[PATCH net-next 02/20] dt-bindings: net: qcom,ppe: Add bindings yaml file
Luo Jie
quic_luoj at quicinc.com
Wed Jan 10 03:40:14 PST 2024
Qualcomm PPE(packet process engine) is supported on
IPQ SOC platform.
Signed-off-by: Luo Jie <quic_luoj at quicinc.com>
---
.../devicetree/bindings/net/qcom,ppe.yaml | 1330 +++++++++++++++++
1 file changed, 1330 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/qcom,ppe.yaml
diff --git a/Documentation/devicetree/bindings/net/qcom,ppe.yaml b/Documentation/devicetree/bindings/net/qcom,ppe.yaml
new file mode 100644
index 000000000000..6afb2ad62707
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,ppe.yaml
@@ -0,0 +1,1330 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,ppe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Packet Process Engine Ethernet controller
+
+maintainers:
+ - Luo Jie <quic_luoj at quicinc.com>
+
+description:
+ The PPE(packet process engine) is comprised of three componets, Ethernet
+ DMA, Switch core and Port wrapper, Ethernet DMA is used to transmit and
+ receive packets between Ethernet subsytem and host. The Switch core has
+ maximum 8 ports(maximum 6 front panel ports and two FIFO interfaces),
+ among which there are GMAC/XGMACs used as external interfaces and FIFO
+ interfaces connected the EDMA/EIP, The port wrapper provides connections
+ from the GMAC/XGMACS to SGMII/QSGMII/PSGMII/USXGMII/10G-BASER etc, there
+ are maximu 3 UNIPHY(PCS) instances supported by PPE.
+
+properties:
+ compatible:
+ enum:
+ - qcom,ipq5332-ppe
+ - qcom,ipq9574-ppe
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+
+ clocks: true
+
+ clock-names: true
+
+ resets: true
+
+ reset-names: true
+
+ tdm-config:
+ type: object
+ additionalProperties: false
+ description: |
+ PPE TDM(time-division multiplexing) config includes buffer management
+ and port scheduler.
+
+ properties:
+ qcom,tdm-bm-config:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ The TDM buffer scheduler configs of PPE, there are multiple
+ entries supported, each entry includes valid, direction
+ (ingress or egress), port, second port valid, second port.
+
+ qcom,tdm-port-scheduler-config:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ The TDM port scheduler management configs of PPE, there
+ are multiple entries supported each entry includes ingress
+ scheduler port bitmap, ingress scheduler port, egress
+ scheduler port, second egress scheduler port valid and
+ second egress scheduler port.
+
+ required:
+ - qcom,tdm-bm-config
+ - qcom,tdm-port-scheduler-config
+
+ buffer-management-config:
+ type: object
+ additionalProperties: false
+ description: |
+ PPE buffer management config, which supports configuring group
+ buffer and per port buffer, which decides the threshold of the
+ flow control frame generated.
+
+ properties:
+ qcom,group-config:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ The PPE buffer support 4 groups, the entry includes
+ the group ID and group buffer numbers, each buffer
+ has 256 bytes.
+
+ qcom,port-config:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ The PPE buffer number is also assigned per BM port ID,
+ there are 10 BM ports supported on ipq5332, and 15 BM
+ ports supported on ipq9574. Each entry includs group
+ ID, BM port ID, dedicated buffer, the buffer numbers
+ for receiving packet after pause frame sent, the
+ threshold for pause frame, weight, restore ceil and
+ dynamic buffer or static buffer management.
+
+ required:
+ - qcom,group-config
+ - qcom,port-config
+
+ queue-management-config:
+ type: object
+ additionalProperties: false
+ description: |
+ PPE queue management config, which supports configuring group
+ and per queue buffer limitation, which decides the threshold
+ to drop the packet on the egress port.
+
+ properties:
+ qcom,group-config:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ The PPE queue management support 4 groups, the entry
+ includes the group ID, group buffer number, dedicated
+ buffer number, threshold to drop packet and restore
+ ceil.
+
+ qcom,queue-config:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ PPE has 256 unicast queues and 44 multicast queues, the
+ entry includes queue base, queue number, group ID,
+ dedicated buffer, the threshold to drop packet, weight,
+ restore ceil and dynamic or static queue management.
+
+ required:
+ - qcom,group-config
+ - qcom,queue-config
+
+ port-scheduler-resource:
+ type: object
+ additionalProperties: false
+ description: The scheduler resource available in PPE.
+ patternProperties:
+ "^port[0-7]$":
+ description: Each subnode represents the scheduler resource per port.
+ type: object
+ properties:
+ port-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ The PPE port ID, there are maximum 6 physical port,
+ EIP port and CPU port.
+
+ qcom,ucast-queue:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+ description: The PPE unicast queue range.
+
+ qcom,mcast-queue:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+ description: The PPE multicast queue range.
+
+ qcom,l0sp:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+ description: The PPE L0 strict priority scheduler range.
+
+ qcom,l0cdrr:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+ description: The PPE L0 promise DRR range.
+
+ qcom,l0edrr:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+ description: The PPE L0 exceed DRR range.
+
+ qcom,l1cdrr:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+ description: The PPE L1 promise DRR range.
+
+ qcom,l1edrr:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+ description: The PPE L1 exceed DRR range.
+
+ required:
+ - port-id
+ - qcom,ucast-queue
+ - qcom,mcast-queue
+ - qcom,l0sp
+ - qcom,l0cdrr
+ - qcom,l0edrr
+ - qcom,l1cdrr
+ - qcom,l1edrr
+
+ port-scheduler-config:
+ type: object
+ additionalProperties: false
+ description: The scheduler resource config in PPE.
+ patternProperties:
+ "^port[0-7]$":
+ type: object
+ additionalProperties: false
+ description: Each subnode represents the scheduler config per port.
+ properties:
+ port-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ The PPE port ID, there are maximum 6 physical port
+ and one CPU port.
