[RFC PATCH] KVM: arm64: Workaround for Ampere AC03_CPU_36 (exception taken to an incorrect EL)

Marc Zyngier maz at kernel.org
Sat Jan 6 04:13:09 PST 2024


[reviewing both patches in one go, as it is way easier]

On Fri, 05 Jan 2024 23:53:10 +0000,
Oliver Upton <oliver.upton at linux.dev> wrote:
> 
> Hi Ilkka,
> 
> On Fri, Jan 05, 2024 at 01:32:51PM -0800, Ilkka Koskinen wrote:
> > Due to erratum AC03_CPU_36 on AmpereOne, if an Asynchronous Exception
> > (interrupts or SErrors) occurs to EL2, while EL2 software is modifying
> > system register bits that control EL2 exception behavior, the processor
> > may take an exception to an incorrect Exception Level.

What needs to be described (both in the commit message and as part of
the code) is under what circumstances this mis-routing happens.

Is it that just clearing TGE while being at EL2 always results in the
asynchronous exception being routed to the wrong exception level? Or
is it a more subtle issue related to synchronisation?

Also worth describing is to which other exception level is the
exception delivered? EL1? EL3?

> > 
> > The affected system registers are HCR_EL2 and SCTLR_EL2, which contain
> > control bits for routing and enabling of EL2 exceptions.

How does SCTLR_EL2 affects interrupt delivery? Is this related to
FEAT_NMI and SCTLR_EL2.{NMI,SPINTMASK}? Because this is the only part
of this register that has anything to do with interrupts.

> > 
> > The issue is triggered when HGE.TGE bit is cleared while having
> > AMO/IMO/FMO bits cleared too. To avoid the exception getting taken
> > at a wrong Exception Level, we set AMO/IMO/FMO.
> 
> We toggle HCR_EL2 for other things besides TLB invalidations, and the
> changelog does not describe why they're apparently unaffected.
> 
> > Suggested-by: D Scott Phillips <scott at os.amperecomputing.com>
> > Signed-off-by: Ilkka Koskinen <ilkka at os.amperecomputing.com>
> 
> This isn't an acceptable way to go about errata mitigations. Besides
> extremely unusual circumstances, the pattern is to use a cpucap &&
> alternatives to only enable the workaround on affected designs. We then
> document the errata in the expected places (Kconfig and kernel
> documentation) such that the folks saddled with maintaining this stuff
> know how to handle it years down the line.

+1. This hack will have to live forever, while the lack of
documentation makes it totally unmaintainable. The KVM code *will*
change in ways that cannot be anticipated today, and without
exhaustive documentation, we will not be able to do a good job at
maintaining this system alive by correctly mitigating the erratum.

> 
> > ---
> >  arch/arm64/kvm/hyp/vhe/tlb.c | 12 +++++++++---
> >  1 file changed, 9 insertions(+), 3 deletions(-)
> > 
> > diff --git a/arch/arm64/kvm/hyp/vhe/tlb.c b/arch/arm64/kvm/hyp/vhe/tlb.c
> > index b32e2940df7d..c72fdd2e4549 100644
> > --- a/arch/arm64/kvm/hyp/vhe/tlb.c
> > +++ b/arch/arm64/kvm/hyp/vhe/tlb.c
> > @@ -61,9 +61,15 @@ static void __tlb_switch_to_guest(struct kvm_s2_mmu *mmu,
> >  	 * has an ISB in order to deal with this.
> >  	 */
> >  	__load_stage2(mmu, mmu->arch);
> > -	val = read_sysreg(hcr_el2);
> > -	val &= ~HCR_TGE;
> > -	write_sysreg(val, hcr_el2);
> > +
> > +	/*
> > +	 * With {E2H,TGE} == {1,0}, IMO == 1 is required so that IRQs are not
> > +	 * all masked.
> 
> Huh? HCR_EL2.IMO affects the *routing* of IRQs at exception levels
> *lower than* EL2.

Yup, and there is *zero* requirement for IMO to have any particular
value while running at EL2. As long as you're at EL2, physical
interrupts that are not targeting EL3 are taken at EL2, full stop.

I'm all for being creative, but reinventing the architecture as a
justification for an erratum workaround is taking it *way* too far.

