[PATCH 2/2] arm64: dts: juno: fix thermal zone node names

[Krzysztof Kozlowski]

Linux kernel uses thermal zone node name during registering thermal
zones and has a hard-coded limit of 20 characters, including terminating
NUL byte.  Exceeding the limit will cause failure to configure thermal
zone.

Reported-by: Rob Herring <robh at kernel.org>
Closes: https://lore.kernel.org/all/CAL_JsqKogbT_4DPd1n94xqeHaU_J8ve5K09WOyVsRX3jxxUW3w@mail.gmail.com/
Fixes: fb4d25d7a33f ("arm64: dts: juno: Align thermal zone names with bindings")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/arm64/boot/dts/arm/juno-base.dtsi | 4 ++--
 arch/arm64/boot/dts/arm/juno-scmi.dtsi | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index b897f5542c0a..98ed2b329ed6 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -773,14 +773,14 @@ soc_crit0: trip0 {
 			};
 		};
 
-		big_cluster_thermal_zone: big-cluster-thermal {
+		big_cluster_thermal_zone: big-cl-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 21>;
 			status = "disabled";
 		};
 
-		little_cluster_thermal_zone: little-cluster-thermal {
+		little_cluster_thermal_zone: little-cl-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 22>;
diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dtsi b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
index 31929e2377d8..f38c5b6ef657 100644
--- a/arch/arm64/boot/dts/arm/juno-scmi.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
@@ -84,11 +84,11 @@ soc-thermal {
 			thermal-sensors = <&scmi_sensors0 3>;
 		};
 
-		big-cluster-thermal {
+		big-cl-thermal {
 			thermal-sensors = <&scmi_sensors0 21>;
 		};
 
-		little-cluster-thermal {
+		little-cl-thermal {
 			thermal-sensors = <&scmi_sensors0 22>;
 		};
 
-- 
2.34.1