[PATCH 1/2] dt-bindings: misc: xlnx,sd-fec: convert bindings to yaml
Dragan Cvetic
dragan.cvetic at amd.com
Tue Jan 16 03:11:34 PST 2024
Convert AMD (Xilinx) sd-fec bindings to yaml format, so it can validate
dt-entries as well as any future additions to yaml.
Conversion txt to yamal is done "one to one", no new changes in txt file
has been made.
Reviewed-by: Michal Simek <michal.simek at amd.com>
Signed-off-by: Dragan Cvetic <dragan.cvetic at amd.com>
---
.../devicetree/bindings/misc/xlnx,sd-fec.txt | 58 --------
.../devicetree/bindings/misc/xlnx,sd-fec.yaml | 132 ++++++++++++++++++
2 files changed, 132 insertions(+), 58 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
create mode 100644 Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml
diff --git a/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
deleted file mode 100644
index e3289634fa30..000000000000
--- a/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Xilinx SDFEC(16nm) IP *
-
-The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block
-which provides high-throughput LDPC and Turbo Code implementations.
-The LDPC decode & encode functionality is capable of covering a range of
-customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality
-principally covers codes used by LTE. The FEC Engine offers significant
-power and area savings versus implementations done in the FPGA fabric.
-
-
-Required properties:
-- compatible: Must be "xlnx,sd-fec-1.1"
-- clock-names : List of input clock names from the following:
- - "core_clk", Main processing clock for processing core (required)
- - "s_axi_aclk", AXI4-Lite memory-mapped slave interface clock (required)
- - "s_axis_din_aclk", DIN AXI4-Stream Slave interface clock (optional)
- - "s_axis_din_words-aclk", DIN_WORDS AXI4-Stream Slave interface clock (optional)
- - "s_axis_ctrl_aclk", Control input AXI4-Stream Slave interface clock (optional)
- - "m_axis_dout_aclk", DOUT AXI4-Stream Master interface clock (optional)
- - "m_axis_dout_words_aclk", DOUT_WORDS AXI4-Stream Master interface clock (optional)
- - "m_axis_status_aclk", Status output AXI4-Stream Master interface clock (optional)
-- clocks : Clock phandles (see clock_bindings.txt for details).
-- reg: Should contain Xilinx SDFEC 16nm Hardened IP block registers
- location and length.
-- xlnx,sdfec-code : Should contain "ldpc" or "turbo" to describe the codes
- being used.
-- xlnx,sdfec-din-words : A value 0 indicates that the DIN_WORDS interface is
- driven with a fixed value and is not present on the device, a value of 1
- configures the DIN_WORDS to be block based, while a value of 2 configures the
- DIN_WORDS input to be supplied for each AXI transaction.
-- xlnx,sdfec-din-width : Configures the DIN AXI stream where a value of 1
- configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
- of "4x128b".
-- xlnx,sdfec-dout-words : A value 0 indicates that the DOUT_WORDS interface is
- driven with a fixed value and is not present on the device, a value of 1
- configures the DOUT_WORDS to be block based, while a value of 2 configures the
- DOUT_WORDS input to be supplied for each AXI transaction.
-- xlnx,sdfec-dout-width : Configures the DOUT AXI stream where a value of 1
- configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
- of "4x128b".
-Optional properties:
-- interrupts: should contain SDFEC interrupt number
-
-Example
----------------------------------------
- sd_fec_0: sd-fec at a0040000 {
- compatible = "xlnx,sd-fec-1.1";
- clock-names = "core_clk","s_axi_aclk","s_axis_ctrl_aclk","s_axis_din_aclk","m_axis_status_aclk","m_axis_dout_aclk";
- clocks = <&misc_clk_2>,<&misc_clk_0>,<&misc_clk_1>,<&misc_clk_1>,<&misc_clk_1>, <&misc_clk_1>;
- reg = <0x0 0xa0040000 0x0 0x40000>;
- interrupt-parent = <&axi_intc>;
- interrupts = <1 0>;
- xlnx,sdfec-code = "ldpc";
- xlnx,sdfec-din-words = <0>;
- xlnx,sdfec-din-width = <2>;
- xlnx,sdfec-dout-words = <0>;
- xlnx,sdfec-dout-width = <1>;
- };
diff --git a/Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml
new file mode 100644
index 000000000000..05bc01cb5075
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/xlnx,sd-fec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx SDFEC(16nm) IP
+
+maintainers:
+ - Cvetic, Dragan <dragan.cvetic at amd.com>
+ - Erim, Salih <salih.erim at amd.com>
+
+description: |
+ The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block
+ which provides high-throughput LDPC and Turbo Code implementations.
