[PATCH v2] dt-bindings: soc: xilinx: Add support for K26 rev2 SOMs

[Michal Simek]

On 1/16/24 19:00, Rob Herring wrote:
> On Fri, Jan 12, 2024 at 10:20:29AM +0100, Michal Simek wrote:
>> Revision 2 is SW compatible with revision 1 but it is necessary to reflect
>> it in model and compatible properties which are parsed by user space.
>> Rev 2 has improved a power on boot reset and MIO34 shutdown glich
>> improvement done via an additional filter in the GreenPak chip.
>>
>> Signed-off-by: Michal Simek <michal.simek at amd.com>
>> ---
>>
>> Changes in v2:
>> - Support older combinations
>>
>> I want to support all versions we created:
>> All of them:
>> -rev2, -rev1, -revB, -revA, "xlnx,zynqmp-smk-k26", "xlnx,zynqmp"
>>
>> rev1:
>> -rev1, -revB, -revA, "xlnx,zynqmp-smk-k26", "xlnx,zynqmp"
>>
>> revB:
>> -revB, -revA, "xlnx,zynqmp-smk-k26", "xlnx,zynqmp"
>>
>> revA:
>> -revA, "xlnx,zynqmp-smk-k26", "xlnx,zynqmp"
>>
>> And also single one are permitted:
>> -revB, "xlnx,zynqmp-smk-k26", "xlnx,zynqmp"
>> -rev1, "xlnx,zynqmp-smk-k26", "xlnx,zynqmp"
>> -rev2, "xlnx,zynqmp-smk-k26", "xlnx,zynqmp"
>>
>> I didn't find a way to pretty much all the time force that there must be
>> both "xlnx,zynqmp-smk-k26", "xlnx,zynqmp" that's why there is only
>> requested to have xlnx,zynqmp. If you find a way how to encode it please
>> let me know.
>>
>> ---
>>   .../bindings/soc/xilinx/xilinx.yaml           | 32 +++++++++++++------
>>   1 file changed, 22 insertions(+), 10 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml b/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml
>> index d4c0fe1fe435..39242efeec47 100644
>> --- a/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml
>> +++ b/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml
>> @@ -117,20 +117,32 @@ properties:
>>             - const: xlnx,zynqmp
>>   
>>         - description: Xilinx Kria SOMs
>> +        additionalItems: true
>> +        maxItems: 6
>> +        minItems: 3
>>           items:
>> -          - const: xlnx,zynqmp-sm-k26-rev1
>> -          - const: xlnx,zynqmp-sm-k26-revB
>> -          - const: xlnx,zynqmp-sm-k26-revA
>> -          - const: xlnx,zynqmp-sm-k26
>> -          - const: xlnx,zynqmp
>> +          - enum:
>> +              - xlnx,zynqmp-sm-k26-rev2
>> +              - xlnx,zynqmp-sm-k26-rev1
>> +              - xlnx,zynqmp-sm-k26-revB
>> +              - xlnx,zynqmp-sm-k26-revA
>> +              - xlnx,zynqmp-sm-k26
>> +        contains:
>> +          const: xlnx,zynqmp
> 
> This allows:
> 
> xlnx,zynqmp-sm-k26-rev2, foo, xlnx,zynqmp, bar
> 
> You need the schema form of 'items' (no '-'). For multiple contains, you
> need 'allOf'. Like this:
> 
> items:
>    enum: [ all of them ]
> allOf:
>    - contains:
>        const: xlnx,zynqmp
>    - contains:
>        const: xlnx,zynqmp-sm-k26
> 
> 
> This of course has no enforcement of the order. Just no sane way to do
> that in json-schema.

Works for me. If below is fine I will send v3 version.

       - description: Xilinx Kria SOMs
         minItems: 3
         items:
           enum:
             - xlnx,zynqmp-sm-k26-rev2
             - xlnx,zynqmp-sm-k26-rev1
             - xlnx,zynqmp-sm-k26-revB
             - xlnx,zynqmp-sm-k26-revA
             - xlnx,zynqmp-sm-k26
             - xlnx,zynqmp
         allOf:
           - contains:
               const: xlnx,zynqmp
           - contains:
               const: xlnx,zynqmp-sm-k26

Thanks,
Michal