[PATCH v12 3/7] dt-bindings: display: bridge: Add Cadence MHDP8501

[Sandor Yu]

Add bindings for Cadence MHDP8501 DisplayPort/HDMI bridge.

Signed-off-by: Sandor Yu <Sandor.yu at nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
v9->v12:
 *No change.

 .../display/bridge/cdns,mhdp8501.yaml         | 104 ++++++++++++++++++
 1 file changed, 104 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml
new file mode 100644
index 0000000000000..3ae643845cfee
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/cdns,mhdp8501.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence MHDP8501 DP/HDMI bridge
+
+maintainers:
+  - Sandor Yu <Sandor.yu at nxp.com>
+
+description:
+  Cadence MHDP8501 DisplayPort/HDMI interface.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mq-mhdp8501
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: MHDP8501 DP/HDMI APB clock.
+
+  phys:
+    maxItems: 1
+    description:
+      phandle to the DisplayPort or HDMI PHY
+
+  interrupts:
+    items:
+      - description: Hotplug cable plugin.
+      - description: Hotplug cable plugout.
+
+  interrupt-names:
+    items:
+      - const: plug_in
+      - const: plug_out
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port at 0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port from display controller output.
+      port at 1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port to DisplayPort or HDMI connector.
+
+    required:
+      - port at 0
+      - port at 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - interrupt-names
+  - phys
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mhdp: display-bridge at 32c00000 {
+        compatible = "fsl,imx8mq-mhdp8501";
+        reg = <0x32c00000 0x100000>;
+        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "plug_in", "plug_out";
+        clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
+        phys = <&dp_phy>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port at 0 {
+                reg = <0>;
+
+                mhdp_in: endpoint {
+                    remote-endpoint = <&dcss_out>;
+                };
+            };
+
+            port at 1 {
+                reg = <1>;
+
+                mhdp_out: endpoint {
+                    remote-endpoint = <&dp_connector>;
+                };
+            };
+        };
+    };
-- 
2.34.1