[PATCH 9/9] PCI/pwrseq: add a pwrseq driver for QCA6390
Bartosz Golaszewski
brgl at bgdev.pl
Wed Jan 17 08:07:48 PST 2024
From: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
Add a PCI power sequencing driver that's capable of correctly powering
up the ath11k module on QCA6390 and WCN7850 using the PCI pwrseq
functionality.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
[Neil: add support for WCN7850]
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
drivers/pci/pwrseq/Kconfig | 8 +
drivers/pci/pwrseq/Makefile | 1 +
drivers/pci/pwrseq/pci-pwrseq-qca6390.c | 267 ++++++++++++++++++++++++
3 files changed, 276 insertions(+)
create mode 100644 drivers/pci/pwrseq/pci-pwrseq-qca6390.c
diff --git a/drivers/pci/pwrseq/Kconfig b/drivers/pci/pwrseq/Kconfig
index a721a8a955c3..667c9c121f34 100644
--- a/drivers/pci/pwrseq/Kconfig
+++ b/drivers/pci/pwrseq/Kconfig
@@ -5,4 +5,12 @@ menu "PCI Power sequencing drivers"
config PCI_PWRSEQ
bool
+config PCI_PWRSEQ_QCA6390
+ tristate "PCI Power Sequencing driver for QCA6390"
+ select PCI_PWRSEQ
+ default (ATH11K_PCI && ARCH_QCOM)
+ help
+ Enable support for the PCI power sequencing driver for the
+ ath11k module of the QCA6390 WLAN/BT chip.
+
endmenu
diff --git a/drivers/pci/pwrseq/Makefile b/drivers/pci/pwrseq/Makefile
index 4052b6bb5aa5..5cf8cce01e82 100644
--- a/drivers/pci/pwrseq/Makefile
+++ b/drivers/pci/pwrseq/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PCI_PWRSEQ) += pwrseq.o
+obj-$(CONFIG_PCI_PWRSEQ_QCA6390) += pci-pwrseq-qca6390.o
diff --git a/drivers/pci/pwrseq/pci-pwrseq-qca6390.c b/drivers/pci/pwrseq/pci-pwrseq-qca6390.c
new file mode 100644
index 000000000000..cdf3639ea29f
--- /dev/null
+++ b/drivers/pci/pwrseq/pci-pwrseq-qca6390.c
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2023 Linaro Ltd.
+ */
+
+#include <linux/bitmap.h>
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pci-pwrseq.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+struct pci_pwrseq_qca6390_vreg {
+ const char *name;
+ unsigned int load_uA;
+};
+
+struct pci_pwrseq_qca6390_pdata {
+ struct pci_pwrseq_qca6390_vreg *vregs;
+ size_t num_vregs;
+ unsigned int delay_msec;
+};
+
+struct pci_pwrseq_qca6390_ctx {
+ struct pci_pwrseq pwrseq;
+ const struct pci_pwrseq_qca6390_pdata *pdata;
+ struct regulator_bulk_data *regs;
+ struct gpio_descs *en_gpios;
+ unsigned long *en_gpios_values;
+ struct clk *clk;
+};
+
+static struct pci_pwrseq_qca6390_vreg pci_pwrseq_qca6390_vregs[] = {
+ {
+ .name = "vddio",
+ .load_uA = 20000,
+ },
+ {
+ .name = "vddaon",
+ .load_uA = 100000,
+ },
+ {
+ .name = "vddpmu",
+ .load_uA = 1250000,
+ },
+ {
+ .name = "vddpcie1",
+ .load_uA = 35000,
+ },
+ {
+ .name = "vddpcie2",
+ .load_uA = 15000,
+ },
+ {
+ .name = "vddrfa1",
+ .load_uA = 200000,
+ },
+ {
+ .name = "vddrfa2",
+ .load_uA = 400000,
+ },
+ {
+ .name = "vddrfa3",
+ .load_uA = 400000,
+ },
+};
+
+static struct pci_pwrseq_qca6390_pdata pci_pwrseq_qca6390_of_data = {
+ .vregs = pci_pwrseq_qca6390_vregs,
+ .num_vregs = ARRAY_SIZE(pci_pwrseq_qca6390_vregs),
+ .delay_msec = 16,
+};
+
+static struct pci_pwrseq_qca6390_vreg pci_pwrseq_wcn7850_vregs[] = {
+ {
+ .name = "vdd",
+ },
+ {
+ .name = "vddio",
+ },
+ {
+ .name = "vddio12",
+ },
+ {
+ .name = "vddaon",
+ },
+ {
+ .name = "vdddig",
+ },
+ {
+ .name = "vddrfa1",
+ },
+ {
+ .name = "vddrfa2",
+ },
+};
+
+static struct pci_pwrseq_qca6390_pdata pci_pwrseq_wcn7850_of_data = {
+ .vregs = pci_pwrseq_wcn7850_vregs,
+ .num_vregs = ARRAY_SIZE(pci_pwrseq_wcn7850_vregs),
+ .delay_msec = 50,
+};
+
+static int pci_pwrseq_qca6390_power_on(struct pci_pwrseq_qca6390_ctx *ctx)
+{
+ int ret;
+
+ ret = regulator_bulk_enable(ctx->pdata->num_vregs, ctx->regs);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(ctx->clk);