+
+ l1scheduler:
+ type: object
+ additionalProperties: false
+ description: PPE port level 1 scheduler config
+ patternProperties:
+ "^group[0-7]$":
+ type: object
+ additionalProperties: false
+ description: PPE per flow scheduler config in level 1
+ properties:
+ qcom,flow:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The flow ID for level 1 scheduler
+
+ qcom,flow-loop-priority:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The flow loop priority for level 1 scheduler
+
+ qcom,scheduler-config:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 5
+ maxItems: 5
+ description: |
+ The scheduler config includes flow ID, promise priority,
+ promise DRR, exceed priority and exceed DRR.
+
+ required:
+ - qcom,flow
+ - qcom,scheduler-config
+
+ l0scheduler:
+ type: object
+ additionalProperties: false
+ description: PPE port level 0 scheduler config
+ patternProperties:
+ "^group[0-7]$":
+ type: object
+ additionalProperties: false
+ description: PPE per flow scheduler config in level 0
+ properties:
+ qcom,ucast-queue:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The unicast queue base ID.
+
+ qcom,mcast-queue:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The multicast queue base ID.
+
+ qcom,ucast-loop-priority:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ The unicast priority number, each priority has dedicated
+ queue.
+
+ qcom,mcast-loop-priority:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ The multicast priority number, each priority has dedicated
+ queue.
+
+ qcom,drr-max-priority:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The unicast maximum priority for the configured queues
+
+ qcom,scheduler-config:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 5
+ maxItems: 5
+ description:
+ The flow ID input to level 1 scheduler, promise priority,
+ promise DRR, exceed priority and exceed DRR.
+
+ required:
+ - qcom,ucast-queue
+ - qcom,mcast-queue
+ - qcom,scheduler-config
+
+ required:
+ - port-id
+ - l0scheduler
+ - l1scheduler
+
+patternProperties:
+ "^qcom-uniphy@[0-9a-f]+$":
+ type: object
+ additionalProperties: false
+ description: uniphy configuration and clock provider
+ properties:
+ reg:
+ minItems: 2
+ items:
+ - description: The first uniphy register range
+ - description: The second uniphy register range
+ - description: The third uniphy register range
+
+ "#clock-cells":
+ const: 1
+
+ clock-output-names:
+ minItems: 4
+ maxItems: 6
+
+ required:
+ - reg
+ - "#clock-cells"
+ - clock-output-names
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,ipq5332-ppe
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Display common AHB clock from gcc
+ - description: Display common system clock from gcc
+ - description: Display uniphy0 AHB clock from gcc
+ - description: Display uniphy1 AHB clock from gcc
+ - description: Display uniphy0 system clock from gcc
+ - description: Display uniphy1 system clock from gcc
+ - description: Display nss clock from gcc
+ - description: Display nss noc snoc clock from gcc
+ - description: Display nss noc snoc_1 clock from gcc
+ - description: Display sleep clock from gcc
+ - description: Display PPE clock from nsscc
+ - description: Display PPE config clock from nsscc
+ - description: Display NSSNOC PPE clock from nsscc
+ - description: Display NSSNOC PPE config clock from nsscc
+ - description: Display EDMA clock from nsscc
+ - description: Display EDMA config clock from nsscc
+ - description: Display PPE IPE clock from nsscc
+ - description: Display PPE BTQ clock from nsscc
+ - description: Display port1 MAC clock from nsscc
+ - description: Display port2 MAC clock from nsscc
+ - description: Display port1 RX clock from nsscc
+ - description: Display port1 TX clock from nsscc
