[PATCH AUTOSEL 6.1 43/68] ARM: dts: imx23-sansa: Use preferred i2c-gpios properties

[Sasha Levin]

From: Fabio Estevam <festevam at denx.de>

[ Upstream commit e3aa1a82fb20ee97597022f6528823a8ab82bde6 ]

The 'gpios' property to describe the SDA and SCL GPIOs is considered
deprecated according to i2c-gpio.yaml.

Switch to the preferred 'sda-gpios' and 'scl-gpios' properties.

This fixes the following schema warnings:

imx23-sansa.dtb: i2c-0: 'sda-gpios' is a required property
	from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
imx23-sansa.dtb: i2c-0: 'scl-gpios' is a required property
	from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#

Signed-off-by: Fabio Estevam <festevam at denx.de>
Signed-off-by: Shawn Guo <shawnguo at kernel.org>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 arch/arm/boot/dts/imx23-sansa.dts | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts
index 46057d9bf555..c2efcc20ae80 100644
--- a/arch/arm/boot/dts/imx23-sansa.dts
+++ b/arch/arm/boot/dts/imx23-sansa.dts
@@ -175,10 +175,8 @@ i2c-0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio1 24 0		/* SDA */
-			&gpio1 22 0		/* SCL */
-		>;
+		sda-gpios = <&gpio1 24 0>;
+		scl-gpios = <&gpio1 22 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 	};
 
@@ -186,10 +184,8 @@ i2c-1 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio0 31 0		/* SDA */
-			&gpio0 30 0		/* SCL */
-		>;
+		sda-gpios = <&gpio0 31 0>;
+		scl-gpios = <&gpio0 30 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 
 		touch: touch at 20 {
-- 
2.43.0