[PATCH 2/2] arm64: dts: imx93-phycore-segin: Add Phytec i.MX93 Segin

[Fabio Estevam]

On Tue, Jan 16, 2024 at 8:39 AM Mathieu Othacehe <othacehe at gnu.org> wrote:

> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 2e027675d7bb..6cb6d9f8783e 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -203,6 +203,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx93-phycore-segin.dtb

Please keep this in alphabetical order.

> +#include "imx93-phycore-som.dtsi"
> +
> +/{
> +       model = "PHYTEC phyBOARD-Segin-i.MX93";
> +       compatible = "phytec,imx93-phycore-segin",
> +                    "phytec,imx93-phycore-som", "fsl,imx93";

Can't the compatible be in a single line?

> +       model = "PHYTEC phyCORE-i.MX93";
> +       compatible = "phytec,imx93-phycore-som", "fsl,imx93";
> +
> +       reserved-memory {
> +               ranges;
> +               #address-cells = <2>;
> +               #size-cells = <2>;

Is this needed?

> +&iomuxc {
> +       pinctrl_usdhc1: usdhc1grp {
> +               fsl,pins = <
> +                       MX93_PAD_SD1_CLK__USDHC1_CLK            0x15fe
> +                       MX93_PAD_SD1_CMD__USDHC1_CMD            0x13fe
> +                       MX93_PAD_SD1_DATA0__USDHC1_DATA0        0x13fe
> +                       MX93_PAD_SD1_DATA1__USDHC1_DATA1        0x13fe
> +                       MX93_PAD_SD1_DATA2__USDHC1_DATA2        0x13fe
> +                       MX93_PAD_SD1_DATA3__USDHC1_DATA3        0x13fe
> +                       MX93_PAD_SD1_DATA4__USDHC1_DATA4        0x13fe
> +                       MX93_PAD_SD1_DATA5__USDHC1_DATA5        0x13fe
> +                       MX93_PAD_SD1_DATA6__USDHC1_DATA6        0x13fe
> +                       MX93_PAD_SD1_DATA7__USDHC1_DATA7        0x13fe
> +                       MX93_PAD_SD1_STROBE__USDHC1_STROBE      0x15fe
> +               >;
> +       };
> +

Please remove this blank line.
> +};