+ - description: Display port2 RX clock from nsscc
+ - description: Display port2 TX clock from nsscc
+ - description: Display UNIPHY port1 RX clock from nsscc
+ - description: Display UNIPHY port1 TX clock from nsscc
+ - description: Display UNIPHY port2 RX clock from nsscc
+ - description: Display UNIPHY port2 TX clock from nsscc
+ clock-names:
+ items:
+ - const: cmn_ahb
+ - const: cmn_sys
+ - const: uniphy0_ahb
+ - const: uniphy1_ahb
+ - const: uniphy0_sys
+ - const: uniphy1_sys
+ - const: gcc_nsscc
+ - const: gcc_nssnoc_snoc
+ - const: gcc_nssnoc_snoc_1
+ - const: gcc_im_sleep
+ - const: nss_ppe
+ - const: nss_ppe_cfg
+ - const: nssnoc_ppe
+ - const: nssnoc_ppe_cfg
+ - const: nss_edma
+ - const: nss_edma_cfg
+ - const: nss_ppe_ipe
+ - const: nss_ppe_btq
+ - const: port1_mac
+ - const: port2_mac
+ - const: nss_port1_rx
+ - const: nss_port1_tx
+ - const: nss_port2_rx
+ - const: nss_port2_tx
+ - const: uniphy_port1_rx
+ - const: uniphy_port1_tx
+ - const: uniphy_port2_rx
+ - const: uniphy_port2_tx
+
+ resets:
+ items:
+ - description: Reset PPE
+ - description: Reset uniphy0 software config
+ - description: Reset uniphy1 software config
+ - description: Reset uniphy0 AHB
+ - description: Reset uniphy1 AHB
+ - description: Reset uniphy0 system
+ - description: Reset uniphy1 system
+ - description: Reset uniphy0 XPCS
+ - description: Reset uniphy1 SPCS
+ - description: Reset uniphy port1 RX
+ - description: Reset uniphy port1 TX
+ - description: Reset uniphy port2 RX
+ - description: Reset uniphy port2 TX
+ - description: Reset PPE port1 RX
+ - description: Reset PPE port1 TX
+ - description: Reset PPE port2 RX
+ - description: Reset PPE port2 TX
+ - description: Reset PPE port1 MAC
+ - description: Reset PPE port2 MAC
+
+ reset-names:
+ items:
+ - const: ppe
+ - const: uniphy0_soft
+ - const: uniphy1_soft
+ - const: uniphy0_ahb
+ - const: uniphy1_ahb
+ - const: uniphy0_sys
+ - const: uniphy1_sys
+ - const: uniphy0_xpcs
+ - const: uniphy1_xpcs
+ - const: uniphy_port1_rx
+ - const: uniphy_port1_tx
+ - const: uniphy_port2_rx
+ - const: uniphy_port2_tx
+ - const: nss_port1_rx
+ - const: nss_port1_tx
+ - const: nss_port2_rx
+ - const: nss_port2_tx
+ - const: nss_port1_mac
+ - const: nss_port2_mac
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,ipq9574-ppe
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Display common AHB clock from gcc
+ - description: Display common system clock from gcc
+ - description: Display uniphy0 AHB clock from gcc
+ - description: Display uniphy1 AHB clock from gcc
+ - description: Display uniphy2 AHB clock from gcc
+ - description: Display uniphy0 system clock from gcc
+ - description: Display uniphy1 system clock from gcc
+ - description: Display uniphy2 system clock from gcc
+ - description: Display nss clock from gcc
+ - description: Display nss noc clock from gcc
+ - description: Display nss noc snoc clock from gcc
+ - description: Display nss noc snoc_1 clock from gcc
+ - description: Display PPE clock from nsscc
+ - description: Display PPE config clock from nsscc
+ - description: Display NSSNOC PPE clock from nsscc
+ - description: Display NSSNOC PPE config clock from nsscc
+ - description: Display EDMA clock from nsscc
+ - description: Display EDMA config clock from nsscc
+ - description: Display PPE IPE clock from nsscc
+ - description: Display PPE BTQ clock from nsscc
+ - description: Display port1 MAC clock from nsscc
+ - description: Display port2 MAC clock from nsscc
+ - description: Display port3 MAC clock from nsscc
+ - description: Display port4 MAC clock from nsscc
+ - description: Display port5 MAC clock from nsscc
+ - description: Display port6 MAC clock from nsscc
+ - description: Display port1 RX clock from nsscc
