[PATCH AUTOSEL 6.6 063/104] arm64: zynqmp: Move fixed clock to / for kv260

[Sasha Levin]

From: Michal Simek <michal.simek at amd.com>

[ Upstream commit 6a10a19a6bd2fd8d27a510678bf87bd9408f51d8 ]

fixed clock nodes can't be on the bus because they are missing reg
property. That's why move them to root.
And because it is root it is good to have it as the first node in a file.

Signed-off-by: Michal Simek <michal.simek at amd.com>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 .../boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso | 28 ++++++++---------
 .../boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 30 +++++++++----------
 2 files changed, 29 insertions(+), 29 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
index ae1b9b2bdbee..dee238739290 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -21,20 +21,7 @@
 /dts-v1/;
 /plugin/;
 
-&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1_default>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	/* u14 - 0x40 - ina260 */
-	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
-};
-
-&amba {
+&{/} {
 	si5332_0: si5332_0 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -72,6 +59,19 @@ si5332_5: si5332_5 { /* u17 */
 	};
 };
 
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* u14 - 0x40 - ina260 */
+	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
 /* DP/USB 3.0 and SATA */
 &psgtr {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
index b59e48be6465..73c5cb156caf 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -16,21 +16,7 @@
 /dts-v1/;
 /plugin/;
 
-&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1_default>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	/* u14 - 0x40 - ina260 */
-	/* u43 - 0x2d - usb5744 */
-	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
-};
-
-&amba {
+&{/} {
 	si5332_0: si5332_0 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -68,6 +54,20 @@ si5332_5: si5332_5 { /* u17 */
 	};
 };
 
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* u14 - 0x40 - ina260 */
+	/* u43 - 0x2d - usb5744 */
+	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
 /* DP/USB 3.0 */
 &psgtr {
 	status = "okay";
-- 
2.43.0