[PATCH v2 2/2] input/navpoint: remove driver
Duje Mihanović
duje.mihanovic at skole.hr
Tue Jan 16 11:48:07 PST 2024
This driver does not use the SPI core as it should, instead tampering
with the SSP registers manually. Refactoring the driver is almost
certainly not worth it as the hardware seems to have been designed for
and used only in the HP iPAQ hx4700 removed more than a year ago in
d6df7df7ae5a ("ARM: pxa: remove unused board files"), so let's remove
it.
Signed-off-by: Duje Mihanović <duje.mihanovic at skole.hr>
---
drivers/input/mouse/Kconfig | 12 --
drivers/input/mouse/Makefile | 1 -
drivers/input/mouse/navpoint.c | 350 -----------------------------------------
include/linux/input/navpoint.h | 8 -
4 files changed, 371 deletions(-)
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 32cc4c62a716..833b643f0616 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -439,16 +439,4 @@ config MOUSE_SYNAPTICS_USB
To compile this driver as a module, choose M here: the
module will be called synaptics_usb.
-config MOUSE_NAVPOINT_PXA27x
- tristate "Synaptics NavPoint (PXA27x SSP/SPI)"
- depends on PXA27x && PXA_SSP
- help
- This driver adds support for the Synaptics NavPoint touchpad connected
- to a PXA27x SSP port in SPI slave mode. The device emulates a mouse;
- a tap or tap-and-a-half drag gesture emulates the left mouse button.
- For example, use the xf86-input-evdev driver for an X pointing device.
-
- To compile this driver as a module, choose M here: the
- module will be called navpoint.
-
endif
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 92b3204ce84e..a1336d5bee6f 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o
obj-$(CONFIG_MOUSE_INPORT) += inport.o
obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o
obj-$(CONFIG_MOUSE_MAPLE) += maplemouse.o
-obj-$(CONFIG_MOUSE_NAVPOINT_PXA27x) += navpoint.o
obj-$(CONFIG_MOUSE_PC110PAD) += pc110pad.o
obj-$(CONFIG_MOUSE_PS2) += psmouse.o
obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o
diff --git a/drivers/input/mouse/navpoint.c b/drivers/input/mouse/navpoint.c
deleted file mode 100644
index ba757783c258..000000000000
--- a/drivers/input/mouse/navpoint.c
+++ /dev/null
@@ -1,350 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Synaptics NavPoint (PXA27x SSP/SPI) driver.
- *
- * Copyright (C) 2012 Paul Parsons <lost.distance at yahoo.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio/consumer.h>
-#include <linux/input.h>
-#include <linux/input/navpoint.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-#include <linux/pxa2xx_ssp.h>
-#include <linux/slab.h>
-
-/*
- * Synaptics Modular Embedded Protocol: Module Packet Format.
- * Module header byte 2:0 = Length (# bytes that follow)
- * Module header byte 4:3 = Control
- * Module header byte 7:5 = Module Address
- */
-#define HEADER_LENGTH(byte) ((byte) & 0x07)
-#define HEADER_CONTROL(byte) (((byte) >> 3) & 0x03)
-#define HEADER_ADDRESS(byte) ((byte) >> 5)
-
-struct navpoint {
- struct ssp_device *ssp;
- struct input_dev *input;
- struct device *dev;
- struct gpio_desc *gpiod;
- int index;
- u8 data[1 + HEADER_LENGTH(0xff)];
-};
-
-/*
- * Initialization values for SSCR0_x, SSCR1_x, SSSR_x.
- */
-static const u32 sscr0 = 0
- | SSCR0_TUM /* TIM = 1; No TUR interrupts */
- | SSCR0_RIM /* RIM = 1; No ROR interrupts */
- | SSCR0_SSE /* SSE = 1; SSP enabled */
- | SSCR0_Motorola /* FRF = 0; Motorola SPI */
- | SSCR0_DataSize(16) /* DSS = 15; Data size = 16-bit */
- ;
-static const u32 sscr1 = 0
- | SSCR1_SCFR /* SCFR = 1; SSPSCLK only during transfers */
- | SSCR1_SCLKDIR /* SCLKDIR = 1; Slave mode */
- | SSCR1_SFRMDIR /* SFRMDIR = 1; Slave mode */
- | SSCR1_RWOT /* RWOT = 1; Receive without transmit mode */
- | SSCR1_RxTresh(1) /* RFT = 0; Receive FIFO threshold = 1 */
- | SSCR1_SPH /* SPH = 1; SSPSCLK inactive 0.5 + 1 cycles */
- | SSCR1_RIE /* RIE = 1; Receive FIFO interrupt enabled */
- ;
-static const u32 sssr = 0
- | SSSR_BCE /* BCE = 1; Clear BCE */
- | SSSR_TUR /* TUR = 1; Clear TUR */
- | SSSR_EOC /* EOC = 1; Clear EOC */
- | SSSR_TINT /* TINT = 1; Clear TINT */
- | SSSR_PINT /* PINT = 1; Clear PINT */
- | SSSR_ROR /* ROR = 1; Clear ROR */
- ;
-
-/*
- * MEP Query $22: Touchpad Coordinate Range Query is not supported by
- * the NavPoint module, so sampled values provide the default limits.
