[PATCH v2 1/3] dt-bindings: rockchip: Document rk809 support for rk817 audio codec

[Tim Lunn]

On 1/17/24 20:22, Krzysztof Kozlowski wrote:
> On 17/01/2024 10:19, Tim Lunn wrote:
>> On 1/17/24 04:06, Conor Dooley wrote:
>>> On Wed, Jan 17, 2024 at 12:21:00AM +1100, Tim Lunn wrote:
>>>> Rockchip RK809 shares the same audio codec as the rk817 mfd, it is also
>>>> using the same rk817_codec driver. However it is missing from the
>>>> bindings.
>>>>
>>>> Update dt-binding documentation for rk809 to include the audio codec
>>>> properties. This fixes the following warning from dtb check:
>>>>
>>>> pmic at 20: '#sound-dai-cells', 'assigned-clock-parents', 'assigned-clocks',
>>>>      'clock-names', 'clocks', 'codec' do not match any of the regexes:
>>>>      'pinctrl-[0-9]+'
>>>>
>>>> Signed-off-by: Tim Lunn<tim at feathertop.org>
>>>> ---
>>>>
>>>> (no changes since v1)
>>>>
>>>>    .../bindings/mfd/rockchip,rk809.yaml          | 30 ++++++++++++++++++-
>>>>    1 file changed, 29 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
>>>> index 839c0521f1e5..bac2e751e2f2 100644
>>>> --- a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
>>>> +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
>>>> @@ -12,7 +12,7 @@ maintainers:
>>>>    
>>>>    description: |
>>>>      Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD
>>>> -  that includes regulators, an RTC, and power button.
>>>> +  that includes regulators, an RTC, a power button, and an audio codec.
>>>>    
>>>>    properties:
>>>>      compatible:
>>>> @@ -93,6 +93,34 @@ properties:
>>>>            unevaluatedProperties: false
>>>>        unevaluatedProperties: false
>>>>    
>>>> +  clocks:
>>>> +    description:
>>>> +      The input clock for the audio codec.
>>>> +
>>>> +  clock-names:
>>>> +    description:
>>>> +      The clock name for the codec clock.
>>>> +    items:
>>>> +      - const: mclk
>>> You have one clock only, why do you need to have clock-names?
>> This is just documenting the existing rk817 codec driver, which is using
>> the name to get the clock:
>>
>> devm_clk_get(pdev->dev.parent, "mclk");
>>
>> Thus i dont think clock-names can  be removed in this case? atleast not
>> without patching the driver as well?
> Your commit msg claims this is for existing driver using rk817_codec. So
> what about rk817? It does not use clocks?
>
rk817 uses exactly the same properties as what I included here. i.e it 
includes both clocks and clock-names.
My point above was that I dont think I can just remove the clock-names 
property as Conor suggested? I could be wrong though.
>
> Best regards,
> Krzysztof
>