> 
> > This also works around AmpereOne erratum AC03_CPU_36
> > +	 * which can incorrectly route an IRQ to EL1 when HCR_EL2.{E2H,TGE} is
> > +	 * written from {1,1} to {1,0} with interrupts unmasked.
> > +	 */
> > +	sysreg_clear_set(hcr_el2, HCR_TGE, HCR_AMO | HCR_IMO | HCR_FMO);
> > +
> 
> Rather than further modifying the exception controls, why not mask DAIF
> like we do on guest entry/exit? AFAICT that is the only reason KVM_RUN
> is unaffected by this erratum.
> 
> This is what I have been using on a few AmpereOne systems:
> 
> From 265cb193190c13c651d8e008d34d1d18505d4804 Mon Sep 17 00:00:00 2001
> From: Oliver Upton <oliver.upton at linux.dev>
> Date: Fri, 5 Jan 2024 23:18:14 +0000
> Subject: [PATCH] KVM: arm64: Mitigate AmpereOne erratum AC03_CPU_36
> 
> The AmpereOne design suffers from an erratum where if an asynchronous
> exception arrives while EL2 is modifying hypervisor exception controls
> (i.e. HCR_EL2, SCTLR_EL2) the PE may take an invalid exception to
> another EL.

Same questions about SCTLR_EL2 and the notion of "another EL".

> 
> KVM's guest entry/exit path is unaffected because DAIF is already masked
> when modifying HCR_EL2. However, KVM only masks IRQs when switching to
> the guest MMU context for a TLB invalidation, meaning it is possible for
> an intervening exception to trigger the erratum.

This is a bit unclear, because masking interrupts is commonly done
using DAIF. You may want to talk about pseudo-NMIs early on and
explain that we rely on PMR for masking in this case, still allowing
interrupts to be handled.

> This becomes
> immediately obvious when profiling a KVM VM with pseudo-NMIs enabled,
> such as:
> 
>   perf record ./dirty_log_perf_test -m 2 -s anonymous_thp -v 4 -b 4G
> 
> Mitigate the erratum by masking DAIF completely before switching to the
> guest MMU context.
> 
> Signed-off-by: Oliver Upton <oliver.upton at linux.dev>
> ---
>  Documentation/arch/arm64/silicon-errata.rst |  2 ++
>  arch/arm64/Kconfig                          | 16 ++++++++++++++++
>  arch/arm64/kernel/cpu_errata.c              |  7 +++++++
>  arch/arm64/kvm/hyp/vhe/tlb.c                | 20 ++++++++++++++++++--
>  arch/arm64/tools/cpucaps                    |  1 +
>  5 files changed, 44 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/arch/arm64/silicon-errata.rst b/Documentation/arch/arm64/silicon-errata.rst
> index f47f63bcf67c..aea7a75ae434 100644
> --- a/Documentation/arch/arm64/silicon-errata.rst
> +++ b/Documentation/arch/arm64/silicon-errata.rst
> @@ -52,6 +52,8 @@ stable kernels.
>  | Allwinner      | A64/R18         | UNKNOWN1        | SUN50I_ERRATUM_UNKNOWN1     |
>  +----------------+-----------------+-----------------+-----------------------------+
>  +----------------+-----------------+-----------------+-----------------------------+
> +| Ampere         | AmpereOne       | AC03_CPU_36     | AMPERE_ERRATUM_AC03_CPU_36  |
> ++----------------+-----------------+-----------------+-----------------------------+
>  | Ampere         | AmpereOne       | AC03_CPU_38     | AMPERE_ERRATUM_AC03_CPU_38  |
>  +----------------+-----------------+-----------------+-----------------------------+
>  +----------------+-----------------+-----------------+-----------------------------+
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index 7b071a00425d..9ba04b90e945 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -434,6 +434,22 @@ config AMPERE_ERRATUM_AC03_CPU_38
>  
>  	  If unsure, say Y.
>  
> +config AMPERE_ERRATUM_AC03_CPU_36
> +	bool "AmpereOne: AC03_CPU_36: CPU takes invalid asynchronous exception while changing exception controls"
> +	default y
> +	help
> +	  This option adds an alternative code sequence to work around Ampere
> +	  erratum AC03_CPU_36 on AmpereOne parts.
> +
> +	  The affected designs can take an invalid exception to an incorrect
> +	  exception level if an asynchronous exception arrives while software
> +	  is changing the EL2 exception controls (i.e. HCR_EL2, SCTLR_EL2).
> +
> +	  The workaround forces KVM to mask all asynchronous exception sources
> +	  when switching to the guest MMU context for TLB invalidations.
> +
> +	  If unsure, say Y.
> +
>  config ARM64_WORKAROUND_CLEAN_CACHE
>  	bool
>  
> diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
> index e29e0fea63fb..7e2856360f38 100644
> --- a/arch/arm64/kernel/cpu_errata.c
> +++ b/arch/arm64/kernel/cpu_errata.c
> @@ -727,6 +727,13 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
>  		.capability = ARM64_WORKAROUND_AMPERE_AC03_CPU_38,
>  		ERRATA_MIDR_ALL_VERSIONS(MIDR_AMPERE1),
>  	},
> +#endif
> +#ifdef CONFIG_AMPERE_ERRATUM_AC03_CPU_36
> +	{
> +		.desc = "AmpereOne erratum AC03_CPU_36",
> +		.capability = ARM64_WORKAROUND_AMPERE_AC03_CPU_36,
> +		ERRATA_MIDR_ALL_VERSIONS(MIDR_AMPERE1),
> +	},
>  #endif
>  	{
>  	}
> diff --git a/arch/arm64/kvm/hyp/vhe/tlb.c b/arch/arm64/kvm/hyp/vhe/tlb.c
> index b636b4111dbf..cedfb0a32fa0 100644
> --- a/arch/arm64/kvm/hyp/vhe/tlb.c
> +++ b/arch/arm64/kvm/hyp/vhe/tlb.c
> @@ -17,13 +17,29 @@ struct tlb_inv_context {
>  	u64			sctlr;
>  };
>  
> +#define __tlb_daif_save(flags)						\
> +({									\
> +	if (cpus_have_final_cap(ARM64_WORKAROUND_AMPERE_AC03_CPU_36))	\
> +		flags = local_daif_save();				\
> +	else								\
> +		local_irq_save(flags);					\
> +})
> +
> +#define __tlb_daif_restore(flags)					\
> +({									\
> +	if (cpus_have_final_cap(ARM64_WORKAROUND_AMPERE_AC03_CPU_36))	\
> +		local_daif_restore(flags);				\
> +	else								\
> +		local_irq_restore(flags);				\
> +})
> +

