[net-next PATCH v7 2/5] dt-bindings: net: phy: Document LED inactive high impedance mode

[Christian Marangi]

Document LED inactive high impedance mode to set the LED to require high
impedance configuration to be turned OFF.

Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
---
Changes v5:
- Add this patch

 Documentation/devicetree/bindings/leds/common.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index f5b40df6b421..9e7b4aabe0bb 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -206,6 +206,12 @@ properties:
       Makes LED active low. To turn the LED ON, line needs to be
       set to low voltage instead of high.
 
+  inactive-high-impedance:
+    type: boolean
+    description:
+      Set LED to high-impedance mode to turn the LED OFF. LED might also
+      describe this mode as tristate.
+
   # Required properties for flash LED child nodes:
   flash-max-microamp:
     description:
-- 
2.43.0