+ if (ret)
+ return ret;
+
+ bitmap_fill(ctx->en_gpios_values, ctx->en_gpios->ndescs);
+
+ ret = gpiod_set_array_value_cansleep(ctx->en_gpios->ndescs,
+ ctx->en_gpios->desc,
+ ctx->en_gpios->info,
+ ctx->en_gpios_values);
+ if (ret) {
+ regulator_bulk_disable(ctx->pdata->num_vregs, ctx->regs);
+ return ret;
+ }
+
+ if (ctx->pdata->delay_msec)
+ msleep(ctx->pdata->delay_msec);
+
+ return 0;
+}
+
+static int pci_pwrseq_qca6390_power_off(struct pci_pwrseq_qca6390_ctx *ctx)
+{
+ int ret;
+
+ bitmap_zero(ctx->en_gpios_values, ctx->en_gpios->ndescs);
+
+ ret = gpiod_set_array_value_cansleep(ctx->en_gpios->ndescs,
+ ctx->en_gpios->desc,
+ ctx->en_gpios->info,
+ ctx->en_gpios_values);
+ if (ret)
+ return ret;
+
+ clk_disable_unprepare(ctx->clk);
+
+ return regulator_bulk_disable(ctx->pdata->num_vregs, ctx->regs);
+}
+
+static void devm_pci_pwrseq_qca6390_power_off(void *data)
+{
+ struct pci_pwrseq_qca6390_ctx *ctx = data;
+
+ pci_pwrseq_qca6390_power_off(ctx);
+}
+
+static int pci_pwrseq_qca6390_probe(struct platform_device *pdev)
+{
+ struct pci_pwrseq_qca6390_ctx *ctx;
+ struct device *dev = &pdev->dev;
+ int ret, i;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->pdata = of_device_get_match_data(dev);
+ if (!ctx->pdata)
+ return dev_err_probe(dev, -ENODEV,
+ "Failed to obtain platform data\n");
+
+ if (ctx->pdata->vregs) {
+ ctx->regs = devm_kcalloc(dev, ctx->pdata->num_vregs,
+ sizeof(*ctx->regs), GFP_KERNEL);
+ if (!ctx->regs)
+ return -ENOMEM;
+
+ for (i = 0; i < ctx->pdata->num_vregs; i++)
+ ctx->regs[i].supply = ctx->pdata->vregs[i].name;
+
+ ret = devm_regulator_bulk_get(dev, ctx->pdata->num_vregs,
+ ctx->regs);
+ if (ret < 0)
+ return dev_err_probe(dev, ret,
+ "Failed to get all regulators\n");
+
+ for (i = 0; i < ctx->pdata->num_vregs; i++) {
+ if (!ctx->pdata->vregs[1].load_uA)
+ continue;
+
+ ret = regulator_set_load(ctx->regs[i].consumer,
+ ctx->pdata->vregs[i].load_uA);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to set vreg load\n");
+ }
+ }
+
+ ctx->clk = devm_clk_get_optional(dev, NULL);
+ if (IS_ERR(ctx->clk))
+ return dev_err_probe(dev, PTR_ERR(ctx->clk),
+ "Failed to get clock\n");
+
+ ctx->en_gpios = devm_gpiod_get_array_optional(dev, "enable",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->en_gpios))
+ return dev_err_probe(dev, PTR_ERR(ctx->en_gpios),
+ "Failed to get enable GPIOs\n");
+
+ ctx->en_gpios_values = devm_bitmap_zalloc(dev, ctx->en_gpios->ndescs,
+ GFP_KERNEL);
+ if (!ctx->en_gpios_values)
+ return -ENOMEM;
+
+ ret = pci_pwrseq_qca6390_power_on(ctx);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to power on the device\n");
+
+ ret = devm_add_action_or_reset(dev, devm_pci_pwrseq_qca6390_power_off,
+ ctx);
+ if (ret)
+ return ret;
+
+ ctx->pwrseq.dev = dev;
+
+ ret = devm_pci_pwrseq_device_enable(dev, &ctx->pwrseq);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to register the pwrseq wrapper\n");
+
+ return 0;
+}
+
+static const struct of_device_id pci_pwrseq_qca6390_of_match[] = {
+ {
+ .compatible = "pci17cb,1101",
+ .data = &pci_pwrseq_qca6390_of_data,
+ },
+ {
+ .compatible = "pci17cb,1107",
+ .data = &pci_pwrseq_wcn7850_of_data,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pci_pwrseq_qca6390_of_match);
+
+static struct platform_driver pci_pwrseq_qca6390_driver = {
+ .driver = {
+ .name = "pci-pwrseq-qca6390",
+ .of_match_table = pci_pwrseq_qca6390_of_match,
+ },
+ .probe = pci_pwrseq_qca6390_probe,
+};
+module_platform_driver(pci_pwrseq_qca6390_driver);
+
+MODULE_AUTHOR("Bartosz Golaszewski <bartosz.golaszewski at linaro.org>");
+MODULE_DESCRIPTION("PCI Power Sequencing module for QCA6390");
+MODULE_LICENSE("GPL");
--
2.40.1
More information about the linux-arm-kernel
mailing list