[PATCH v9 3/3] remoteproc: zynqmp: parse TCM from device tree
Tanmay Shah
tanmay.shah at amd.com
Wed Jan 10 13:35:05 PST 2024
ZynqMP TCM information was fixed in driver. Now ZynqMP TCM information
is available in device-tree. Parse TCM information in driver
as per new bindings.
Signed-off-by: Tanmay Shah <tanmay.shah at amd.com>
---
Changes in v9:
- Introduce new API to request and release core1 TCM power-domains in
lockstep mode. This will be used during prepare -> add_tcm_banks
callback to enable TCM in lockstep mode.
- Parse TCM from device-tree in lockstep mode and split mode in
uniform way.
- Fix TCM representation in device-tree in lockstep mode.
Changes in v8:
- Remove pm_domains framework
- Remove checking of pm_domain_id validation to power on/off tcm
- Remove spurious change
- parse power-domains property from device-tree and use EEMI calls
to power on/off TCM instead of using pm domains framework
Changes in v7:
- move checking of pm_domain_id from previous patch
- fix mem_bank_data memory allocation
drivers/remoteproc/xlnx_r5_remoteproc.c | 245 +++++++++++++++++++++++-
1 file changed, 239 insertions(+), 6 deletions(-)
diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c
index 4395edea9a64..0f87b984850b 100644
--- a/drivers/remoteproc/xlnx_r5_remoteproc.c
+++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
@@ -74,8 +74,8 @@ struct mbox_info {
};
/*
- * Hardcoded TCM bank values. This will be removed once TCM bindings are
- * accepted for system-dt specifications and upstreamed in linux kernel
+ * Hardcoded TCM bank values. This will stay in driver to maintain backward
+ * compatibility with device-tree that does not have TCM information.
*/
static const struct mem_bank_data zynqmp_tcm_banks_split[] = {
{0xffe00000UL, 0x0, 0x10000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 64KB each */
@@ -102,6 +102,7 @@ static const struct mem_bank_data zynqmp_tcm_banks_lockstep[] = {
* @rproc: rproc handle
* @pm_domain_id: RPU CPU power domain id
* @ipi: pointer to mailbox information
+ * @lockstep_core1_np: second core's device_node to use in lockstep mode
*/
struct zynqmp_r5_core {
struct device *dev;
@@ -111,6 +112,7 @@ struct zynqmp_r5_core {
struct rproc *rproc;
u32 pm_domain_id;
struct mbox_info *ipi;
+ struct device_node *lockstep_core1_np;
};
/**
@@ -539,6 +541,110 @@ static int tcm_mem_map(struct rproc *rproc,
return 0;
}
+int request_core1_tcm_lockstep(struct rproc *rproc)
+{
+ struct zynqmp_r5_core *r5_core = rproc->priv;
+ struct of_phandle_args out_args = {0};
+ int ret, i, num_pd, pd_id, ret_err;
+ struct device_node *np;
+
+ np = r5_core->lockstep_core1_np;
+
+ /* Get number of power-domains */
+ num_pd = of_count_phandle_with_args(np, "power-domains",
+ "#power-domain-cells");
+ if (num_pd <= 0)
+ return -EINVAL;
+
+ /* Get individual power-domain id and enable TCM */
+ for (i = 1; i < num_pd; i++) {
+ ret = of_parse_phandle_with_args(np, "power-domains",
+ "#power-domain-cells",
+ i, &out_args);
+ if (ret) {
+ dev_warn(r5_core->dev,
+ "failed to get tcm %d in power-domains list, ret %d\n",
+ i, ret);
+ goto fail_request_core1_tcm;
+ }
+
+ pd_id = out_args.args[0];
+ of_node_put(out_args.np);
+
+ ret = zynqmp_pm_request_node(pd_id, ZYNQMP_PM_CAPABILITY_ACCESS, 0,
+ ZYNQMP_PM_REQUEST_ACK_BLOCKING);
+ if (ret) {
+ dev_err(r5_core->dev, "failed to request TCM node 0x%x\n",
