[PATCH v7 08/16] PCI: imx6: Simplify switch-case logic by involve init_phy callback

[Manivannan Sadhasivam]

On Wed, Dec 27, 2023 at 01:27:19PM -0500, Frank Li wrote:

Subject: PCI: imx6: Introduce init_phy() callback to simplify PHY initialization

> Add drvdata::init_phy() callback function, so difference SOC choose
> difference callback function to simple switch-case logic.
> 

Same subject can be used in commit message.

> Signed-off-by: Frank Li <Frank.Li at nxp.com>
> ---
> 
> Notes:
>     change from v1 to v4:
>     - none
> 
>  drivers/pci/controller/dwc/pci-imx6.c | 135 ++++++++++++++------------
>  1 file changed, 71 insertions(+), 64 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 717e8fa030deb..d66a2db53bdb7 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -69,6 +69,9 @@ enum imx6_pcie_variants {
>  #define IMX6_PCIE_MAX_CLKS       6
>  
>  #define IMX6_PCIE_MAX_INSTANCES			2
> +
> +struct imx6_pcie;
> +
>  struct imx6_pcie_drvdata {
>  	enum imx6_pcie_variants variant;
>  	enum dw_pcie_device_mode mode;
> @@ -80,6 +83,7 @@ struct imx6_pcie_drvdata {
>  	const u32 ltssm_mask;
>  	const u32 mode_off[IMX6_PCIE_MAX_INSTANCES];
>  	const u32 mode_mask[IMX6_PCIE_MAX_INSTANCES];
> +	int (*init_phy)(struct imx6_pcie *pcie);
>  };
>  
>  struct imx6_pcie {
> @@ -323,76 +327,69 @@ static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data)
>  	return 0;
>  }
>  
> -static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
> +static int imx8mq_pcie_init_phy(struct imx6_pcie *imx6_pcie)
>  {
> -	switch (imx6_pcie->drvdata->variant) {
> -	case IMX8MM:
> -	case IMX8MM_EP:
> -	case IMX8MP:
> -	case IMX8MP_EP:
> -		/*
> -		 * The PHY initialization had been done in the PHY
> -		 * driver, break here directly.
> -		 */
> -		break;
> -	case IMX8MQ:
> -	case IMX8MQ_EP:
> -		/*
> -		 * TODO: Currently this code assumes external
> -		 * oscillator is being used
> -		 */
> +	/*
> +	 * TODO: Currently this code assumes external
> +	 * oscillator is being used

Wrap the comments to 80 column.

> +	 */
> +	regmap_update_bits(imx6_pcie->iomuxc_gpr,
> +			   imx6_pcie_grp_offset(imx6_pcie),
> +			   IMX8MQ_GPR_PCIE_REF_USE_PAD,
> +			   IMX8MQ_GPR_PCIE_REF_USE_PAD);
> +	/*
> +	 * Regarding the datasheet, the PCIE_VPH is suggested
> +	 * to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the
> +	 * VREG_BYPASS should be cleared to zero.
> +	 */

Same here.

> +	if (imx6_pcie->vph && regulator_get_voltage(imx6_pcie->vph) > 3000000)
>  		regmap_update_bits(imx6_pcie->iomuxc_gpr,
>  				   imx6_pcie_grp_offset(imx6_pcie),
> -				   IMX8MQ_GPR_PCIE_REF_USE_PAD,
> -				   IMX8MQ_GPR_PCIE_REF_USE_PAD);
> -		/*
> -		 * Regarding the datasheet, the PCIE_VPH is suggested
> -		 * to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the
> -		 * VREG_BYPASS should be cleared to zero.
> -		 */
> -		if (imx6_pcie->vph &&
> -		    regulator_get_voltage(imx6_pcie->vph) > 3000000)
> -			regmap_update_bits(imx6_pcie->iomuxc_gpr,
> -					   imx6_pcie_grp_offset(imx6_pcie),
> -					   IMX8MQ_GPR_PCIE_VREG_BYPASS,
> -					   0);
> -		break;
> -	case IMX7D:
> -		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> +				   IMX8MQ_GPR_PCIE_VREG_BYPASS,
> +				   0);
> +
> +	return 0;
> +}
> +
> +static int imx7d_pcie_init_phy(struct imx6_pcie *imx6_pcie)
> +{
> +	return	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,

For consistency, return 0.

- Mani

-- 
மணிவண்ணன் சதாசிவம்