[RFC 3/9] PCI/portdrv: create platform devices for child OF nodes

[Manivannan Sadhasivam]

On Wed, Jan 10, 2024 at 12:41:17PM -0800, Dan Williams wrote:
> [ add Terry ]
> 
> 
> Lukas Wunner wrote:
> > On Wed, Jan 10, 2024 at 01:55:18PM +0100, Bartosz Golaszewski wrote:
> > > On Tue, Jan 9, 2024 at 3:43???PM Lukas Wunner <lukas at wunner.de> wrote:
> > > > On Thu, Jan 04, 2024 at 02:01:17PM +0100, Bartosz Golaszewski wrote:
> > > > > In order to introduce PCIe power-sequencing, we need to create platform
> > > > > devices for child nodes of the port driver node. They will get matched
> > > > > against the pwrseq drivers (if one exists) and then the actuak PCIe
> > > > > device will reuse the node once it's detected on the bus.
> > > > [...]
> > > > > --- a/drivers/pci/pcie/portdrv.c
> > > > > +++ b/drivers/pci/pcie/portdrv.c
> > > > > @@ -715,7 +716,7 @@ static int pcie_portdrv_probe(struct pci_dev *dev,
> > > > >               pm_runtime_allow(&dev->dev);
> > > > >       }
> > > > >
> > > > > -     return 0;
> > > > > +     return devm_of_platform_populate(&dev->dev);
> > > > >  }
> > > >
> > > > I think this belongs in of_pci_make_dev_node(), portdrv seems totally
> > > > the wrong place.  Note that you're currently calling this for RCECs
> > > > (Root Complex Event Collectors) as well, which is likely not what
> > > > you want.
> > > >
> > > 
> > > of_pci_make_dev_node() is only called when the relevant PCI device is
> > > instantiated which doesn't happen until it's powered-up and scanned -
> > > precisely the problem I'm trying to address.
> > 
> > No, of_pci_make_dev_node() is called *before* device_attach(),
> > i.e. before portdrv has even probed.  So it seems this should
> > work perfectly well for your use case.
> > 
> > 
> > > > devm functions can't be used in the PCI core, so symmetrically call
> > > > of_platform_unpopulate() from of_pci_remove_node().
> > > 
> > > I don't doubt what you're saying is true (I've seen worse things) but
> > > this is the probe() callback of a driver using the driver model. Why
> > > wouldn't devres work?
> > 
> > The long term plan is to move the functionality in portdrv to
> > the PCI core.  Because devm functions can't be used in the PCI
> > core, adding new ones to portdrv will *add* a new roadblock to
> > migrating portdrv to the PCI core.  In other words, it makes
> > future maintenance more difficult.
> > 
> > Generally, only PCIe port services which share the same interrupt
> > (hotplug, PME, bandwith notification, flit error counter, ...)
> > need to live in portdrv.  Arbitrary other stuff should not be
> > shoehorned into portdrv.
> 
> I came here to say the same thing. It is already the case that portdrv
> is not a good model to build new functionality upon [1], and PCI core
> enlightenment should be considered first.
> 

The primary reason for plugging the power sequencing into portdrv is due to
portdrv binding with all the bridge devices and acting as management driver for
the bridges. This is where exactly the power sequencing part needs to be plugged
in IMO. But if the idea of the portdrv is just to expose services based on
interrupts, then please suggest a better place to plug this power sequencing
part.

- Mani

> The portdrv model is impeding Terry's CXL Port error handling effort, so
> I am on the lookout for portdrv growing new entanglements to unwind
> later.
> 
> [1]: http://lore.kernel.org/r/20221025232535.GA579167@bhelgaas
> 

-- 
மணிவண்ணன் சதாசிவம்