[PATCH] cpufreq: CPPC: Resolve the large frequency discrepancy from cpuinfo_cur_freq

lihuisong (C) lihuisong at huawei.com
Thu Jan 4 01:07:26 PST 2024


在 2024/1/3 18:59, Rafael J. Wysocki 写道:
> On Mon, Dec 18, 2023 at 3:15 AM lihuisong (C) <lihuisong at huawei.com> wrote:
>>
>> 在 2023/12/15 10:41, lihuisong (C) 写道:
>>> Hi Rafael,
>>>
>>> Thanks for your review.😁
>>>
>>> 在 2023/12/15 3:31, Rafael J. Wysocki 写道:
>>>> On Tue, Dec 12, 2023 at 8:26 AM Huisong Li <lihuisong at huawei.com> wrote:
>>>>> Many developers found that the cpu current frequency is greater than
>>>>> the maximum frequency of the platform, please see [1], [2] and [3].
>>>>>
>>>>> In the scenarios with high memory access pressure, the patch [1] has
>>>>> proved the significant latency of cpc_read() which is used to obtain
>>>>> delivered and reference performance counter cause an absurd frequency.
>>>>> The sampling interval for this counters is very critical and is
>>>>> expected
>>>>> to be equal. However, the different latency of cpc_read() has a direct
>>>>> impact on their sampling interval.
>>>>>
>>>>> This patch adds a interface, cpc_read_arch_counters_on_cpu, to read
>>>>> delivered and reference performance counter together. According to my
>>>>> test[4], the discrepancy of cpu current frequency in the scenarios with
>>>>> high memory access pressure is lower than 0.2% by stress-ng
>>>>> application.
>>>>>
>>>>> [1]
>>>>> https://lore.kernel.org/all/20231025093847.3740104-4-zengheng4@huawei.com/
>>>>> [2]
>>>>> https://lore.kernel.org/all/20230328193846.8757-1-yang@os.amperecomputing.com/
>>>>> [3]
>>>>> https://lore.kernel.org/all/20230418113459.12860-7-sumitg@nvidia.com/
>>>>>
>>>>> [4] My local test:
>>>>> The testing platform enable SMT and include 128 logical CPU in total,
>>>>> and CPU base frequency is 2.7GHz. Reading "cpuinfo_cur_freq" for each
>>>>> physical core on platform during the high memory access pressure from
>>>>> stress-ng, and the output is as follows:
>>>>>     0: 2699133     2: 2699942     4: 2698189     6: 2704347
>>>>>     8: 2704009    10: 2696277    12: 2702016    14: 2701388
>>>>>    16: 2700358    18: 2696741    20: 2700091    22: 2700122
>>>>>    24: 2701713    26: 2702025    28: 2699816    30: 2700121
>>>>>    32: 2700000    34: 2699788    36: 2698884    38: 2699109
>>>>>    40: 2704494    42: 2698350    44: 2699997    46: 2701023
>>>>>    48: 2703448    50: 2699501    52: 2700000    54: 2699999
>>>>>    56: 2702645    58: 2696923    60: 2697718    62: 2700547
>>>>>    64: 2700313    66: 2700000    68: 2699904    70: 2699259
>>>>>    72: 2699511    74: 2700644    76: 2702201    78: 2700000
>>>>>    80: 2700776    82: 2700364    84: 2702674    86: 2700255
>>>>>    88: 2699886    90: 2700359    92: 2699662    94: 2696188
>>>>>    96: 2705454    98: 2699260   100: 2701097   102: 2699630
>>>>> 104: 2700463   106: 2698408   108: 2697766   110: 2701181
>>>>> 112: 2699166   114: 2701804   116: 2701907   118: 2701973
>>>>> 120: 2699584   122: 2700474   124: 2700768   126: 2701963
>>>>>
>>>>> Signed-off-by: Huisong Li <lihuisong at huawei.com>
>>>> First off, please Cc ACPI-related patches to linux-acpi.