+ - description: Display port1 TX clock from nsscc
+ - description: Display port2 RX clock from nsscc
+ - description: Display port2 TX clock from nsscc
+ - description: Display port3 RX clock from nsscc
+ - description: Display port3 TX clock from nsscc
+ - description: Display port4 RX clock from nsscc
+ - description: Display port4 TX clock from nsscc
+ - description: Display port5 RX clock from nsscc
+ - description: Display port5 TX clock from nsscc
+ - description: Display port6 RX clock from nsscc
+ - description: Display port6 TX clock from nsscc
+ - description: Display UNIPHY port1 RX clock from nsscc
+ - description: Display UNIPHY port1 TX clock from nsscc
+ - description: Display UNIPHY port2 RX clock from nsscc
+ - description: Display UNIPHY port2 TX clock from nsscc
+ - description: Display UNIPHY port3 RX clock from nsscc
+ - description: Display UNIPHY port3 TX clock from nsscc
+ - description: Display UNIPHY port4 RX clock from nsscc
+ - description: Display UNIPHY port4 TX clock from nsscc
+ - description: Display UNIPHY port5 RX clock from nsscc
+ - description: Display UNIPHY port5 TX clock from nsscc
+ - description: Display UNIPHY port6 RX clock from nsscc
+ - description: Display UNIPHY port6 TX clock from nsscc
+ - description: Display port5 RX clock source from nsscc
+ - description: Display port5 TX clock source from nsscc
+ clock-names:
+ items:
+ - const: cmn_ahb
+ - const: cmn_sys
+ - const: uniphy0_ahb
+ - const: uniphy1_ahb
+ - const: uniphy2_ahb
+ - const: uniphy0_sys
+ - const: uniphy1_sys
+ - const: uniphy2_sys
+ - const: gcc_nsscc
+ - const: gcc_nssnoc_nsscc
+ - const: gcc_nssnoc_snoc
+ - const: gcc_nssnoc_snoc_1
+ - const: nss_ppe
+ - const: nss_ppe_cfg
+ - const: nssnoc_ppe
+ - const: nssnoc_ppe_cfg
+ - const: nss_edma
+ - const: nss_edma_cfg
+ - const: nss_ppe_ipe
+ - const: nss_ppe_btq
+ - const: port1_mac
+ - const: port2_mac
+ - const: port3_mac
+ - const: port4_mac
+ - const: port5_mac
+ - const: port6_mac
+ - const: nss_port1_rx
+ - const: nss_port1_tx
+ - const: nss_port2_rx
+ - const: nss_port2_tx
+ - const: nss_port3_rx
+ - const: nss_port3_tx
+ - const: nss_port4_rx
+ - const: nss_port4_tx
+ - const: nss_port5_rx
+ - const: nss_port5_tx
+ - const: nss_port6_rx
+ - const: nss_port6_tx
+ - const: uniphy_port1_rx
+ - const: uniphy_port1_tx
+ - const: uniphy_port2_rx
+ - const: uniphy_port2_tx
+ - const: uniphy_port3_rx
+ - const: uniphy_port3_tx
+ - const: uniphy_port4_rx
+ - const: uniphy_port4_tx
+ - const: uniphy_port5_rx
+ - const: uniphy_port5_tx
+ - const: uniphy_port6_rx
+ - const: uniphy_port6_tx
+ - const: nss_port5_rx_clk_src
+ - const: nss_port5_tx_clk_src
+
+ resets:
+ items:
+ - description: Reset PPE
+ - description: Reset uniphy0 software config
+ - description: Reset uniphy1 software config
+ - description: Reset uniphy2 software config
+ - description: Reset uniphy0 AHB
+ - description: Reset uniphy1 AHB
+ - description: Reset uniphy2 AHB
+ - description: Reset uniphy0 system
+ - description: Reset uniphy1 system
+ - description: Reset uniphy2 system
+ - description: Reset uniphy0 XPCS
+ - description: Reset uniphy1 XPCS
+ - description: Reset uniphy2 XPCS
+ - description: Assert uniphy port1
+ - description: Assert uniphy port2
+ - description: Assert uniphy port3
+ - description: Assert uniphy port4
+ - description: Reset PPE port1
+ - description: Reset PPE port2
+ - description: Reset PPE port3
+ - description: Reset PPE port4
+ - description: Reset PPE port5
+ - description: Reset PPE port6
+ - description: Reset PPE port1 MAC
+ - description: Reset PPE port2 MAC
+ - description: Reset PPE port3 MAC
+ - description: Reset PPE port4 MAC
+ - description: Reset PPE port5 MAC
+ - description: Reset PPE port6 MAC
+
+ reset-names:
+ items:
