[PATCH net-next v2 4/4] net: stmmac: Use interrupt mode INTM=1 for per channel irq

Swee, Leong Ching leong.ching.swee at intel.com
Tue Jan 9 21:43:26 PST 2024


> -----Original Message-----
> From: Serge Semin <fancer.lancer at gmail.com>
> Sent: Monday, January 8, 2024 4:52 AM
> To: Swee, Leong Ching <leong.ching.swee at intel.com>
> Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>; Alexandre Torgue
> <alexandre.torgue at foss.st.com>; Jose Abreu <joabreu at synopsys.com>;
> David S . Miller <davem at davemloft.net>; Eric Dumazet
> <edumazet at google.com>; Jakub Kicinski <kuba at kernel.org>; Paolo Abeni
> <pabeni at redhat.com>; Rob Herring <robh+dt at kernel.org>; Krzysztof
> Kozlowski <krzysztof.kozlowski+dt at linaro.org>; Conor Dooley
> <conor+dt at kernel.org>; Giuseppe Cavallaro <peppe.cavallaro at st.com>;
> linux-stm32 at st-md-mailman.stormreply.com; linux-arm-
> kernel at lists.infradead.org; linux-kernel at vger.kernel.org;
> netdev at vger.kernel.org; devicetree at vger.kernel.org; Teoh Ji Sheng
> <ji.sheng.teoh at intel.com>
> Subject: Re: [PATCH net-next v2 4/4] net: stmmac: Use interrupt mode
> INTM=1 for per channel irq
> 
> On Fri, Jan 05, 2024 at 03:09:25PM +0800, Leong Ching Swee wrote:
> > From: Swee Leong Ching <leong.ching.swee at intel.com>
> >
> > Enable per DMA channel interrupt that uses shared peripheral interrupt
> > (SPI), so only per channel TX and RX intr (TI/RI) are handled by TX/RX
> > ISR without calling common interrupt ISR.
> >
> > Signed-off-by: Teoh Ji Sheng <ji.sheng.teoh at intel.com>
> > Signed-off-by: Swee Leong Ching <leong.ching.swee at intel.com>
> > ---
> >  .../net/ethernet/stmicro/stmmac/dwxgmac2.h    |  3 ++
> >  .../ethernet/stmicro/stmmac/dwxgmac2_dma.c    | 32 +++++++++++-------
> -
> >  2 files changed, 22 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> > b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> > index 207ff1799f2c..04bf731cb7ea 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> > @@ -346,6 +346,9 @@
> >  /* DMA Registers */
> >  #define XGMAC_DMA_MODE			0x00003000
> >  #define XGMAC_SWR			BIT(0)
> 
> > +#define XGMAC_DMA_MODE_INTM_MASK	GENMASK(13, 12)
> > +#define XGMAC_DMA_MODE_INTM_SHIFT	12
> > +#define XGMAC_DMA_MODE_INTM_MODE1	0x1
> 
> AFAICS the DW XGMAC module doesn't maintain a convention of having the
> CSR fields macro names prefixed with the CSR name. Let's drop the
> DMA_MODE suffix from the macro name then:
> +#define XGMAC_INTM_MASK		GENMASK(13, 12)
> +#define XGMAC_INTM_SHIFT		12
> +#define XGMAC_INTM_MODE1		0x1
> to have it unified with the rest of the macros in dwxgmac2.h.
> 
> Other than that the change looks good. Thanks.
> 
> -Serge(y)
> 
Thanks. Will rename the macros in v3.
> >  #define XGMAC_DMA_SYSBUS_MODE		0x00003004
> >  #define XGMAC_WR_OSR_LMT		GENMASK(29, 24)
> >  #define XGMAC_WR_OSR_LMT_SHIFT		24
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
> > b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
> > index 3cde695fec91..dcb9f094415d 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
> > @@ -31,6 +31,13 @@ static void dwxgmac2_dma_init(void __iomem
> *ioaddr,
> >  		value |= XGMAC_EAME;
> >
> >  	writel(value, ioaddr + XGMAC_DMA_SYSBUS_MODE);
> > +
> > +	if (dma_cfg->multi_irq_en) {
> > +		value = readl(ioaddr + XGMAC_DMA_MODE);
> > +		value &= ~XGMAC_DMA_MODE_INTM_MASK;
> > +		value |= (XGMAC_DMA_MODE_INTM_MODE1 <<
> XGMAC_DMA_MODE_INTM_SHIFT);
> > +		writel(value, ioaddr + XGMAC_DMA_MODE);
> > +	}
> >  }
> >
> >  static void dwxgmac2_dma_init_chan(struct stmmac_priv *priv, @@
> > -365,19 +372,18 @@ static int dwxgmac2_dma_interrupt(struct
> stmmac_priv *priv,
> >  	}
> >
> >  	/* TX/RX NORMAL interrupts */
> > -	if (likely(intr_status & XGMAC_NIS)) {
> > -		if (likely(intr_status & XGMAC_RI)) {
> > -			u64_stats_update_begin(&rxq_stats->syncp);
> > -			rxq_stats->rx_normal_irq_n++;
> > -			u64_stats_update_end(&rxq_stats->syncp);
> > -			ret |= handle_rx;
> > -		}
> > -		if (likely(intr_status & (XGMAC_TI | XGMAC_TBU))) {
> > -			u64_stats_update_begin(&txq_stats->syncp);
> > -			txq_stats->tx_normal_irq_n++;
> > -			u64_stats_update_end(&txq_stats->syncp);
> > -			ret |= handle_tx;
> > -		}
> > +	if (likely(intr_status & XGMAC_RI)) {
> > +		u64_stats_update_begin(&rxq_stats->syncp);
> > +		rxq_stats->rx_normal_irq_n++;
> > +		u64_stats_update_end(&rxq_stats->syncp);
> > +		ret |= handle_rx;
> > +	}
> > +
> > +	if (likely(intr_status & (XGMAC_TI | XGMAC_TBU))) {
> > +		u64_stats_update_begin(&txq_stats->syncp);
> > +		txq_stats->tx_normal_irq_n++;
> > +		u64_stats_update_end(&txq_stats->syncp);
> > +		ret |= handle_tx;
> >  	}
> >
> >  	/* Clear interrupts */
> > --
> > 2.34.1
> >
> >



More information about the linux-arm-kernel mailing list