+ pd_id);
+ goto fail_request_core1_tcm;
+ }
+ }
+
+ return 0;
+
+fail_request_core1_tcm:
+
+ /* Cache actual error to return later */
+ ret_err = ret;
+
+ /* Release previously requested TCM in case of failure */
+ while (--i > 0) {
+ ret = of_parse_phandle_with_args(np, "power-domains",
+ "#power-domain-cells",
+ i, &out_args);
+ if (ret)
+ return ret;
+ pd_id = out_args.args[0];
+ of_node_put(out_args.np);
+ zynqmp_pm_release_node(pd_id);
+ }
+
+ return ret_err;
+}
+
+void release_core1_tcm_lockstep(struct rproc *rproc)
+{
+ struct zynqmp_r5_core *r5_core = rproc->priv;
+ struct of_phandle_args out_args = {0};
+ struct zynqmp_r5_cluster *cluster;
+ int ret, i, num_pd, pd_id;
+ struct device_node *np;
+
+ /* Get R5 core1 node */
+ cluster = dev_get_drvdata(r5_core->dev->parent);
+
+ if (cluster->mode != LOCKSTEP_MODE)
+ return;
+
+ np = r5_core->lockstep_core1_np;
+
+ /* Get number of power-domains */
+ num_pd = of_count_phandle_with_args(np, "power-domains",
+ "#power-domain-cells");
+ if (num_pd <= 0)
+ return;
+
+ /* Get individual power-domain id and turn off each TCM */
+ for (i = 1; i < num_pd; i++) {
+ ret = of_parse_phandle_with_args(np, "power-domains",
+ "#power-domain-cells",
+ i, &out_args);
+ if (ret) {
+ dev_warn(r5_core->dev,
+ "failed to get pd of core1 tcm %d in list, ret %d\n",
+ i, ret);
+ continue;
+ }
+
+ pd_id = out_args.args[0];
+ of_node_put(out_args.np);
+
+ if (zynqmp_pm_release_node(pd_id))
+ dev_warn(r5_core->dev,
+ "failed to release core1 tcm pd 0x%x\n", pd_id);
+ }
+}
+
/*
* add_tcm_carveout_split_mode()
* @rproc: single R5 core's corresponding rproc instance
@@ -633,6 +739,21 @@ static int add_tcm_carveout_lockstep_mode(struct rproc *rproc)
r5_core = rproc->priv;
dev = r5_core->dev;
+ /*
+ * In lockstep mode, R5 core0 uses TCM of R5 core1 via aliased addresses.
+ * Aliased addresses are contiguous with core0 TCM and embedded in "reg"
+ * property. However, R5 core1 TCM power-domains needs to be requested
+ * from firmware to use R5 core1 TCM. Request core1 TCM power-domains
+ * if TCM is parsed from device-tree.
+ */
+ if (of_find_property(r5_core->np, "reg", NULL)) {
+ ret = request_core1_tcm_lockstep(rproc);
+ if (ret) {
+ dev_err(r5_core->dev, "failed to request core1 TCM power-domains\n");
+ return ret;
+ }
+ }
+
/* Go through zynqmp banks for r5 node */
num_banks = r5_core->tcm_bank_count;
@@ -689,6 +810,9 @@ static int add_tcm_carveout_lockstep_mode(struct rproc *rproc)
pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
zynqmp_pm_release_node(pm_domain_id);
}
+
+ release_core1_tcm_lockstep(rproc);
+
return ret;
}
@@ -808,6 +932,8 @@ static int zynqmp_r5_rproc_unprepare(struct rproc *rproc)
"can't turn off TCM bank 0x%x", pm_domain_id);
}
+ release_core1_tcm_lockstep(rproc);
+
return 0;
}
@@ -878,6 +1004,95 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev)
return ERR_PTR(ret);
}
+static int zynqmp_r5_get_tcm_node_from_dt(struct zynqmp_r5_cluster *cluster)
+{
+ int i, j, tcm_bank_count, ret, tcm_pd_idx;
+ struct of_phandle_args out_args = {0};
+ struct zynqmp_r5_core *r5_core;
+ struct platform_device *cpdev;
+ struct mem_bank_data *tcm;
+ struct device_node *np;
+ struct resource *res;
+ u64 abs_addr, size;
+ struct device *dev;
+
+ for (i = 0; i < cluster->core_count; i++) {
+ r5_core = cluster->r5_cores[i];
+ dev = r5_core->dev;
+ np = r5_core->np;