+ - const: ppe
+ - const: uniphy0_soft
+ - const: uniphy1_soft
+ - const: uniphy2_soft
+ - const: uniphy0_ahb
+ - const: uniphy1_ahb
+ - const: uniphy2_ahb
+ - const: uniphy0_sys
+ - const: uniphy1_sys
+ - const: uniphy2_sys
+ - const: uniphy0_xpcs
+ - const: uniphy1_xpcs
+ - const: uniphy2_xpcs
+ - const: uniphy0_port1_dis
+ - const: uniphy0_port2_dis
+ - const: uniphy0_port3_dis
+ - const: uniphy0_port4_dis
+ - const: nss_port1
+ - const: nss_port2
+ - const: nss_port3
+ - const: nss_port4
+ - const: nss_port5
+ - const: nss_port6
+ - const: nss_port1_mac
+ - const: nss_port2_mac
+ - const: nss_port3_mac
+ - const: nss_port4_mac
+ - const: nss_port5_mac
+ - const: nss_port6_mac
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - tdm-config
+ - buffer-management-config
+ - queue-management-config
+ - port-scheduler-resource
+ - port-scheduler-config
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
+ #include <dt-bindings/reset/qcom,ipq9574-gcc.h>
+ #include <dt-bindings/clock/qcom,ipq9574-nsscc.h>
+ #include <dt-bindings/reset/qcom,ipq9574-nsscc.h>
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ qcom_ppe: qcom-ppe at 3a000000 {
+ compatible = "qcom,ipq9574-ppe";
+ reg = <0x3a000000 0xb00000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&gcc GCC_CMN_12GPLL_AHB_CLK>,
+ <&gcc GCC_CMN_12GPLL_SYS_CLK>,
+ <&gcc GCC_UNIPHY0_AHB_CLK>,
+ <&gcc GCC_UNIPHY1_AHB_CLK>,
+ <&gcc GCC_UNIPHY2_AHB_CLK>,
+ <&gcc GCC_UNIPHY0_SYS_CLK>,
+ <&gcc GCC_UNIPHY1_SYS_CLK>,
+ <&gcc GCC_UNIPHY2_SYS_CLK>,
+ <&gcc GCC_NSSCC_CLK>,
+ <&gcc GCC_NSSNOC_NSSCC_CLK>,
+ <&gcc GCC_NSSNOC_SNOC_CLK>,
+ <&gcc GCC_NSSNOC_SNOC_1_CLK>,
+ <&nsscc NSS_CC_PPE_SWITCH_CLK>,
+ <&nsscc NSS_CC_PPE_SWITCH_CFG_CLK>,
+ <&nsscc NSS_CC_NSSNOC_PPE_CLK>,
+ <&nsscc NSS_CC_NSSNOC_PPE_CFG_CLK>,
+ <&nsscc NSS_CC_PPE_EDMA_CLK>,
+ <&nsscc NSS_CC_PPE_EDMA_CFG_CLK>,
+ <&nsscc NSS_CC_PPE_SWITCH_IPE_CLK>,
+ <&nsscc NSS_CC_PPE_SWITCH_BTQ_CLK>,
+ <&nsscc NSS_CC_PORT1_MAC_CLK>,
+ <&nsscc NSS_CC_PORT2_MAC_CLK>,
+ <&nsscc NSS_CC_PORT3_MAC_CLK>,
+ <&nsscc NSS_CC_PORT4_MAC_CLK>,
+ <&nsscc NSS_CC_PORT5_MAC_CLK>,
+ <&nsscc NSS_CC_PORT6_MAC_CLK>,
+ <&nsscc NSS_CC_PORT1_RX_CLK>,
+ <&nsscc NSS_CC_PORT1_TX_CLK>,
+ <&nsscc NSS_CC_PORT2_RX_CLK>,
+ <&nsscc NSS_CC_PORT2_TX_CLK>,
+ <&nsscc NSS_CC_PORT3_RX_CLK>,
+ <&nsscc NSS_CC_PORT3_TX_CLK>,
+ <&nsscc NSS_CC_PORT4_RX_CLK>,
+ <&nsscc NSS_CC_PORT4_TX_CLK>,
+ <&nsscc NSS_CC_PORT5_RX_CLK>,
+ <&nsscc NSS_CC_PORT5_TX_CLK>,
+ <&nsscc NSS_CC_PORT6_RX_CLK>,
+ <&nsscc NSS_CC_PORT6_TX_CLK>,
+ <&nsscc NSS_CC_UNIPHY_PORT1_RX_CLK>,
+ <&nsscc NSS_CC_UNIPHY_PORT1_TX_CLK>,
+ <&nsscc NSS_CC_UNIPHY_PORT2_RX_CLK>,
+ <&nsscc NSS_CC_UNIPHY_PORT2_TX_CLK>,
+ <&nsscc NSS_CC_UNIPHY_PORT3_RX_CLK>,
+ <&nsscc NSS_CC_UNIPHY_PORT3_TX_CLK>,
+ <&nsscc NSS_CC_UNIPHY_PORT4_RX_CLK>,
+ <&nsscc NSS_CC_UNIPHY_PORT4_TX_CLK>,
+ <&nsscc NSS_CC_UNIPHY_PORT5_RX_CLK>,
+ <&nsscc NSS_CC_UNIPHY_PORT5_TX_CLK>,
+ <&nsscc NSS_CC_UNIPHY_PORT6_RX_CLK>,
+ <&nsscc NSS_CC_UNIPHY_PORT6_TX_CLK>,
+ <&nsscc NSS_CC_PORT5_RX_CLK_SRC>,
+ <&nsscc NSS_CC_PORT5_TX_CLK_SRC>;
+ clock-names = "cmn_ahb",
+ "cmn_sys",
+ "uniphy0_ahb",
+ "uniphy1_ahb",
+ "uniphy2_ahb",
+ "uniphy0_sys",
+ "uniphy1_sys",
+ "uniphy2_sys",
+ "gcc_nsscc",
+ "gcc_nssnoc_nsscc",
+ "gcc_nssnoc_snoc",
+ "gcc_nssnoc_snoc_1",
+ "nss_ppe",
+ "nss_ppe_cfg",
+ "nssnoc_ppe",
+ "nssnoc_ppe_cfg",
+ "nss_edma",
+ "nss_edma_cfg",
+ "nss_ppe_ipe",
+ "nss_ppe_btq",
+ "port1_mac",
+ "port2_mac",
+ "port3_mac",
+ "port4_mac",
+ "port5_mac",
+ "port6_mac",
+ "nss_port1_rx",
+ "nss_port1_tx",
+ "nss_port2_rx",
+ "nss_port2_tx",
+ "nss_port3_rx",
+ "nss_port3_tx",
+ "nss_port4_rx",
+ "nss_port4_tx",
+ "nss_port5_rx",
+ "nss_port5_tx",
+ "nss_port6_rx",
+ "nss_port6_tx",
+ "uniphy_port1_rx",
+ "uniphy_port1_tx",