>>> got it.
>>>
>>> +linux-acpi at vger.kernel.org
>>>
>>>>> ---
>>>>>    arch/arm64/kernel/topology.c | 43
>>>>> ++++++++++++++++++++++++++++++++++--
>>>>>    drivers/acpi/cppc_acpi.c     | 22 +++++++++++++++---
>>>>>    include/acpi/cppc_acpi.h     |  5 +++++
>>>>>    3 files changed, 65 insertions(+), 5 deletions(-)
>>>>>
>>>>> diff --git a/arch/arm64/kernel/topology.c
>>>>> b/arch/arm64/kernel/topology.c
>>>>> index 7d37e458e2f5..c3122154d738 100644
>>>>> --- a/arch/arm64/kernel/topology.c
>>>>> +++ b/arch/arm64/kernel/topology.c
>>>>> @@ -299,6 +299,11 @@ core_initcall(init_amu_fie);
>>>>>    #ifdef CONFIG_ACPI_CPPC_LIB
>>>>>    #include <acpi/cppc_acpi.h>
>>>>>
>>>>> +struct amu_counters {
>>>>> +       u64 corecnt;
>>>>> +       u64 constcnt;
>>>>> +};
>>>>> +
>>>>>    static void cpu_read_corecnt(void *val)
>>>>>    {
>>>>>           /*
>>>>> @@ -322,8 +327,27 @@ static void cpu_read_constcnt(void *val)
>>>>>                         0UL : read_constcnt();
>>>>>    }
>>>>>
>>>>> +static void cpu_read_amu_counters(void *data)
>>>>> +{
>>>>> +       struct amu_counters *cnt = (struct amu_counters *)data;
>>>>> +
>>>>> +       /*
>>>>> +        * The running time of the this_cpu_has_cap() might have a
>>>>> couple of
>>>>> +        * microseconds and is significantly increased to tens of
>>>>> microseconds.
>>>>> +        * But AMU core and constant counter need to be read togeter
>>>>> without any
>>>>> +        * time interval to reduce the calculation discrepancy using
>>>>> this counters.
>>>>> +        */
>>>>> +       if (this_cpu_has_cap(ARM64_WORKAROUND_2457168)) {
>>>>> +               cnt->corecnt = read_corecnt();
>>>> This statement is present in both branches, so can it be moved before
>>>> the if ()?
>>> Yes.
>>> Do you mean adding a blank line before if()?
>> Sorry, I misunderstood you.
>> The statement "cnt->corecnt = read_corecnt();" cannot be moved before
>> the if().
>> The AMU core and constant counter need to be read togeter without any
>> time interval as described in code comments.
>> The this_cpu_has_cap() is time-consuming.
>> That is why I don't use the cpu_read_constcnt() to read constant counter.
> So define something like
>
> static inline void amu_read_counters(struct amu_counters *cnt, bool
> read_constcnt)
> {
>                cnt->corecnt = read_corecnt();
>                if (read_constcnt)
>                              cnt->constcnt = read_constcnt();
>                else
>                              cnt->constcnt = 0;
> }
>
>>>>> +               cnt->constcnt = 0;
>>>>> +       } else {
>>>>> +               cnt->corecnt = read_corecnt();
>>>>> +               cnt->constcnt = read_constcnt();
>>>>> +       }
> and use it like this:
>
> amu_read_counters(cnt, !this_cpu_has_cap(ARM64_WORKAROUND_2457168);
>
> It should work as expected AFAICS.
Yes it would work well.
The new cpc_read_arch_counters_on_cpu() uses the counters_read_on_cpu() 
to read core counters on specified cpu.
smp_call_function_single() called by counters_read_on_cpu() just support 
to pass one argument for "smp_call_func_t func".
So we cannot define the function as you suggested. what do you think?
