[PATCH 2/2] arm64: dts: ti: k3-am625-beagleplay: Add boot phase tags for USB0

[Sjoerd Simons]

The USB0 port on the beagleplay can be used for DFU booting. To enable
that functionality mark with bootph-all.

Signed-off-by: Sjoerd Simons <sjoerd at collabora.com>

---

 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index eadbdd9ffe37..1c243ec63dd8 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -573,11 +573,13 @@ &mcu_i2c0 {
 };
 
 &usbss0 {
+	bootph-all;
 	ti,vbus-divider;
 	status = "okay";
 };
 
 &usb0 {
+	bootph-all;
 	dr_mode = "peripheral";
 };
 
-- 
2.43.0