[PATCH] dt-bindings: firmware: arm,scmi: support system power protocol

[Cristian Marussi]

On Fri, Mar 01, 2024 at 12:41:29AM +0000, Peng Fan wrote:
> > Subject: Re: [PATCH] dt-bindings: firmware: arm,scmi: support system power
> > protocol
> > 
> > On Tue, Feb 27, 2024 at 01:01:41AM +0000, Peng Fan wrote:
> > > > Subject: Re: [PATCH] dt-bindings: firmware: arm,scmi: support system
> > > > power protocol
> > > >
> > > > On Mon, Feb 26, 2024 at 01:28:31PM +0000, Cristian Marussi wrote:
> > > > > On Mon, Feb 26, 2024 at 09:02:43PM +0800, Peng Fan (OSS) wrote:
> > > > > > From: Peng Fan <peng.fan at nxp.com>
> > > > > >
> > > > > > Add SCMI System Power Protocol bindings, and the protocol id is 0x12.
> > > > > >
> > > > > Hi,
> > > > >
> > > > > yes this is something I spotted in the past it was missing and I
> > > > > posted a similar patch but I was told that a protocol node without
> > > > > any specific additional properties is already being described by
> > > > > the general protocol node described above.
> > >
> > > Without this patch, there is dtbs_check warning.
> > >
> > > scmi: 'protocol at 12' does not match any of the regexes: 'pinctrl-[0-9]+'
> > > from schema $id:
> > > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevic
> > >
> > etree.org%2Fschemas%2Ffirmware%2Farm%2Cscmi.yaml%23&data=05%7C0
> > 2%7Cpen
> > >
> > g.fan%40nxp.com%7Ccac77deb5f6a4b20460a08dc392ead40%7C686ea1d3b
> > c2b4c6fa
> > >
> > 92cd99c5c301635%7C0%7C0%7C638448119832543335%7CUnknown%7CT
> > WFpbGZsb3d8e
> > >
> > yJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D
> > %7C0%
> > >
> > 7C%7C%7C&sdata=6MldIOUQ4hxn%2BRffwJJJ3jxXXtHCSxLUOa4JMWB0htU%
> > 3D&reserv
> > > ed=0
> > >
> > 
> > Why are you adding protocol at 12 to the device tree ? Does it have a
> > dedicated channel ? If not, you shouldn't need to add it.
> 
> No dedicated channel.
> The idea is we have multile Agent, the M7 agent may ask to shutdown Linux
> Agent. So the linux agent need use protocol at 12 to do the action.
> 

Ok, so indeed you need, AFAICR, the node in the DT even without a
dedicated channel nor anynone referring it: no DT node means no protocol
initialization.

> For now, we have not finish implementing this in linux side, just add
> the node in dts.

On the linux side you should not need to do anything but adding the node
@12, the existent drivers/firmware/arm_scmi/system_power_control.c
driver when loaded will shutdown the system upon receiving the SytemPower
notification....what lacks Linux side in these regards ?

Thanks,
Cristian