>
>>>>> +}
>>>>> +
>>>>>    static inline
>>>>> -int counters_read_on_cpu(int cpu, smp_call_func_t func, u64 *val)
>>>>> +int counters_read_on_cpu(int cpu, smp_call_func_t func, void *data)
>>>>>    {
>>>>>           /*
>>>>>            * Abort call on counterless CPU or when interrupts are
>>>>> @@ -335,7 +359,7 @@ int counters_read_on_cpu(int cpu,
>>>>> smp_call_func_t func, u64 *val)
>>>>>           if (WARN_ON_ONCE(irqs_disabled()))
>>>>>                   return -EPERM;
>>>>>
>>>>> -       smp_call_function_single(cpu, func, val, 1);
>>>>> +       smp_call_function_single(cpu, func, data, 1);
>>>>>
>>>>>           return 0;
>>>>>    }
>>>>> @@ -364,6 +388,21 @@ bool cpc_ffh_supported(void)
>>>>>           return true;
>>>>>    }
>>>>>
>>>>> +int cpc_read_arch_counters_on_cpu(int cpu, u64 *delivered, u64
>>>>> *reference)
>>>>> +{
>>>>> +       struct amu_counters cnts = {0};
>>>>> +       int ret;
>>>>> +
>>>>> +       ret = counters_read_on_cpu(cpu, cpu_read_amu_counters, &cnts);
>>>>> +       if (ret)
>>>>> +               return ret;
>>>>> +
>>>>> +       *delivered = cnts.corecnt;
>>>>> +       *reference = cnts.constcnt;
>>>>> +
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>>    int cpc_read_ffh(int cpu, struct cpc_reg *reg, u64 *val)
>>>>>    {
>>>>>           int ret = -EOPNOTSUPP;
>>>>> diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
>>>>> index 7ff269a78c20..f303fabd7cfe 100644
>>>>> --- a/drivers/acpi/cppc_acpi.c
>>>>> +++ b/drivers/acpi/cppc_acpi.c
>>>>> @@ -1299,6 +1299,11 @@ bool cppc_perf_ctrs_in_pcc(void)
>>>>>    }
>>>>>    EXPORT_SYMBOL_GPL(cppc_perf_ctrs_in_pcc);
>>>>>
>>>>> +int __weak cpc_read_arch_counters_on_cpu(int cpu, u64 *delivered,
>>>>> u64 *reference)
>>>>> +{
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>>    /**
>>>>>     * cppc_get_perf_ctrs - Read a CPU's performance feedback counters.
>>>>>     * @cpunum: CPU from which to read counters.
>>>>> @@ -1313,7 +1318,8 @@ int cppc_get_perf_ctrs(int cpunum, struct
>>>>> cppc_perf_fb_ctrs *perf_fb_ctrs)
>>>>>                   *ref_perf_reg, *ctr_wrap_reg;
>>>>>           int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
>>>>>           struct cppc_pcc_data *pcc_ss_data = NULL;
>>>>> -       u64 delivered, reference, ref_perf, ctr_wrap_time;
>>>>> +       u64 delivered = 0, reference = 0;
>>>>> +       u64 ref_perf, ctr_wrap_time;
>>>>>           int ret = 0, regs_in_pcc = 0;
>>>>>
>>>>>           if (!cpc_desc) {
>>>>> @@ -1350,8 +1356,18 @@ int cppc_get_perf_ctrs(int cpunum, struct
>>>>> cppc_perf_fb_ctrs *perf_fb_ctrs)
>>>>>                   }
>>>>>           }
>>>>>
>>>>> -       cpc_read(cpunum, delivered_reg, &delivered);
>>>>> -       cpc_read(cpunum, reference_reg, &reference);
>>>>> +       if (cpc_ffh_supported()) {
>>>>> +               ret = cpc_read_arch_counters_on_cpu(cpunum,
>>>>> &delivered, &reference);
>>>>> +               if (ret) {
>>>>> +                       pr_debug("read arch counters failed,
>>>>> ret=%d.\n", ret);
>>>>> +                       ret = 0;
>>>>> +               }
>>>>> +       }
>>>> The above is surely not applicable to every platform using CPPC.  Also
>>> cpc_ffh_supported is aimed to control only the platform supported FFH
>>> to enter.
