[PATCH v5 7/7] arm64: dts: qcom: sc7280: Add DT nodes for the TBUs

[Georgi Djakov]

Hi Krzysztof,

On 29.02.24 19:55, Krzysztof Kozlowski wrote:
> On 26/02/2024 18:22, Georgi Djakov wrote:
>> Add the device-tree nodes for the TBUs (translation buffer units) that
>> are present on the sc7280 platforms. The TBUs can be used debug the
>> kernel and provide additional information when a context faults occur.
>>
>> Describe the all registers, clocks, interconnects and power-domain
>> resources that are needed for each of the TBUs.
>>
>> Signed-off-by: Georgi Djakov <quic_c_gdjako at quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/sc7280.dtsi | 89 ++++++++++++++++++++++++++++
>>   1 file changed, 89 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> index 83b5b76ba179..cc42560f63ad 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> @@ -2905,6 +2905,18 @@ adreno_smmu: iommu at 3da0000 {
>>   			dma-coherent;
>>   		};
>>   
>> +		gfx_0_tbu: tbu at 3dd9000 {
>> +			compatible = "qcom,qsmmuv500-tbu";
>> +			reg = <0x0 0x3dd9000 0x0 0x1000>;
>> +			qcom,stream-id-range = <&adreno_smmu 0x0 0x400>;
> 
> Where are the clocks/interconnects/power-domains? Your binding said it
> is exactly (100%) the same as SDM845, so either binding is missing
> compatibles or this is incomplete.

The clocks/interconnects/power-domains are optional and each of them could
be present or not. And that's why none of these properties are listed as
"required".

BR,
Georgi