[PATCH v5 2/2] arm64: dts: imx93-var-som: Add Variscite VAR-SOM-MX93

[Stefan Wahren]

Hi Mathieu,

Am 03.01.24 um 15:36 schrieb Mathieu Othacehe:
> Add DTSI for Variscite VAR-SOM-MX93 System on Module and DTS for Variscite
> VAR-SOM-MX93 on Symphony evaluation board.
>
> This version comes with:
> - NXP i.MX 93 Dual, 1.7GHz, Cortex-A55 + Cortex-M33
> - 2 GB of RAM
> - 16GB eMMC
> - 802.11ax/ac/a/b/g/n WiFi with 5.3 Bluetooth
> - CAN bus
> - Audio codec
>
> Reviewed-by: Fabio Estevam <festevam at gmail.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> Signed-off-by: Mathieu Othacehe <othacehe at gnu.org>
> ---
>   arch/arm64/boot/dts/freescale/Makefile        |   1 +
>   .../dts/freescale/imx93-var-som-symphony.dts  | 352 ++++++++++++++++++
>   .../boot/dts/freescale/imx93-var-som.dtsi     | 111 ++++++
>   3 files changed, 464 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
>   create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-som.dtsi
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 2e027675d7bb..a6f1700961e3 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -203,6 +203,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
>   dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
>   dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
>   dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
>
>   imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
>   imx8mm-venice-gw72xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
> diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
> new file mode 100644
> index 000000000000..963fa1a6d09c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
> @@ -0,0 +1,352 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2021 NXP
> + * Copyright 2023 Variscite Ltd.
> + */
> +
> +/dts-v1/;
> +
> +#include "imx93-var-som.dtsi"
> +
> +/{
> +	model = "Variscite VAR-SOM-MX93 on Symphony evaluation board";
> +	compatible = "variscite,var-som-mx93-symphony",
> +		     "variscite,var-som-mx93", "fsl,imx93";
> +
> +	aliases {
> +		ethernet0 = &eqos;
> +		ethernet1 = &fec;
> +	};
> +
> +	chosen {
> +		stdout-path = &lpuart1;
> +	};
> +
> +	/*
> +	 * Needed only for Symphony <= v1.5
> +	 */
> +	reg_fec_phy: regulator-fec-phy {
> +		compatible = "regulator-fixed";
> +		regulator-name = "fec-phy";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		regulator-enable-ramp-delay = <20000>;
> +		gpio = <&pca9534 7 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		regulator-always-on;
> +	};
> +
> +	reg_usdhc2_vmmc: regulator-usdhc2 {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
> +		regulator-name = "VSD_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>;
> +		off-on-delay-us = <20000>;
> +		enable-active-high;
> +	};
> +
> +	reg_vref_1v8: regulator-adc-vref {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vref_1v8";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		ethosu_mem: ethosu-region at 88000000 {
> +			compatible = "shared-dma-pool";
> +			reusable;
> +			reg = <0x0 0x88000000 0x0 0x8000000>;
> +		};
> +
> +		vdev0vring0: vdev0vring0 at 87ee0000 {
> +			reg = <0 0x87ee0000 0 0x8000>;
> +			no-map;
> +		};
> +
> +		vdev0vring1: vdev0vring1 at 87ee8000 {
> +			reg = <0 0x87ee8000 0 0x8000>;
> +			no-map;
> +		};
> +
> +		vdev1vring0: vdev1vring0 at 87ef0000 {
> +			reg = <0 0x87ef0000 0 0x8000>;
> +			no-map;
> +		};
> +
> +		vdev1vring1: vdev1vring1 at 87ef8000 {
> +			reg = <0 0x87ef8000 0 0x8000>;
> +			no-map;
> +		};
> +
> +		rsc_table: rsc-table at 2021f000 {
> +			reg = <0 0x2021f000 0 0x1000>;
> +			no-map;
> +		};
> +
> +		vdevbuffer: vdevbuffer at 87f00000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0 0x87f00000 0 0x100000>;
> +			no-map;
> +		};
> +
> +		ele_reserved: ele-reserved at 87de0000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0 0x87de0000 0 0x100000>;
> +			no-map;
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		key-back {
> +			label = "Back";
> +			gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_BACK>;
> +		};
> +
> +		key-home {
> +			label = "Home";
> +			gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_HOME>;
> +		};
> +
> +		key-menu {
> +			label = "Menu";
> +			gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_MENU>;
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		status = "okay";
> +
> +		heartbeat {
Please use a node name, which describe the hardware in general like "led".
> +			label = "Heartbeat";
The label property is deprecated, please use function and color instead:

https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/leds/common.yaml

Best regards
> +			gpios = <&pca9534 0 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +};
> +