>>> cpc_read_arch_counters_on_cpu is also needed to implemented by each
>>> platform according to their require.
> Well, exactly.
>
>>> Here just implement this interface for arm64.
> So on x86 cpc_ffh_supported() returns true and
> cpc_read_arch_counters_on_cpu() will do nothing, so it will always
> fall back to using cpc_read().  That is not particularly
> straightforward IMV.
Understand you.
But we have to do like this to be compatible with all platforms.
I am thinking twice about cpc_ffh_supported().
And I found that calling cpc_ffh_supported() here is redundant for ARM.
Because counters_read_on_cpu() has verified if this CPU support AMU counter.
What do you say we remove cpc_ffh_supported() here and directly call 
this new architecture interface?
>
>>>> it looks like in the ARM64_WORKAROUND_2457168 enabled case it is just
>>>> pointless overhead, because "reference" is always going to be 0 here
>>>> then.
>>> Right, it is always going to be 0 here for the
>>> ARM64_WORKAROUND_2457168 enabled case .
>>> But ARM64_WORKAROUND_2457168 is a macro releated to ARM.
>>> It seems that it is not appropriate for this macro to appear this
>>> common place for all platform, right?
>>>
>>>> Please clean that up.
>>>>
>>>>> +       if (!delivered || !reference) {
>>>>> +               cpc_read(cpunum, delivered_reg, &delivered);
>>>>> +               cpc_read(cpunum, reference_reg, &reference);
>>>>> +       }
>>>>> +
>>>>>           cpc_read(cpunum, ref_perf_reg, &ref_perf);
>>>>>
>>>>>           /*
>>>>> diff --git a/include/acpi/cppc_acpi.h b/include/acpi/cppc_acpi.h
>>>>> index 6126c977ece0..07d4fd82d499 100644
>>>>> --- a/include/acpi/cppc_acpi.h
>>>>> +++ b/include/acpi/cppc_acpi.h
>>>>> @@ -152,6 +152,7 @@ extern bool cpc_ffh_supported(void);
>>>>>    extern bool cpc_supported_by_cpu(void);
>>>>>    extern int cpc_read_ffh(int cpunum, struct cpc_reg *reg, u64 *val);
>>>>>    extern int cpc_write_ffh(int cpunum, struct cpc_reg *reg, u64 val);
>>>>> +extern int cpc_read_arch_counters_on_cpu(int cpu, u64 *delivered,
>>>>> u64 *reference);
>>>>>    extern int cppc_get_epp_perf(int cpunum, u64 *epp_perf);
>>>>>    extern int cppc_set_epp_perf(int cpu, struct cppc_perf_ctrls
>>>>> *perf_ctrls, bool enable);
>>>>>    extern int cppc_get_auto_sel_caps(int cpunum, struct
>>>>> cppc_perf_caps *perf_caps);
>>>>> @@ -209,6 +210,10 @@ static inline int cpc_write_ffh(int cpunum,
>>>>> struct cpc_reg *reg, u64 val)
>>>>>    {
>>>>>           return -ENOTSUPP;
>>>>>    }
>>>>> +static inline int cpc_read_arch_counters_on_cpu(int cpu, u64
>>>>> *delivered, u64 *reference)
>>>>> +{
>>>>> +       return -EOPNOTSUPP;
>>>>> +}
>>>>>    static inline int cppc_set_epp_perf(int cpu, struct
>>>>> cppc_perf_ctrls *perf_ctrls, bool enable)
>>>>>    {
>>>>>           return -ENOTSUPP;
>>>>> --
>>>> .
>>> _______________________________________________
>>> linux-arm-kernel mailing list
>>> linux-arm-kernel at lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> .



More information about the linux-arm-kernel mailing list