- */
-#define NAVPOINT_X_MIN 1278
-#define NAVPOINT_X_MAX 5340
-#define NAVPOINT_Y_MIN 1572
-#define NAVPOINT_Y_MAX 4396
-#define NAVPOINT_PRESSURE_MIN 0
-#define NAVPOINT_PRESSURE_MAX 255
-
-static void navpoint_packet(struct navpoint *navpoint)
-{
- int finger;
- int gesture;
- int x, y, z;
-
- switch (navpoint->data[0]) {
- case 0xff: /* Garbage (packet?) between reset and Hello packet */
- case 0x00: /* Module 0, NULL packet */
- break;
-
- case 0x0e: /* Module 0, Absolute packet */
- finger = (navpoint->data[1] & 0x01);
- gesture = (navpoint->data[1] & 0x02);
- x = ((navpoint->data[2] & 0x1f) << 8) | navpoint->data[3];
- y = ((navpoint->data[4] & 0x1f) << 8) | navpoint->data[5];
- z = navpoint->data[6];
- input_report_key(navpoint->input, BTN_TOUCH, finger);
- input_report_abs(navpoint->input, ABS_X, x);
- input_report_abs(navpoint->input, ABS_Y, y);
- input_report_abs(navpoint->input, ABS_PRESSURE, z);
- input_report_key(navpoint->input, BTN_TOOL_FINGER, finger);
- input_report_key(navpoint->input, BTN_LEFT, gesture);
- input_sync(navpoint->input);
- break;
-
- case 0x19: /* Module 0, Hello packet */
- if ((navpoint->data[1] & 0xf0) == 0x10)
- break;
- fallthrough;
- default:
- dev_warn(navpoint->dev,
- "spurious packet: data=0x%02x,0x%02x,...\n",
- navpoint->data[0], navpoint->data[1]);
- break;
- }
-}
-
-static irqreturn_t navpoint_irq(int irq, void *dev_id)
-{
- struct navpoint *navpoint = dev_id;
- struct ssp_device *ssp = navpoint->ssp;
- irqreturn_t ret = IRQ_NONE;
- u32 status;
-
- status = pxa_ssp_read_reg(ssp, SSSR);
- if (status & sssr) {
- dev_warn(navpoint->dev,
- "unexpected interrupt: status=0x%08x\n", status);
- pxa_ssp_write_reg(ssp, SSSR, (status & sssr));
- ret = IRQ_HANDLED;
- }
-
- while (status & SSSR_RNE) {
- u32 data;
-
- data = pxa_ssp_read_reg(ssp, SSDR);
- navpoint->data[navpoint->index + 0] = (data >> 8);
- navpoint->data[navpoint->index + 1] = data;
- navpoint->index += 2;
- if (HEADER_LENGTH(navpoint->data[0]) < navpoint->index) {
- navpoint_packet(navpoint);
- navpoint->index = 0;
- }
- status = pxa_ssp_read_reg(ssp, SSSR);
- ret = IRQ_HANDLED;
- }
-
- return ret;
-}
-
-static void navpoint_up(struct navpoint *navpoint)
-{
- struct ssp_device *ssp = navpoint->ssp;
- int timeout;
-
- clk_prepare_enable(ssp->clk);
-
- pxa_ssp_write_reg(ssp, SSCR1, sscr1);
- pxa_ssp_write_reg(ssp, SSSR, sssr);
- pxa_ssp_write_reg(ssp, SSTO, 0);
- pxa_ssp_write_reg(ssp, SSCR0, sscr0); /* SSCR0_SSE written last */
-
- /* Wait until SSP port is ready for slave clock operations */
- for (timeout = 100; timeout != 0; --timeout) {
- if (!(pxa_ssp_read_reg(ssp, SSSR) & SSSR_CSS))
- break;
- msleep(1);
- }
-
- if (timeout == 0)
- dev_err(navpoint->dev,
- "timeout waiting for SSSR[CSS] to clear\n");
-
- gpiod_set_value(navpoint->gpiod, 1);
-}
-
-static void navpoint_down(struct navpoint *navpoint)
-{
- struct ssp_device *ssp = navpoint->ssp;
-
- gpiod_set_value(navpoint->gpiod, 0);
-
- pxa_ssp_write_reg(ssp, SSCR0, 0);
-
- clk_disable_unprepare(ssp->clk);
-}
-
-static int navpoint_open(struct input_dev *input)
-{
- struct navpoint *navpoint = input_get_drvdata(input);
-
- navpoint_up(navpoint);
-
- return 0;
-}
-
-static void navpoint_close(struct input_dev *input)
-{
- struct navpoint *navpoint = input_get_drvdata(input);
-
- navpoint_down(navpoint);
-}
-
-static int navpoint_probe(struct platform_device *pdev)
-{
- const struct navpoint_platform_data *pdata =
- dev_get_platdata(&pdev->dev);
- struct ssp_device *ssp;
- struct input_dev *input;
- struct navpoint *navpoint;
- int error;
-
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data\n");
- return -EINVAL;
- }
-
- ssp = pxa_ssp_request(pdata->port, pdev->name);
- if (!ssp)
- return -ENODEV;
