[PATCH v4 0/5] Add Mediatek ISP3.0

[Laurent Pinchart]

Hi Julien,

Thank you for the patches.

On Wed, Jan 10, 2024 at 03:14:37PM +0100, Julien Stephan wrote:
> This series adds the support of the Mediatek ISP3.0 found on some
> Mediatek SoCs such as the mt8365. The driver is divided into 2 parts:
> 
> * SENINF: the sensor interface
> * CAMSV: this driver provides a path to bypass the SoC ISP so that image
>   data coming from the SENINF can go directly into memory without any
>   image processing. This allows the use of an external ISP or camera
>   sensor directly.

I'm afraid this doesn't compile based on the latest media tree's master
branch, scheduled for v6.8-rc1. I've pushed the following fixes to [1]:

0d2e75fb8909 media: mediatek: isp_30: Update to new subdev state API
05dc498f151a media: mediatek: isp_30: Update to new subdev state API

You can squash those in v5 when you will rebase on v6.8-rc1.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git/log/?h=mtk/v6.8/pumpkin/camera

> The SENINF driver is based on previous work done by Louis Kuo available
> as an RFC here: https://lore.kernel.org/all/20200708104023.3225-1-louis.kuo@mediatek.com/
> 
> This series depends on the following series for the phy [1]
> 
> Changes in v4:
> - fix suspend/resume deadlock
> - fix various locking issues reported by Laurent Pinchart on v3
> - run LOCKDEP
> - add missing include reported by kernel-test-robot for non mediatek arch and COMPILE_TEST=y
> - use atomic poll inside mtk_camsv30_setup
> - drop second lane support as it was not used 
> - remove useless members in structs
> - fix media entity initialization
> - initialize correct pad for camsv video device
> - add isp support in mt8365.dtsi
> - rebase on 6.7
> 
> Changes in v3:
> - fix a lot of formatting issues/coding style issues found in camsv/seninf reported by Angelo on v2
> - fix camsv/seninf binding file error reported by Rob
> 
> Changes in v2:
> - renamed clock `cam_seninf` to `camsys`
> - renamed clock `top_mux_seninf` to `top_mux`
> - moved phy properties from port nodes to top level
> - remove patternProperties
> - specify power management dependency in the cover letter description to fix
>   missing include in dt-binding example
> - change '$ref' properties on some endpoint nodes from
>   '$ref: video-interfaces.yaml#' to '$ref: /schemas/graph.yaml#/$defs/endpoint-base'
>  where applicable
> 
> Best
> Julien Stephan
> 
> [1] : https://lore.kernel.org/all/20230620121928.1231745-1-jstephan@baylibre.com/
> 
> 
> 
> Louis Kuo (2):
>   dt-bindings: media: add mediatek ISP3.0 sensor interface
>   media: platform: mediatek: isp_30: add mediatek ISP3.0 sensor
>     interface
> 
> Phi-bang Nguyen (2):
>   dt-bindings: media: add mediatek ISP3.0 camsv
>   media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv
> 
>  .../bindings/media/mediatek,mt8365-camsv.yaml |  109 ++
>  .../media/mediatek,mt8365-seninf.yaml         |  259 +++
>  MAINTAINERS                                   |   10 +
>  arch/arm64/boot/dts/mediatek/mt8365.dtsi      |  128 ++
>  drivers/media/platform/mediatek/Kconfig       |    1 +
>  drivers/media/platform/mediatek/Makefile      |    1 +
>  drivers/media/platform/mediatek/isp/Kconfig   |    2 +
>  drivers/media/platform/mediatek/isp/Makefile  |    3 +
>  .../platform/mediatek/isp/isp_30/Kconfig      |   35 +
>  .../platform/mediatek/isp/isp_30/Makefile     |    4 +
>  .../mediatek/isp/isp_30/camsv/Makefile        |    7 +
>  .../mediatek/isp/isp_30/camsv/mtk_camsv.c     |  328 ++++
>  .../mediatek/isp/isp_30/camsv/mtk_camsv.h     |  199 +++
>  .../isp/isp_30/camsv/mtk_camsv30_hw.c         |  427 +++++
>  .../isp/isp_30/camsv/mtk_camsv30_regs.h       |   60 +
>  .../isp/isp_30/camsv/mtk_camsv_video.c        |  774 +++++++++
>  .../mediatek/isp/isp_30/seninf/Makefile       |    5 +
>  .../mediatek/isp/isp_30/seninf/mtk_seninf.c   | 1488 +++++++++++++++++
>  .../isp/isp_30/seninf/mtk_seninf_reg.h        |  112 ++
>  19 files changed, 3952 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
>  create mode 100644 drivers/media/platform/mediatek/isp/Kconfig
>  create mode 100644 drivers/media/platform/mediatek/isp/Makefile
>  create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Kconfig
>  create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Makefile
>  create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/Makefile
>  create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.c
>  create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.h
>  create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_hw.c
>  create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_regs.h
>  create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv_video.c
>  create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile
>  create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c
>  create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h

-- 
Regards,

Laurent Pinchart