+ "uniphy_port2_rx",
+ "uniphy_port2_tx",
+ "uniphy_port3_rx",
+ "uniphy_port3_tx",
+ "uniphy_port4_rx",
+ "uniphy_port4_tx",
+ "uniphy_port5_rx",
+ "uniphy_port5_tx",
+ "uniphy_port6_rx",
+ "uniphy_port6_tx",
+ "nss_port5_rx_clk_src",
+ "nss_port5_tx_clk_src";
+ resets = <&nsscc PPE_FULL_RESET>,
+ <&nsscc UNIPHY0_SOFT_RESET>,
+ <&nsscc UNIPHY_PORT5_ARES>,
+ <&nsscc UNIPHY_PORT6_ARES>,
+ <&gcc GCC_UNIPHY0_AHB_RESET>,
+ <&gcc GCC_UNIPHY1_AHB_RESET>,
+ <&gcc GCC_UNIPHY2_AHB_RESET>,
+ <&gcc GCC_UNIPHY0_SYS_RESET>,
+ <&gcc GCC_UNIPHY1_SYS_RESET>,
+ <&gcc GCC_UNIPHY2_SYS_RESET>,
+ <&gcc GCC_UNIPHY0_XPCS_RESET>,
+ <&gcc GCC_UNIPHY1_XPCS_RESET>,
+ <&gcc GCC_UNIPHY2_XPCS_RESET>,
+ <&nsscc UNIPHY_PORT1_ARES>,
+ <&nsscc UNIPHY_PORT2_ARES>,
+ <&nsscc UNIPHY_PORT3_ARES>,
+ <&nsscc UNIPHY_PORT4_ARES>,
+ <&nsscc NSSPORT1_RESET>,
+ <&nsscc NSSPORT2_RESET>,
+ <&nsscc NSSPORT3_RESET>,
+ <&nsscc NSSPORT4_RESET>,
+ <&nsscc NSSPORT5_RESET>,
+ <&nsscc NSSPORT6_RESET>,
+ <&nsscc PORT1_MAC_ARES>,
+ <&nsscc PORT2_MAC_ARES>,
+ <&nsscc PORT3_MAC_ARES>,
+ <&nsscc PORT4_MAC_ARES>,
+ <&nsscc PORT5_MAC_ARES>,
+ <&nsscc PORT6_MAC_ARES>;
+ reset-names = "ppe",
+ "uniphy0_soft",
+ "uniphy1_soft",
+ "uniphy2_soft",
+ "uniphy0_ahb",
+ "uniphy1_ahb",
+ "uniphy2_ahb",
+ "uniphy0_sys",
+ "uniphy1_sys",
+ "uniphy2_sys",
+ "uniphy0_xpcs",
+ "uniphy1_xpcs",
+ "uniphy2_xpcs",
+ "uniphy0_port1_dis",
+ "uniphy0_port2_dis",
+ "uniphy0_port3_dis",
+ "uniphy0_port4_dis",
+ "nss_port1",
+ "nss_port2",
+ "nss_port3",
+ "nss_port4",
+ "nss_port5",
+ "nss_port6",
+ "nss_port1_mac",
+ "nss_port2_mac",
+ "nss_port3_mac",
+ "nss_port4_mac",
+ "nss_port5_mac",
+ "nss_port6_mac";
+
+ uniphys: qcom-uniphy at 7a00000 {
+ reg = <0x7a00000 0x10000>,
+ <0x7a10000 0x10000>,
+ <0x7a20000 0x10000>;
+ #clock-cells = <0x1>;
+ clock-output-names = "uniphy0_gcc_rx_clk",
+ "uniphy0_gcc_tx_clk",
+ "uniphy1_gcc_rx_clk",
+ "uniphy1_gcc_tx_clk",
+ "uniphy2_gcc_rx_clk",
+ "uniphy2_gcc_tx_clk";
+ };
+
+ tdm-config {
+ qcom,tdm-bm-config = <1 0 0 0 0>,
+ <1 1 0 0 0>,
+ <1 0 5 0 0>,
+ <1 1 5 0 0>,
+ <1 0 6 0 0>,
+ <1 1 6 0 0>,
+ <1 0 1 0 0>,
+ <1 1 1 0 0>,
+ <1 0 0 0 0>,
+ <1 1 0 0 0>,
+ <1 0 5 0 0>,
+ <1 1 5 0 0>,
+ <1 0 6 0 0>,
+ <1 1 6 0 0>,
+ <1 0 7 0 0>,
+ <1 1 7 0 0>,
+ <1 0 0 0 0>,
+ <1 1 0 0 0>,
+ <1 0 1 0 0>,
+ <1 1 1 0 0>,
+ <1 0 5 0 0>,
+ <1 1 5 0 0>,
+ <1 0 6 0 0>,
+ <1 1 6 0 0>,
+ <1 0 2 0 0>,
+ <1 1 2 0 0>,
+ <1 0 0 0 0>,
+ <1 1 0 0 0>,
+ <1 0 5 0 0>,
+ <1 1 5 0 0>,
+ <1 0 6 0 0>,
+ <1 1 6 0 0>,
+ <1 0 1 0 0>,
+ <1 1 1 0 0>,
+ <1 0 3 0 0>,
+ <1 1 3 0 0>,
+ <1 0 0 0 0>,
+ <1 1 0 0 0>,
+ <1 0 5 0 0>,
+ <1 1 5 0 0>,
+ <1 0 6 0 0>,
+ <1 1 6 0 0>,
+ <1 0 7 0 0>,
+ <1 1 7 0 0>,
+ <1 0 0 0 0>,
+ <1 1 0 0 0>,
+ <1 0 1 0 0>,
+ <1 1 1 0 0>,
+ <1 0 5 0 0>,
+ <1 1 5 0 0>,
+ <1 0 6 0 0>,
+ <1 1 6 0 0>,
+ <1 0 4 0 0>,
+ <1 1 4 0 0>,
+ <1 0 0 0 0>,
+ <1 1 0 0 0>,
+ <1 0 5 0 0>,
+ <1 1 5 0 0>,
+ <1 0 6 0 0>,
+ <1 1 6 0 0>,
+ <1 0 1 0 0>,
+ <1 1 1 0 0>,
+ <1 0 0 0 0>,
+ <1 1 0 0 0>,
+ <1 0 5 0 0>,
+ <1 1 5 0 0>,
+ <1 0 6 0 0>,
+ <1 1 6 0 0>,
+ <1 0 2 0 0>,
+ <1 1 2 0 0>,
+ <1 0 0 0 0>,
+ <1 1 0 0 0>,
+ <1 0 7 0 0>,
+ <1 1 7 0 0>,
+ <1 0 5 0 0>,
+ <1 1 5 0 0>,
+ <1 0 6 0 0>,
+ <1 1 6 0 0>,
+ <1 0 1 0 0>,
+ <1 1 1 0 0>,
+ <1 0 0 0 0>,
+ <1 1 0 0 0>,
+ <1 0 5 0 0>,
+ <1 1 5 0 0>,
+ <1 0 6 0 0>,
+ <1 1 6 0 0>,
+ <1 0 3 0 0>,
+ <1 1 3 0 0>,
+ <1 0 1 0 0>,
+ <1 1 1 0 0>,
+ <1 0 0 0 0>,
+ <1 1 0 0 0>,
+ <1 0 5 0 0>,
+ <1 1 5 0 0>,
+ <1 0 6 0 0>,
+ <1 1 6 0 0>,
+ <1 0 4 0 0>,
+ <1 1 4 0 0>,
+ <1 0 7 0 0>,
+ <1 1 7 0 0>;
+ qcom,tdm-port-scheduler-config = <0x98 6 0 1 1>,
+ <0x94 5 6 1 3>,
+ <0x86 0 5 1 4>,
+ <0x8C 1 6 1 0>,
+ <0x1C 7 5 1 1>,
+ <0x98 2 6 1 0>,
+ <0x1C 5 7 1 1>,
+ <0x34 3 6 1 0>,
+ <0x8C 4 5 1 1>,
+ <0x98 2 6 1 0>,
+ <0x8C 5 4 1 1>,
+ <0xA8 0 6 1 2>,