-
- /* HaRET does not disable devices before jumping into Linux */
- if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) {
- pxa_ssp_write_reg(ssp, SSCR0, 0);
- dev_warn(&pdev->dev, "ssp%d already enabled\n", pdata->port);
- }
-
- navpoint = kzalloc(sizeof(*navpoint), GFP_KERNEL);
- input = input_allocate_device();
- if (!navpoint || !input) {
- error = -ENOMEM;
- goto err_free_mem;
- }
-
- navpoint->gpiod = gpiod_get_optional(&pdev->dev,
- NULL, GPIOD_OUT_LOW);
- if (IS_ERR(navpoint->gpiod)) {
- error = PTR_ERR(navpoint->gpiod);
- dev_err(&pdev->dev, "error getting GPIO\n");
- goto err_free_mem;
- }
- gpiod_set_consumer_name(navpoint->gpiod, "SYNAPTICS_ON");
-
- navpoint->ssp = ssp;
- navpoint->input = input;
- navpoint->dev = &pdev->dev;
-
- input->name = pdev->name;
- input->dev.parent = &pdev->dev;
-
- __set_bit(EV_KEY, input->evbit);
- __set_bit(EV_ABS, input->evbit);
- __set_bit(BTN_LEFT, input->keybit);
- __set_bit(BTN_TOUCH, input->keybit);
- __set_bit(BTN_TOOL_FINGER, input->keybit);
-
- input_set_abs_params(input, ABS_X,
- NAVPOINT_X_MIN, NAVPOINT_X_MAX, 0, 0);
- input_set_abs_params(input, ABS_Y,
- NAVPOINT_Y_MIN, NAVPOINT_Y_MAX, 0, 0);
- input_set_abs_params(input, ABS_PRESSURE,
- NAVPOINT_PRESSURE_MIN, NAVPOINT_PRESSURE_MAX,
- 0, 0);
-
- input->open = navpoint_open;
- input->close = navpoint_close;
-
- input_set_drvdata(input, navpoint);
-
- error = request_irq(ssp->irq, navpoint_irq, 0, pdev->name, navpoint);
- if (error)
- goto err_free_mem;
-
- error = input_register_device(input);
- if (error)
- goto err_free_irq;
-
- platform_set_drvdata(pdev, navpoint);
- dev_dbg(&pdev->dev, "ssp%d, irq %d\n", pdata->port, ssp->irq);
-
- return 0;
-
-err_free_irq:
- free_irq(ssp->irq, navpoint);
-err_free_mem:
- input_free_device(input);
- kfree(navpoint);
- pxa_ssp_free(ssp);
-
- return error;
-}
-
-static void navpoint_remove(struct platform_device *pdev)
-{
- struct navpoint *navpoint = platform_get_drvdata(pdev);
- struct ssp_device *ssp = navpoint->ssp;
-
- free_irq(ssp->irq, navpoint);
-
- input_unregister_device(navpoint->input);
- kfree(navpoint);
-
- pxa_ssp_free(ssp);
-}
-
-static int navpoint_suspend(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct navpoint *navpoint = platform_get_drvdata(pdev);
- struct input_dev *input = navpoint->input;
-
- mutex_lock(&input->mutex);
- if (input_device_enabled(input))
- navpoint_down(navpoint);
- mutex_unlock(&input->mutex);
-
- return 0;
-}
-
-static int navpoint_resume(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct navpoint *navpoint = platform_get_drvdata(pdev);
- struct input_dev *input = navpoint->input;
-
- mutex_lock(&input->mutex);
- if (input_device_enabled(input))
- navpoint_up(navpoint);
- mutex_unlock(&input->mutex);
-
- return 0;
-}
-
-static DEFINE_SIMPLE_DEV_PM_OPS(navpoint_pm_ops,
- navpoint_suspend, navpoint_resume);
-
-static struct platform_driver navpoint_driver = {
- .probe = navpoint_probe,
- .remove_new = navpoint_remove,
- .driver = {
- .name = "navpoint",
- .pm = pm_sleep_ptr(&navpoint_pm_ops),
- },
-};
-
-module_platform_driver(navpoint_driver);
-
-MODULE_AUTHOR("Paul Parsons <lost.distance at yahoo.com>");
-MODULE_DESCRIPTION("Synaptics NavPoint (PXA27x SSP/SPI) driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:navpoint");
diff --git a/include/linux/input/navpoint.h b/include/linux/input/navpoint.h
deleted file mode 100644
index 5192ae3f5ec1..000000000000
--- a/include/linux/input/navpoint.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2012 Paul Parsons <lost.distance at yahoo.com>
- */
-
-struct navpoint_platform_data {
- int port; /* PXA SSP port for pxa_ssp_request() */
-};
--
2.43.0
More information about the linux-arm-kernel
mailing list