[PATCH v2 1/6] dt-bindings: display: add dt-bindings for STM32 LVDS device
Raphael Gallais-Pou
raphael.gallais-pou at foss.st.com
Thu Jan 11 02:40:44 PST 2024
Add "st,stm32-lvds" compatible.
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou at foss.st.com>
---
Changes in v2:
- Switch compatible and clock-cells related areas
- Remove faulty #include in the example.
- Add entry in MAINTAINERS
---
.../bindings/display/st,stm32-lvds.yaml | 117 ++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 118 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/st,stm32-lvds.yaml
diff --git a/Documentation/devicetree/bindings/display/st,stm32-lvds.yaml b/Documentation/devicetree/bindings/display/st,stm32-lvds.yaml
new file mode 100644
index 000000000000..8dfc6e88f260
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/st,stm32-lvds.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/st,stm32-lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 LVDS Display Interface Transmitter
+
+maintainers:
+ - Raphael Gallais-Pou <raphael.gallais-pou at foss.st.com>
+ - Yannick Fertre <yannick.fertre at foss.st.com>
+
+description: |
+ The STMicroelectronics STM32 LVDS Display Interface Transmitter handles the
+ LVDS protocol: it maps the pixels received from the upstream Pixel-DMA (LTDC)
+ onto the LVDS PHY.
+
+ It regroups three sub blocks:
+ - LVDS host: handles the LVDS protocol (FPD / OpenLDI) and maps its input
+ pixels onto the data lanes of the PHY
+ - LVDS PHY: parallelize the data and drives the LVDS data lanes
+ - LVDS wrapper: handles top-level settings
+
+ The LVDS controller driver supports the following high-level features:
+ - FDP-Link-I and OpenLDI (v0.95) protocols
+ - Single-Link or Dual-Link operation
+ - Single-Display or Double-Display (with the same content duplicated on both)
+ - Flexible Bit-Mapping, including JEIDA and VESA
+ - RGB888 or RGB666 output
+ - Synchronous design, with one input pixel per clock cycle
+
+properties:
+ compatible:
+ const: st,stm32-lvds
+
+ "#clock-cells":
+ const: 0
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: APB peripheral clock
+ - description: Reference clock for the internal PLL
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: ref
+
+ resets:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ LVDS input port node, connected to the LTDC RGB output port.
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ LVDS output port node, connected to a panel or bridge input port.
+
+ required:
+ - port at 0
+ - port at 1
+
+required:
+ - compatible
+ - "#clock-cells"
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/stm32mp25-clks.h>
+ #include <dt-bindings/reset/stm32mp25-resets.h>
+
+ lvds: lvds at 48060000 {
+ compatible = "st,stm32-lvds";
+ reg = <0x48060000 0x2000>;
+ #clock-cells = <0>;
+ clocks = <&rcc CK_BUS_LVDS>, <&rcc CK_KER_LVDSPHY>;
+ clock-names = "pclk", "ref";
+ resets = <&rcc LVDS_R>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ lvds_in: endpoint {
+ remote-endpoint = <<dc_ep1_out>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ lvds_out0: endpoint {
+ remote-endpoint = <&lvds_panel_in>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 9d959a6881f7..0b6ec5347195 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7193,6 +7193,7 @@ L: dri-devel at lists.freedesktop.org
S: Maintained
T: git git://anongit.freedesktop.org/drm/drm-misc
F: Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
+F: Documentation/devicetree/bindings/display/st,stm32-lvds.yaml
F: drivers/gpu/drm/stm
DRM DRIVERS FOR TI KEYSTONE
--
2.25.1
More information about the linux-arm-kernel
mailing list