I'd really like a comment about *why* we are doing that.

>  static void __tlb_switch_to_guest(struct kvm_s2_mmu *mmu,
>  				  struct tlb_inv_context *cxt)
>  {
>  	struct kvm_vcpu *vcpu = kvm_get_running_vcpu();
>  	u64 val;
>  
> -	local_irq_save(cxt->flags);
> +	__tlb_daif_save(cxt->flags);
>  
>  	if (vcpu && mmu != vcpu->arch.hw_mmu)
>  		cxt->mmu = vcpu->arch.hw_mmu;
> @@ -86,7 +102,7 @@ static void __tlb_switch_to_host(struct tlb_inv_context *cxt)
>  		write_sysreg_el1(cxt->sctlr, SYS_SCTLR);
>  	}
>  
> -	local_irq_restore(cxt->flags);
> +	__tlb_daif_restore(cxt->flags);
>  }
>  
>  void __kvm_tlb_flush_vmid_ipa(struct kvm_s2_mmu *mmu,
> diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps
> index b98c38288a9d..cfaae3b4d2d0 100644
> --- a/arch/arm64/tools/cpucaps
> +++ b/arch/arm64/tools/cpucaps
> @@ -85,6 +85,7 @@ WORKAROUND_2457168
>  WORKAROUND_2645198
>  WORKAROUND_2658417
>  WORKAROUND_2966298
> +WORKAROUND_AMPERE_AC03_CPU_36
>  WORKAROUND_AMPERE_AC03_CPU_38
>  WORKAROUND_TRBE_OVERWRITE_FILL_MODE
>  WORKAROUND_TSB_FLUSH_FAILURE

Other than the passing comments, I'm OK with this patch. However, I am
very worried that this is only the start of a very long game of
whack-a-mole, because there is no actual documentation on what goes
wrong.

For example, we have plenty of writes to SCTLR_EL2 (using the
SCTLR_EL1 alias if running VHE) for MTE. Are any of those affected?

Short of having some solid handle on what is happening, I don't see
how we can promise to support this system.

	M.

-- 
Without deviation from the norm, progress is not possible.



More information about the linux-arm-kernel mailing list