[PATCH] irqchip/irq-brcmstb-l2: add write memory barrier before exit

[Florian Fainelli]

On 12/21/23 03:14, Florian Fainelli wrote:
> 
> 
> On 12/20/2023 8:32 PM, Doug Berger wrote:
>> It was observed on Broadcom devices that use GIC v3 architecture
>> L1 interrupt controllers as the parent of brcmstb-l2 interrupt
>> controllers that the deactivation of the parent irq could happen
>> before the brcmstb-l2 deasserted its output. This would lead the
>> GIC to reactivate the irq only to find that no L2 interrupt was
>> pending. The result was a spurious interrupt invoking the
>> handle_bad_irq() with its associated messaging. While this did
>> not create a functional problem it is a waste of cycles.
>>
>> The hazard exists because the memory mapped bus writes to the
>> brcmstb-l2 registers are buffered and the GIC v3 architecture
>> uses a very efficient system register write to deactivate the
>> interrupt. This commit adds a write memory barrier prior to
>> invoking chained_irq_exit() to introduce a dsb(st) on those
>> systems to ensure the system register write cannot be executed
>> until the memory mapped writes are visible to the system.
>>
>> Signed-off-by: Doug Berger <opendmb at gmail.com>
> 
> Acked-by: Florian Fainelli <florian.fainelli at broadcom.com>
> 
> I would be even keen on slapping a:
> 
> Fixes: 7f646e92766e ("irqchip: brcmstb-l2: Add Broadcom Set Top Box 
> Level-2 interrupt controller")
> 
> Thanks Doug!

Thomas, are you able to apply Doug's patch including the Fixes tag, or 
do you need it to be re-submitted with that tag as well as my Acked-by?

Thanks!
-- 
Florian

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4221 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20240109/3fca5478/attachment-0001.p7s>