+ <0x98 5 1 1 0>,
+ <0x98 6 5 1 2>,
+ <0x89 1 6 1 4>,
+ <0xA4 3 0 1 1>,
+ <0x8C 5 6 1 4>,
+ <0xA8 0 2 1 1>,
+ <0x98 6 5 1 0>,
+ <0xC4 4 3 1 1>,
+ <0x94 6 5 1 0>,
+ <0x1C 7 6 1 1>,
+ <0x98 2 5 1 0>,
+ <0x1C 6 7 1 1>,
+ <0x1C 5 6 1 0>,
+ <0x94 3 5 1 1>,
+ <0x8C 4 6 1 0>,
+ <0x94 1 5 1 3>,
+ <0x94 6 1 1 0>,
+ <0xD0 3 5 1 2>,
+ <0x98 6 0 1 1>,
+ <0x94 5 6 1 3>,
+ <0x94 1 5 1 0>,
+ <0x98 2 6 1 1>,
+ <0x8C 4 5 1 0>,
+ <0x1C 7 6 1 1>,
+ <0x8C 0 5 1 4>,
+ <0x89 1 6 1 2>,
+ <0x98 5 0 1 1>,
+ <0x94 6 5 1 3>,
+ <0x92 0 6 1 2>,
+ <0x98 1 5 1 0>,
+ <0x98 6 2 1 1>,
+ <0xD0 0 5 1 3>,
+ <0x94 6 0 1 1>,
+ <0x8C 5 6 1 4>,
+ <0x8C 1 5 1 0>,
+ <0x1C 6 7 1 1>,
+ <0x1C 5 6 1 0>,
+ <0xB0 2 3 1 1>,
+ <0xC4 4 5 1 0>,
+ <0x8C 6 4 1 1>,
+ <0xA4 3 6 1 0>,
+ <0x1C 5 7 1 1>,
+ <0x4C 0 5 1 4>,
+ <0x8C 6 0 1 1>,
+ <0x34 7 6 1 3>,
+ <0x94 5 0 1 1>,
+ <0x98 6 5 1 2>;
+ };
+
+ buffer-management-config {
+ qcom,group-config = <0 1550>;
+ qcom,port-config = <0 0 0 100 1146 7 8 0 1>,
+ <0 1 0 100 250 4 36 0 1>,
+ <0 2 0 100 250 4 36 0 1>,
+ <0 3 0 100 250 4 36 0 1>,
+ <0 4 0 100 250 4 36 0 1>,
+ <0 5 0 100 250 4 36 0 1>,
+ <0 6 0 100 250 4 36 0 1>,
+ <0 7 0 100 250 4 36 0 1>,
+ <0 8 0 128 250 4 36 0 1>,
+ <0 9 0 128 250 4 36 0 1>,
+ <0 10 0 128 250 4 36 0 1>,
+ <0 11 0 128 250 4 36 0 1>,
+ <0 12 0 128 250 4 36 0 1>,
+ <0 13 0 128 250 4 36 0 1>,
+ <0 14 0 40 250 4 36 0 1>;
+ };
+
+ queue-management-config {
+ qcom,group-config = <0 2000 0 0 0>;
+ qcom,queue-config = <0 256 0 0 400 4 36 1>,
+ <256 44 0 0 250 0 36 0>;
+ };
+
+ port-scheduler-resource {
+ port0 {
+ port-id = <0>;
+ qcom,ucast-queue = <0 63>;
+ qcom,mcast-queue = <256 263>;
+ qcom,l0sp = <0 0>;
+ qcom,l0cdrr = <0 7>;
+ qcom,l0edrr = <0 7>;
+ qcom,l1cdrr = <0 0>;
+ qcom,l1edrr = <0 0>;
+ };
+
+ port1 {
+ port-id = <1>;
+ qcom,ucast-queue = <204 211>;
+ qcom,mcast-queue = <272 275>;
+ qcom,l0sp = <51 52>;
+ qcom,l0cdrr = <108 115>;
+ qcom,l0edrr = <108 115>;
+ qcom,l1cdrr = <23 24>;
+ qcom,l1edrr = <23 24>;
+ };
+
+ port2 {
+ port-id = <2>;
+ qcom,ucast-queue = <212 219>;
+ qcom,mcast-queue = <276 279>;
+ qcom,l0sp = <53 54>;
+ qcom,l0cdrr = <116 123>;
+ qcom,l0edrr = <116 123>;
+ qcom,l1cdrr = <25 26>;
+ qcom,l1edrr = <25 26>;
+ };
+
+ port3 {
+ port-id = <3>;
+ qcom,ucast-queue = <220 227>;
+ qcom,mcast-queue = <280 283>;
+ qcom,l0sp = <55 56>;
+ qcom,l0cdrr = <124 131>;
+ qcom,l0edrr = <124 131>;
+ qcom,l1cdrr = <27 28>;
+ qcom,l1edrr = <27 28>;
+ };
+
+ port4 {
+ port-id = <4>;
+ qcom,ucast-queue = <228 235>;
+ qcom,mcast-queue = <284 287>;
+ qcom,l0sp = <57 58>;
+ qcom,l0cdrr = <132 139>;
+ qcom,l0edrr = <132 139>;
+ qcom,l1cdrr = <29 30>;
+ qcom,l1edrr = <29 30>;
+ };
+
+ port5 {
+ port-id = <5>;
+ qcom,ucast-queue = <236 243>;
+ qcom,mcast-queue = <288 291>;
+ qcom,l0sp = <59 60>;
+ qcom,l0cdrr = <140 147>;
+ qcom,l0edrr = <140 147>;
+ qcom,l1cdrr = <31 32>;
+ qcom,l1edrr = <31 32>;
+ };
+
+ port6 {
+ port-id = <6>;
+ qcom,ucast-queue = <244 251>;
+ qcom,mcast-queue = <292 295>;
+ qcom,l0sp = <61 62>;
+ qcom,l0cdrr = <148 155>;
+ qcom,l0edrr = <148 155>;
+ qcom,l1cdrr = <33 34>;
+ qcom,l1edrr = <33 34>;
+ };
+
+ port7 {
+ port-id = <7>;
+ qcom,ucast-queue = <252 255>;
+ qcom,mcast-queue = <296 299>;
+ qcom,l0sp = <63 63>;
+ qcom,l0cdrr = <156 159>;
+ qcom,l0edrr = <156 159>;
+ qcom,l1cdrr = <35 35>;
+ qcom,l1edrr = <35 35>;
+ };
+ };
+
+ port-scheduler-config {
+ port0 {
+ port-id = <0>;
+ l1scheduler {
+ group0 {
+ qcom,flow = <0>;
+ qcom,scheduler-config = <0 0 0 0 0>;
+ };
+ };
+
+ l0scheduler {
+ group0 {
+ qcom,ucast-queue = <0>;
+ qcom,ucast-loop-priority = <8>;
+ qcom,mcast-queue = <256>;
+ qcom,scheduler-config = <0 0 0 0 0>;
+ };
+
+ group1 {
+ qcom,ucast-queue = <8>;
+ qcom,ucast-loop-priority = <8>;
+ qcom,mcast-queue = <257>;