+ The LDPC decode & encode functionality is capable of covering a range of
+ customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality
+ principally covers codes used by LTE. The FEC Engine offers significant
+ power and area savings versus implementations done in the FPGA fabric.
+
+properties:
+ compatible:
+ const: xlnx,sd-fec-1.1
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: List of clock specifiers.
+ additionalItems: true
+ minItems: 2
+ maxItems: 8
+ items:
+ - description: Main processing clock for processing core.
+ - description: AXI4-Lite memory-mapped slave interface clock.
+ - description: Control input AXI4-Stream Slave interface clock.
+ - description: DIN AXI4-Stream Slave interface clock.
+ - description: Status output AXI4-Stream Master interface clock.
+ - description: DOUT AXI4-Stream Master interface clock.
+ - description: DIN_WORDS AXI4-Stream Slave interface clock
+ - description: DOUT_WORDS AXI4-Stream Master interface clock
+
+ clock-names:
+ additionalItems: true
+ minItems: 2
+ maxItems: 8
+ items:
+ - const: core_clk
+ - const: s_axi_aclk
+ - enum:
+ - s_axis_ctrl_aclk
+ - s_axis_din_aclk
+ - m_axis_status_aclk
+ - m_axis_dout_aclk
+ - s_axis_din_words_aclk
+ - m_axis_dout_words_aclk
+
+ interrupts:
+ maxItems: 1
+
+ xlnx,sdfec-code:
+ description:
+ Should contain "ldpc" or "turbo" to describe the codes being used.
+ $ref: /schemas/types.yaml#/definitions/string-array
+ items:
+ enum: [ ldpc, turbo ]
+
+ xlnx,sdfec-din-width:
+ description: |
+ Configures the DIN AXI stream where a value of 1
+ configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
+ of "4x128b".
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 1, 2, 4 ]
+
+ xlnx,sdfec-din-words:
+ description: |
+ A value 0 indicates that the DIN_WORDS interface is
+ driven with a fixed value and is not present on the device, a value of 1
+ configures the DIN_WORDS to be block based, while a value of 2 configures the
+ DIN_WORDS input to be supplied for each AXI transaction.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2 ]
+
+ xlnx,sdfec-dout-width:
+ description: |
+ Configures the DOUT AXI stream where a value of 1 configures a width of "1x128b",
+ 2 a width of "2x128b" and 4 configures a width of "4x128b".
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 1, 2, 4 ]
+
+ xlnx,sdfec-dout-words:
+ description: |
+ A value 0 indicates that the DOUT_WORDS interface is
+ driven with a fixed value and is not present on the device, a value of 1
+ configures the DOUT_WORDS to be block based, while a value of 2 configures the
+ DOUT_WORDS input to be supplied for each AXI transaction.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2 ]
+
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - xlnx,sdfec-code
+ - xlnx,sdfec-din-width
+ - xlnx,sdfec-din-words
+ - xlnx,sdfec-dout-width
+ - xlnx,sdfec-dout-words
+
+additionalProperties: false
+
+examples:
+ - |
+ sd-fec at a0040000 {
+ compatible = "xlnx,sd-fec-1.1";
+ reg = <0xa0040000 0x40000>;
+ clocks = <&misc_clk_2>, <&misc_clk_0>, <&misc_clk_1>, <&misc_clk_1>,
+ <&misc_clk_1>, <&misc_clk_1>;
+ clock-names = "core_clk", "s_axi_aclk", "s_axis_ctrl_aclk",
+ "s_axis_din_aclk", "m_axis_status_aclk",
+ "m_axis_dout_aclk";
+ interrupts = <1 0>;
+ xlnx,sdfec-code = "ldpc";
+ xlnx,sdfec-din-width = <2>;
+ xlnx,sdfec-din-words = <0>;
+ xlnx,sdfec-dout-width = <1>;
+ xlnx,sdfec-dout-words = <0>;
+ };
+
--
2.17.1
More information about the linux-arm-kernel
mailing list