+
+ /* we have address cell 2 and size cell as 2 */
+ tcm_bank_count = of_property_count_elems_of_size(np, "reg",
+ 4 * sizeof(u32));
+ if (tcm_bank_count <= 0) {
+ dev_err(dev, "can't get reg property err %d\n", tcm_bank_count);
+ return -EINVAL;
+ }
+
+ r5_core->tcm_banks = devm_kcalloc(dev, tcm_bank_count,
+ sizeof(struct mem_bank_data *),
+ GFP_KERNEL);
+ if (!r5_core->tcm_banks)
+ ret = -ENOMEM;
+
+ r5_core->tcm_bank_count = tcm_bank_count;
+ for (j = 0, tcm_pd_idx = 1; j < tcm_bank_count; j++, tcm_pd_idx++) {
+ tcm = devm_kzalloc(dev, sizeof(struct mem_bank_data),
+ GFP_KERNEL);
+ if (!tcm)
+ return -ENOMEM;
+
+ r5_core->tcm_banks[j] = tcm;
+
+ /* Get power-domains id of TCM. */
+ ret = of_parse_phandle_with_args(np, "power-domains",
+ "#power-domain-cells",
+ tcm_pd_idx, &out_args);
+ if (ret) {
+ dev_err(r5_core->dev,
+ "failed to get tcm %d pm domain, ret %d\n",
+ tcm_pd_idx, ret);
+ return ret;
+ }
+ tcm->pm_domain_id = out_args.args[0];
+ of_node_put(out_args.np);
+
+ /* Get TCM address without translation. */
+ ret = of_property_read_reg(np, j, &abs_addr, &size);
+ if (ret) {
+ dev_err(dev, "failed to get reg property\n");
+ return ret;
+ }
+
+ /*
+ * Remote processor can address only 32 bits
+ * so convert 64-bits into 32-bits. This will discard
+ * any unwanted upper 32-bits.
+ */
+ tcm->da = (u32)abs_addr;
+ tcm->size = (u32)size;
+
+ cpdev = to_platform_device(dev);
+ res = platform_get_resource(cpdev, IORESOURCE_MEM, j);
+ if (!res) {
+ dev_err(dev, "failed to get tcm resource\n");
+ return -EINVAL;
+ }
+
+ tcm->addr = (u32)res->start;
+ tcm->bank_name = (char *)res->name;
+ res = devm_request_mem_region(dev, tcm->addr, tcm->size,
+ tcm->bank_name);
+ if (!res) {
+ dev_err(dev, "failed to request tcm resource\n");
+ return -EINVAL;
+ }
+ }
+ }
+
+ return 0;
+}
+
/**
* zynqmp_r5_get_tcm_node()
* Ideally this function should parse tcm node and store information
@@ -956,9 +1171,14 @@ static int zynqmp_r5_core_init(struct zynqmp_r5_cluster *cluster,
struct zynqmp_r5_core *r5_core;
int ret, i;
- ret = zynqmp_r5_get_tcm_node(cluster);
- if (ret < 0) {
- dev_err(dev, "can't get tcm node, err %d\n", ret);
+ r5_core = cluster->r5_cores[0];
+ if (of_find_property(r5_core->np, "reg", NULL))
+ ret = zynqmp_r5_get_tcm_node_from_dt(cluster);
+ else
+ ret = zynqmp_r5_get_tcm_node(cluster);
+
+ if (ret) {
+ dev_err(dev, "can't get tcm, err %d\n", ret);
return ret;
}
@@ -1099,7 +1319,19 @@ static int zynqmp_r5_cluster_init(struct zynqmp_r5_cluster *cluster)
* then ignore second child node.
*/
if (cluster_mode == LOCKSTEP_MODE) {
- of_node_put(child);
+ /*
+ * Get second core's device node only to use its power-domains.
+ * Also, no need to use of_node_put on first core's device_node
+ * as it is taken care by of_get_next_available_child.
+ */
+ r5_cores[i]->lockstep_core1_np =
+ of_get_next_available_child(dev_node, child);
+
+ if (!r5_cores[i]->lockstep_core1_np) {
+ ret = -EINVAL;
+ goto release_r5_cores;
+ }
+
break;
}
@@ -1158,6 +1390,7 @@ static void zynqmp_r5_cluster_exit(void *data)
r5_core = cluster->r5_cores[i];
zynqmp_r5_free_mbox(r5_core->ipi);
of_reserved_mem_device_release(r5_core->dev);
+ of_node_put(r5_core->lockstep_core1_np);
put_device(r5_core->dev);
rproc_del(r5_core->rproc);
rproc_free(r5_core->rproc);
--
2.25.1
More information about the linux-arm-kernel
mailing list