+ qcom,scheduler-config = <0 0 0 0 0>;
+ };
+
+ group2 {
+ qcom,ucast-queue = <16>;
+ qcom,ucast-loop-priority = <8>;
+ qcom,mcast-queue = <258>;
+ qcom,scheduler-config = <0 0 0 0 0>;
+ };
+
+ group3 {
+ qcom,ucast-queue = <24>;
+ qcom,ucast-loop-priority = <8>;
+ qcom,mcast-queue = <259>;
+ qcom,scheduler-config = <0 0 0 0 0>;
+ };
+
+ group4 {
+ qcom,ucast-queue = <32>;
+ qcom,ucast-loop-priority = <8>;
+ qcom,mcast-queue = <260>;
+ qcom,scheduler-config = <0 0 0 0 0>;
+ };
+
+ group5 {
+ qcom,ucast-queue = <40>;
+ qcom,ucast-loop-priority = <8>;
+ qcom,mcast-queue = <261>;
+ qcom,scheduler-config = <0 0 0 0 0>;
+ };
+
+ group6 {
+ qcom,ucast-queue = <48>;
+ qcom,ucast-loop-priority = <8>;
+ qcom,mcast-queue = <262>;
+ qcom,scheduler-config = <0 0 0 0 0>;
+ };
+
+ group7 {
+ qcom,ucast-queue = <56>;
+ qcom,ucast-loop-priority = <8>;
+ qcom,mcast-queue = <263>;
+ qcom,scheduler-config = <0 0 0 0 0>;
+ };
+ };
+ };
+
+ port1 {
+ port-id = <1>;
+ l1scheduler {
+ group0 {
+ qcom,flow = <51>;
+ qcom,flow-loop-priority = <2>;
+ qcom,scheduler-config = <1 0 23 0 23>;
+ };
+ };
+
+ l0scheduler {
+ group0 {
+ qcom,ucast-queue = <204>;
+ qcom,ucast-loop-priority = <8>;
+ qcom,drr-max-priority = <4>;
+ qcom,mcast-queue = <272>;
+ qcom,mcast-loop-priority = <4>;
+ qcom,scheduler-config = <51 0 108 0 108>;
+ };
+ };
+ };
+
+ port2 {
+ port-id = <2>;
+ l1scheduler {
+ group0 {
+ qcom,flow = <53>;
+ qcom,flow-loop-priority = <2>;
+ qcom,scheduler-config = <2 0 25 0 25>;
+ };
+ };
+
+ l0scheduler {
+ group0 {
+ qcom,ucast-queue = <212>;
+ qcom,ucast-loop-priority = <8>;
+ qcom,drr-max-priority = <4>;
+ qcom,mcast-queue = <276>;
+ qcom,mcast-loop-priority = <4>;
+ qcom,scheduler-config = <53 0 116 0 116>;
+ };
+ };
+ };
+
+ port3 {
+ port-id = <3>;
+ l1scheduler {
+ group0 {
+ qcom,flow = <55>;
+ qcom,flow-loop-priority = <2>;
+ qcom,scheduler-config = <3 0 27 0 27>;
+ };
+ };
+
+ l0scheduler {
+ group0 {
+ qcom,ucast-queue = <220>;
+ qcom,ucast-loop-priority = <8>;
+ qcom,drr-max-priority = <4>;
+ qcom,mcast-queue = <280>;
+ qcom,mcast-loop-priority = <4>;
+ qcom,scheduler-config = <55 0 124 0 124>;
+ };
+ };
+ };
+
+ port4 {
+ port-id = <4>;
+ l1scheduler {
+ group0 {
+ qcom,flow = <57>;
+ qcom,flow-loop-priority = <2>;
+ qcom,scheduler-config = <4 0 29 0 29>;
+ };
+ };
+
+ l0scheduler {
+ group0 {
+ qcom,ucast-queue = <228>;
+ qcom,ucast-loop-priority = <8>;
+ qcom,drr-max-priority = <4>;
+ qcom,mcast-queue = <284>;
+ qcom,mcast-loop-priority = <4>;
+ qcom,scheduler-config = <57 0 132 0 132>;
+ };
+ };
+ };
+
+ port5 {
+ port-id = <5>;
+ l1scheduler {
+ group0 {
+ qcom,flow = <59>;
+ qcom,flow-loop-priority = <2>;
+ qcom,scheduler-config = <5 0 31 0 31>;
+ };
+ };
+
+ l0scheduler {
+ group0 {
+ qcom,ucast-queue = <236>;
+ qcom,ucast-loop-priority = <8>;
+ qcom,drr-max-priority = <4>;
+ qcom,mcast-queue = <288>;
+ qcom,mcast-loop-priority = <4>;
+ qcom,scheduler-config = <59 0 140 0 140>;
+ };
+ };
+ };
+
+ port6 {
+ port-id = <6>;
+ l1scheduler {
+ group0 {
+ qcom,flow = <61>;
+ qcom,flow-loop-priority = <2>;
+ qcom,scheduler-config = <6 0 33 0 33>;
+ };
+ };
+
+ l0scheduler {
+ group0 {
+ qcom,ucast-queue = <244>;
+ qcom,ucast-loop-priority = <8>;
+ qcom,drr-max-priority = <4>;
+ qcom,mcast-queue = <292>;
+ qcom,mcast-loop-priority = <4>;
+ qcom,scheduler-config = <61 0 148 0 148>;
+ };
+ };
+ };
+
+ port7 {
+ port-id = <7>;
+ l1scheduler {
+ group0 {
+ qcom,flow = <63>;
+ qcom,scheduler-config = <7 0 35 0 35>;
+ };
+ };
+
+ l0scheduler {
+ group0 {
+ qcom,ucast-queue = <252>;
+ qcom,ucast-loop-priority = <4>;
+ qcom,mcast-queue = <296>;
+ qcom,mcast-loop-priority = <4>;
+ qcom,scheduler-config = <63 0 156 0 156>;
+ };
+ };
+ };
+ };
+ };
+ };
--
2.42.0
More information about the linux-arm-kernel
mailing list