[RFC 7/9] dt-bindings: wireless: ath11k: describe QCA6390

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>

Describe the ath11k variant present on the QCA6390 module.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
---
 .../bindings/net/wireless/qcom,ath11k-pci.yaml     | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
index 817f02a8b481..f584c25f4276 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
@@ -16,6 +16,7 @@ description: |
 properties:
   compatible:
     enum:
+      - pci17cb,1101  # QCA6390
       - pci17cb,1103  # WCN6855
 
   reg:
@@ -27,6 +28,19 @@ properties:
       string to uniquely identify variant of the calibration data for designs
       with colliding bus and device ids
 
+  enable-gpios:
+    description: GPIO line enabling the ATH11K module when asserted.
+    maxItems: 1
+
+  vddpmu-supply:
+    description: VDD_PMU supply regulator handle
+
+  vddpcie1-supply:
+    description: VDD_PCIE1 supply regulator handle
+
+  vddpcie2-supply:
+    description: VDD_PCIE2 supply regulator handle
+
 required:
   - compatible
   - reg
-- 
2.40.1