[PATCH 1/3] dt-bindings: display: convert Atmel's HLCDC to DT schema

[Rob Herring]

On Wed, 10 Jan 2024 15:55:33 +0530, Dharma Balasubiramani wrote:
> Convert the existing DT binding to DT schema of the Atmel's HLCDC display
> controller.
> 
> Signed-off-by: Dharma Balasubiramani <dharma.b at microchip.com>
> ---
>  .../display/atmel/atmel,hlcdc-dc.yaml         | 133 ++++++++++++++++++
>  .../bindings/display/atmel/hlcdc-dc.txt       |  75 ----------
>  2 files changed, 133 insertions(+), 75 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-dc.yaml
>  delete mode 100644 Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-dc.example.dtb: /example-0/hlcdc at f0030000: failed to match any schema with compatible: ['atmel,sama5d3-hlcdc']
Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-dc.example.dtb: /example-0/hlcdc at f0030000/hlcdc-pwm: failed to match any schema with compatible: ['atmel,hlcdc-pwm']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240110102535.246177-2-dharma.b@microchip.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.