serial.h
> +++ b/include/uapi/linux/serial.h
> @@ -145,12 +145,13 @@ struct serial_rs485 {
>   #define SER_RS485_ENABLED		_BITUL(0)
>   #define SER_RS485_RTS_ON_SEND		_BITUL(1)
>   #define SER_RS485_RTS_AFTER_SEND	_BITUL(2)
> -#define SER_RS485_RX_DURING_TX		_BITUL(3)
> -#define SER_RS485_TERMINATE_BUS		_BITUL(4)
> -#define SER_RS485_ADDRB			_BITUL(5)
> -#define SER_RS485_ADDR_RECV		_BITUL(6)
> -#define SER_RS485_ADDR_DEST		_BITUL(7)
> -#define SER_RS485_MODE_RS422		_BITUL(8)
> +/* Placeholder for bit 3: SER_RS485_RTS_BEFORE_SEND, which isn't used anymore */
> +#define SER_RS485_RX_DURING_TX		_BITUL(4)
> +#define SER_RS485_TERMINATE_BUS		_BITUL(5)
> +#define SER_RS485_ADDRB			_BITUL(6)
> +#define SER_RS485_ADDR_RECV		_BITUL(7)
> +#define SER_RS485_ADDR_DEST		_BITUL(8)
> +#define SER_RS485_MODE_RS422		_BITUL(9)
>   
>   	__u32	delay_rts_before_send;
>   	__u32	delay_rts_after_send;

-- 
js
suse labs